1. RESCUE BOAT DAVIT
CME Models: D & D

5. Davit Specifications Model D39-11.5-11-24 Model D50-14.75-11-24
SOLAS/ABS/USCG Certification & Approval
SWL 3,100 LBS (1409KG)
Electric Hoist – 2,800 lbs. at 60 FPM
Electric Hoist Motor – 8.25 HP
Electric Slew Motor – 5.4 HP
Gravity Lower 180 FPM (55m/min)
Electric Slew Speed – RPM
Launch and Recovery Vertical Distance – 50 ft.
Slewing – 360° Electric and Manual
Emergency Slew – by hand
Emergency Hoist – by hand
Operational Condition – 20° List – 10° Trim

6. Main Electric Hoist
Electric Hoist Motor with Failsafe Caliper Brake – for controlled drag braking
Removeable Emergency Handwheel – for manual operation
Sprag Clutch – allows for controlled freefall
Stainless Steel Brake Disc
Limit Switch – stops power to hoist motor

7. Boom Details Mounted to boom Wired to starter box Switch inside cover
Boom mounted
flood light
Mounted to boom
Wired to starter box
Switch inside cover

8. All pins are made of 17-4 stainless steel
Sheave is made of machined stainless steel
Boom consists of heavy duty welded steel construction with anti-2-block, to limit the height of the hook
Permanently lubricated bushing – means no more trouble with sheaves not turning

9. Eagle USCG Approved Release Hook
Hook operation is off-load only
Hook certification provided upon delivery
Rescue Boat Davit Release Hook

10. Self-contained, no hydraulic fluid Clean, efficient Low Maintenance
Removable cover for manual slew operation
The slewing drive train consists of a planetary reducer through an electric brake motor enclosed in the davit column.
Added benefits:
Self-contained, no hydraulic fluid
Clean, efficient
Low Maintenance
Electric Slew Motor – 110V Space Heater
Planetary
Reducer

11. Permanently lubricated slew bushings are mounted inside the column, riding on stainless steel wear plates.
Standard 24” tall mounting pedestal

12. Why CME Rescue Boat Davits?
Manufactured in the USA
Domestic Service and Support
No more long lead time for replacement parts. Coastal Marine Equipment is stocking all key components to eliminate future down times due to the rescue boat davit.
Maintenance friendly design
No more accumulator to corrode or leak and no hydraulic leaks. Our davit is 100% electric. Electric slew motor is mounted inside the column, the electric hoist is IP56 rated mounted to the underside of the boom.
No more slewing gear/gear teeth to corrode or replace. Our new davit incorporates permanently lubricated slew bushings mounted inside the column riding on stainless steel wear plates.
Anti rotation, galvanized wire rope with hook pre-rigged to the davit.
Electric motors and control panel include anti-condensation heaters.
Stainless steel fasteners ½” and smaller
Teflon® coated fasteners larger than ½”
Corrosion Protection – All steel parts are blasted and painted using Coastal Marine’s three-part marine duty paint system (zinc-based primer, epoxy intermediate coat, and epoxy topcoat.