1. Amphenol Outdoor Connectors
PT/LC
Duplex LC based outdoor connectors and receptacles
PT/MPO
MT/MPO based outdoor connectors and receptacles
AARC (ODC® Compatible)
2 or 4 fiber sealed connectors and receptacles
NODE Cables
2 to 24 fiber optical transport and CATV node assemblies
Custom Fiber Optic Assemblies
Custom configurations using Breakout, Distribution and OSP cable
R2CT
Field Installable sealed assembly housing
TxRx Outdoor Direct Pluggable
LC/SFP
RJ/SFP
ODC is a trademark of Huber & Suhner

2. PT/LC Receptacles & Assemblies
Sealed Two Fiber Circular Interconnect
LC Based optical interface
Factory Terminated Cable Assemblies
Flange Mount or Jam Nut Receptacles
Suitable for Indoor or Outdoor applications
Available with Single mode or Multimode fiber
IP67 dust and water protection
Scoop Proof interface to protect the fiber
Easy access to clean and inspect the fiber endface
Shielded connector housing
Vibration Resistant Mil-Spec bayonet or threaded coupling styles available
Applications:
WiMax and LTE radio enclosures
2G, 3G, and 4G Wireless systems
Base Station
Portable Broadcast Equipment

3. PT/MPO Receptacles and Assemblies
Sealed Multi-Fiber Circular Interconnect
MPO Based optical interface
4, 8, 12 or 24 fiber factory terminated cable assemblies
Flange Mount or Jam Nut receptacles
Suitable for Indoor or Outdoor applications
Available with Single mode or Multimode fiber
IP67 dust and water protection
Easy access to clean and inspect the fiber endfaces
Shielded connector housing
Vibration Resistant Mil-Spec bayonet or threaded coupling styles available
Applications:
WiMax and LTE radio enclosures
2G, 3G, and 4G Wireless systems
Base Station
Portable Broadcast Equipment

4. AARC Circular Indoor / Outdoor Assemblies
Sealed Two or Four Fiber Circular Interconnect
Factory Terminated Plug and Receptacle Assemblies
Flange Mount or Jam Nut Receptacles
Suitable for Indoor or Outdoor applications
Available with Single mode or Multimode fiber
Ceramic 1.25mm ferrules
Based on the “N” Type Connector
IP67 dust and water protection
Scoop Proof interface to protect the fiber
Intermateable with ODC® Connector
Applications:
WiMax and LTE Remote Radio Heads
2G, 3G, 4G Wireless systems
Base Station
Portable Broadcast Equipment
*ODC is a registered trademark of Huber & Suhner.

5. Node Cable Assemblies Outdoor Node Assemblies Two to twelve fibers
Stainless steel or polymer housing
Standard SCTE 5/8”-24 threaded interface
Multiple O-ring design seals for moisture protection
Anti-Twist design allows for easy installation without housing disassembly
Color coded 2mm jacketed or 900um breakout
Accommodates Single Mode or Multimode fiber
ONFR or armored cable constructions available
Available with most industry standard connectors
Applications:
CATV Distribution Nodes
Optical Transport and processing equipment

6. Custom OSP Cable Assemblies
Customized Cable Assemblies
Factory Terminated Cable Assemblies
Specific cable size and constructions
Indoor/outdoor, Armored, ONFR, LSZH, CLT, Distribution, Breakout
Custom furcation and breakout lengths
Custom marking or labeling
Specific lengths and tolerances can be defined
Most industry standard connectors are available
Optional hardware can be installed
Pulling Eyes, Cable Clamps, Sealing Glands
Applications:
Datacomm
Telecomm
Industrial
Campus

7. R2CT Field Installable Connector
The R2CT Field Installable Weatherproof Cable Gland is designed as a cost effective means of providing a removable interface for applications requiring protection from wet or dirty environments
Features:
Field Installable
Compatible with Optical LC or Copper RJ45
IP-65 water and dust sealed interface when fully mated or dust caps installed
Dual Sourced – Licensed from Radiall
Corrosion resistant aluminum housing
Plug dust cap with pulling eye protects connectors during installation
Mated Plug and Receptacle with Optical LC Cable Assembly
Plug Kit (Field Install Assembly)
Receptacle

8. TxRx Direct Pluggable Outdoor Assemblies
Common housing for Optical LC and Copper RJ-45 interconnect
Allows direct connection to commercially available SFP (LC Duplex) transceivers or RJ-45 jacks, no internal jumper needed
Optical SFP attaches to cable assembly for installation and use ensuring optimal reliability
Factory terminated optical Assemblies
Factory or field terminated RJ-45 assemblies
Designed for Outdoor applications with IP67 dust and water ingress protection and corrosion resistance
Available for Single mode or Multimode optical cable and Cat 5, Cat 5E, or Cat 6 copper cabling
Design seals both connection interface and coupling region preventing moisture or ice from forming within the latching area
Optical Duplex LC
Copper RJ-45

9. Demarcation Options Enclosures:
Can be provided empty (breadboard style back panel) or populated with cable routing, splice trays, power distribution, and adapter plates.
Potted Breakout Assemblies:
Outdoor rated and can be customized to the cable and breakout requirements needed. Available for fiber or hybrid cable applications.
In-Line Demarcation
Compact sealed plastic housing with form fitting grommet.