1. Materials Training
11/10/2018

2. Metal Section
11/10/2018

3. Material Knowledge
Following Materials are being used in Metal Section:
Mild Steel (MS) [Pipe, Rod, Sheets)
Stainless Steel (SS) [ Pipes, Rods, Sheets]
Brass [ Rods, Sheets]
Aluminum [ Different Shapes according to requirements]
Copper Sheets
11/10/2018

4. 1. Mild Steel (MS) Less expensive material
Usage:
MS is being used in chairs, jamb frames, work stations, side racks, side tables, open shelves, doors (main gate), bed clumps etc.
11/10/2018

5. Sizes Pipes Pipes of MS are used in following sizes w.r.t. each shape
Round: mm
Square: 6-125mm
Rectangular: mm
11/10/2018

6. Rods Rods of MS are used in following sizes w.r.t. each shape
Round: mm
Square: 6-38mm
Rectangular: 6-38mm
11/10/2018

7. Mild Steel Sheets Mild steel sheets are being used in: Doors Wardrobes
Kitchen
11/10/2018

8. 2. Stainless Steel (SS) Expensive material as compared to MS
Usage:
SS is being used in kitchen accessories, island units, corners, top base (e.g. corian), brackets, baskets, studs
11/10/2018

9. Sizes Pipes Pipes of SS are used in following sizes w.r.t. each shape.
Round: mm
Square: 12-75mm
Rectangular: 12-75mm
11/10/2018

10. Rods Rods of SS are used in following sizes w. r. t. each shape
Round: mm
Square: 12-50mm
Rectangular: 12-50mm
11/10/2018

11. Stainless Steel Sheets
Stainless steel sheets are being used in:
Doors kick plates
Panels (Kitchen)
Sink
Ducting etc.
11/10/2018

12. 3. Brass Brass is being used in: Doors studs, Island units, Brackets,
Usage:
Brass is being used in:
Doors studs,
Island units,
Brackets,
Table vanity,
Kitchen hinges and pivot hinges etc.
11/10/2018

13. Sizes Brass is being used in following sizes w.r.t. each shape.
Sheets: 2’-3’
Rods: 3-50mm (length of rod is 12’)
11/10/2018

14. 4. Aluminum Aluminum is being used in Partitions Wardrobes Doors
Usage:
Aluminum is being used in
Partitions
Wardrobes
Doors
Table, side tables
Mirror frames etc.
11/10/2018

15. Sizes Aluminum is bought as requirements and desired shapes.
Normally length of 10’ and 12’ is being used
11/10/2018

16. 5. Copper Copper is bought in following finishes: Brush Finish
Glass Finish
Hammer Finish
Sheets are available in 3’ x 4’ in different gauges
11/10/2018

17. Thanks for listening
Any Questions?
11/10/2018