Presentation is loading. Please wait.

Presentation is loading. Please wait.

Android Tablet Diagnostic Tool A200

Similar presentations


Presentation on theme: "Android Tablet Diagnostic Tool A200"— Presentation transcript:

1 Android Tablet Diagnostic Tool A200

2 Start the Diagnostics Application
After updating the unit using the ServiceROM please click through installation process and skip the registration.

3 Start the Diagnostics Application
Go to the applications tab and start the ACTP application.

4 Select tests Select the tests you want to execute on the tablet.
You can also start all tests by selecting Auto Run.

5 Test item – 1.Multitouch (Touch Panel)
Use your finger to touch the yellow area as above screen and draw it along the square. The result is pass if you fill all yellow area then it jumps back to main menu.

6 Test item – 2.Touch Linearity (Touch Panel)
User your finger touch the yellow area as above screen and draw it along the “X”. The result is pass if you fill all yellow area then it jumps back to main menu.

7 Test item – 3.RGB (Display)
Finish Tap screen, the colour on the display changes. Use this test item to see any abnormal lines or dead pixels on LCD screen.

8 Test item – 4.HWKeys (Keys)
Press volume up, volume down and lock keys to verify that all keys work. Color changes to green means key function works.

9 Test item – 5.Front Camera
To take a picture click on the blue button, afterwards click on “done”. When the taken picture is ok, you can “pass” it in the next step.

10 Test item – 6.Speaker You´ll hear a loud noise from speaker. Starting on left speaker and changing to right speaker.

11 Test item – 7.Microphone Tap screen to start the test. The microphone will be opened. You´ll see “recording...” sounds will now be recorded. A few seconds later the replay of the recorded sound will start. Afterwards select “Pass” if the recording was ok.

12 Test item – 8.SD Card Insert a micro SD card into the device. Start the test by touching the screen. After successful testing you´ll see the SD unmounted. Afterwards please plug out the SD card and select “Pass”.

13 Test item – 9.Vibrator The vibrator test will cause the unit to vibrate three times. When the test was successful please select “Pass”.

14 Test results At the end you´ll get an overview about the test results.

15 THANK YOU


Download ppt "Android Tablet Diagnostic Tool A200"

Similar presentations


Ads by Google