1. Global Air Sampler Systems
Options for
Global Air Sampler Systems
Rev.: November 10, 2016

2. Global Air Sampler Options
Meteorological Station
Electrical Surge Protection Devices
Ruggedized Cellular Phone Data Interface System
GASdaq Data Acquisition PC Software
5. Integration of a Second F&J Digital Sampler

3. Meteorological Station Global Air Sampler Systems
WS-110
Measured Parameters Accuracy
Wind Speed ± 2 knots
Wind Direction < 4° per second average error
Temperature ± 1.1°C
Humidity ± 5% R.H.
Barometric Pressure ± 2 mbar

4. Meteorological Station Global Air Sampler Systems
WS-110
LOW VOLUME System
HIGH VOLUME System

5. Electrical Surge Protection REMP Air Sampling Systems
For
REMP Air Sampling Systems
FJ-SSI-AS-02
Dimensions: 7.3”L × 4.8”W × 2.5”H
Weight: lbs. (.90 kg)
Receptacles: Two (2) 125VAC, 15A standard USA female grounding receptacles powered by one standard USA male plug
Test Standard: IEEE Std C TM– 2002 and IEEE Std C62.62TM—2010

6. Electrical Surge Protection High Volume Air Sampling Systems
For
High Volume Air Sampling Systems
FJ-SSI-02E-UK
FJ-SS-HLASE
Dimensions: 8”L × 8”W × 4.4”H (20.3 x 20.3 x 11.2 cm)
Weight: 5.8 lbs. (2.6 kg)
Receptacles: Two (2) 250VAC, 13A United Kingdom (UK) style grounding receptacles. This unit can be factory installed in the HV/LV air sampler at the time of fabrication or retro fitted to older air samplers with only minor changes.
Test Standard: IEEE Std C TM– 2002 and IEEE Std C62.62TM—2010

7. Ruggedized Cellular Phone Data Interface System For
F&J Global Air Sampler Systems
Ruggedized Cell Phone System Features
Network Operation: CDMA, GSM or Wi-Fi
server settings
SMTP Server
SMPT Port
Sender Address
Sender Password
SMS Text Settings
Operator Selectable Engineering Units
Flow: SCFM, SLPM, SCCM, sm3/hr, Sm3/m
Temperature: °C, °F
Pressure: Atm, InHg, mmHg, bar, kPa, mbar, or hPa
Operator Selectable E mail Frequency: 10 seconds to 12 hours
Operating Tempeture: -30°C to 60°C (-22°F to 140°F)
Operating Humidity: 95%; non-condensing
Certification: MIL-STD-810G

8. Data Concentrator Specifications
Power supply: 9V DC, minimum 800Ma
Power connector: Barrel connector jack, 2.0mm ID, 5.5mm OD, center positive
Power protection: Reverse polarity protected
Instrument connections: Up to 4 bidirectional RS-232 (RX, TX, GND)
RS-232 connectors: 9 position D-Sub male (DB9M)
Phone connection: USB 2.0 (host/OTG)
USB capability: Data and charge
USB connector: Micro USB
Mating USB cable: Micro-A OTG (must use supplied red cable, regular USB cable
will not work)
Power indicator: Red LED
Operation indicator: Yellow LED (phone is connected and application is running)
Processor: 16 bit embedded flash microcontroller
Operating temperature: -25°C to +65°C
Panel size: 3.0" x 3.9"
Main Screen
Main Screen 

9. Data Acquisition Software Program Description
Global Air Sampler
Data Acquisition Software Program Description
“GASdaq”
Standard Air Sampling Mode
User Settings Screen

10. Data Acquisition Software Program Description
“GASdaq”
Standard Air Sampling Mode
Main Screen during Operation

11. Data Acquisition Software Program Description
“GASdaq”
Standard Air Sampling Mode
Main Screen after Termination of the Sample Event

12. Data Acquisition Software Program Description
“GASdaq”
Standard Air Sampling Mode
Management Report for GASdaq in Standard
Air Sampling Mode

13. Data Acquisition Software Program Description
“GASdaq”
Standard Air Sampling Mode
Management Report Chart

14. Data Acquisition Software Program Description
“GASdaq”
Standard Air Sampling Mode
Data Records Table in Standard Air Sampling Mode

15. Data Acquisition Software Program Description
“GASdaq”
Standard Air Sampling Mode
Alarms Settings in Standard Air Sampling Mode
Operator selectable alarms are
available for:
Flow deviation
High inlet pressure
Low inlet pressure
High temperature
Low temperature
Inlet pressure drop due to dust loading

16. Data Acquisition Software Program Description
“GASdaq”
Standard Air Sampling Mode
Data Chart

17. Data Acquisition Software Program Description
“GASdaq”
Standard Air Sampling Mode
Data Chart with Alarm Event

18. Data Acquisition Software Program Description “GASdaq”
Second Air Sampler Integration
(DFM Mode)
Main Screen in DFM Mode (Measurement in process)

19. Data Acquisition Software Program Description “GASdaq”
Second Air Sampler Integration
(DFM Mode)
Termination Screen
Data Record Table DFM Mode

20. Data Acquisition Software Program Description “GASdaq”
Second Air Sampler Integration
(DFM Mode)
Data Charts in DFM Mode
Additional Field for DFM Mode Option

21. Data Acquisition Software Program Description
“GASdaq”
Weather Station Mode
Main Screen in Weather Station Mode (Measurement in process)

22. Data Acquisition Software Program Description
“GASdaq”
Weather Station Mode
Alarm Settings Screen

23. Data Acquisition Software Program Description
“GASdaq”
Weather Station Mode
Data Records in Weather Station Mode
Data Charts in Weather Station Mode