1. Environmental Awareness Training
Cleveland, TN
2017

2. Aspects & Impacts Overview
Aspects – operational process that poses environmental risk
Impacts – the impact the operational process has on the environment
Aspects
Impacts
Metal Fabrication
Energy consumption, recycling scrap metal
Painting and coating operations
Water consumption, energy consumption, wastewater discharge, non-hazardous waste, air emissions
Forklift operations
Burning propane gas, disposal of electric batteries
Packaging waste
Disposal of banding, bubble wrap, etc.
Aerosol & Touch up Paint
Volatile organic compounds (VOC) emissions

3. Air/Energy
When possible, help conserve energy by powering down or “hibernating” workstations when unattended.
Report air leaks when observed
Make sure exhaust fans are operating within range.
ATS will ensure filters and PM compliance is sustained.
When observing “abnormal conditions” with critical equipment (i.e. paint lines, wastewater treatment, etc.) report immediately to supervisor.
Submit a Vision if you have ideas how we can improve our energy use.

4. Water Use Report any leaks in area.
Reduce water and consumption whenever possible.
Eaton has installed automated faucets & toilets to save water
Additional flow meters are being installed to better understand our water consumption.
Eaton establishes goals and objectives each year for water reduction
Submit a Vision if you have ideas how we can improve our water use.

5. Water Impacts Storm Water Waste Water
Don’t leave debris or chemicals outside exposed to rainfall
Don’t dump any chemicals on the ground
Report any spills/leaks observed immediately
Repair leaks on vehicles to prevent oil runoff
Site is transitioning to a National Pollutant Discharge Elimination System (NPDES) permit and will require periodic testing in the future.
Waste Water
Don’t dump any chemicals or industrial material down the drain
All water discharge must meet pre-treatment standards
Site has a discharge permit that allows for “pre-treated” water to be sent to sewer district.
If operators observe any “abnormal conditions,” they should be reported to your supervisor immediately.

6. Waste Waste streams on site include: Cardboard
General Trash (landfill)
Universal Waste (batteries, CFLs, etc.)
Recycling (bottles, cans, paper)
Scrap metal (steel, copper, aluminum, etc.)
Non-Hazardous Industrial Waste (oils, paint line waste)
Hazardous waste (Aerosols, waste paint, etc.)
Please segregate your waste and help us recycle.
Our site is a Conditionally Exempt Small Quantity Generator (CESQG) – which means we generate <220lbs of hazardous waste per month.
Only trained personnel should handle Universal Waste and hazardous waste.
Submit a Vision if you have ideas how we can reduce our waste generation.

7. Environmental Playbook
All projects discovered during reviews must be submitted into GEM database and tracked during monthly operations review
GHG
Sites participating in ENEROC program (Top – 10) to continue with implementing metering equipment and generating projects based on results
Re-deploy Lighting and Compressed Air Leak surveys and HVAC equipment for efficiencies/upgrades – implementing projects based on results
Train employees on how they contribute to the overall objective
Water
Re-deploy/Review water map/balance to understand biggest contributors to water usage – implement projects based on results and train employees on how they contribute to the overall objective
Waste
Re-deploy/Review Waste Inventory to understand where our waste in generated, what waste is going to landfill and generate projects to reduce generation on biggest contributors.
Re-connect with Heritage for waste disposal (NA region) for current opportunities for disposal practices
Ensure recycling program is implemented and employees are trained on their participation and the objective
Submit a Vision if you have ideas how we can reduce our waste generation.

8. Environment Metrics for CTN
Corporate establishes Sustainability Metrics
3% Reduction for Water and Waste
0% (Flat) Reduction for GHG
Environmental Activities/Projects
Discover, promote and implement
Learn from others – Share best practices
Submit a Vision if you have ideas how we can reduce our waste generation.