1. FINAL EXAM REVIEW

2. Scientific Method & Measurement

3. Scientific method and experimental design
Each experiment begins with a purpose or problem. This is usually in question form and poses an if… (manipulated variable), then… (responding variable) situation.
Example: How does the temperature of the water effect the activity of turtles?
What is the manipulated variable
in this experiment?
Temperature
What is the responding variable
The activity of turtles

4. The next part of the experiment is the hypothesis
The next part of the experiment is the hypothesis. This is an educated guess based on observations and gathering background information. It is also called an inference.
The materials list and procedure follow the hypothesis.
Data is collected and interpreted.
A conclusion is reached based on the analysis of the data. The conclusion includes a statement as to whether the hypothesis was supported by the data collected during the experiment.

5. There are 2 types of variables in an experiment
Manipulated variable is the part of the experiment that you as the scientist are testing. You are testing to see if a new flavor for jelly beans would be everyone’s favorite – The new flavor would be the manipulated variable.
New flavor
2. Responding variable is what happens as a result of your experiment. In the experiment described above, this variable would be how many monkeys chose the new flavor as their favorite.

6. Steps for Setting up Graphs
Effect of temperature on turtle activity
Label the x and y axis. Be sure your label includes units!
Number each axis. When you set up each axis be certain that the distance between each number is the same.
Give your graph a title. A title should describe what the graph is about.
Plot the points carefully and connect the dots. Y
Manipulated variable
Temperature in Co
Turtle
Activity
In strokes
Per
minute X

7. Measuring Volume Volume is the amount of space an object takes up.
The unit for volume is cm3 or mL.
Volume can be determined in 3 ways:
Liquids- use a graduated cylinder
Regular shaped object: V=L x W x H
Irregular shaped object - use a graduated cylinder to measure the amount of water the object displaces.

8. Measuring Length Length is the distance between two points.
The unit for length is meters (or cm, or mm).
Use a meter stick to determine this measurement.

9. Measuring Mass Mass is the amount of matter in an object.
Mass is measured using a triple beam balance or an electronic scale.
The unit for mass is grams.

10. Density
Density is the amount of mass in a given unit of volume for an object.
In other words, density is how tightly packed the molecules are in a substance.
The unit for density is g/cm3 or g/ml.

11. Measuring density
The density of an object remains the same regardless of the size of the object.
The density of water is 1g/cm3.
Objects with a density less than 1 will float in water and a density greater than 1 will sink in water.
Density is determined by dividing the mass by the volume.

12. Using the microscope and measuring field of view
If each of the boxes of this field of view is equal to 1 mm, what is the length of this insect on the slide? What is the height of the insect? Remember that measurements in the metric system are not expressed in fractions. So ½ would be .5 mm.
1.0 mm
The distance from one side of the field of view can be determined by counting the number of boxes across the field. In this case the field would be 4.0 mm across.
4.0 mm

13. Using the Microscope
When the microscope is in low power you can use the coarse and fine adjustment to view the object on the slide.
Under low power, the field of view and the object on the slide will appear very small.
When you change the magnification from low to medium power, the object will appear to be larger, and you will see more details.
When you change from medium to high power, you will see less of the object because it will appear much larger. However, you will see a lot more detail!
REMEMBER: Never use the coarse adjustment knob under high power!

14. Using the Microscope
When you move the slide to the left while you are looking at the object, it will appear to move to the right. When you move the object away from you, it will appear to be moving toward you.
If you wanted to place the insect in the center of the field, how would you move the slides?
Up & to the left
To the right