Presentation is loading. Please wait.

Presentation is loading. Please wait.

Boom Lift and Scissor Lift UNIVERSAL STUDIOS

Similar presentations

Presentation on theme: "Boom Lift and Scissor Lift UNIVERSAL STUDIOS"— Presentation transcript:

1 Boom Lift and Scissor Lift UNIVERSAL STUDIOS
Aerial Lift Training Boom Lift and Scissor Lift UNIVERSAL STUDIOS

2 Course Overview Universal Studios Site Policies General Regulations
Terms and Operational Overview Pre-start inspections Capacity and Equipment Ratings Safety Procedures Power Lines Starting and Operation the Lifts Work Safety / Operating Rules Fall Protection

3 UNIVERSAL STUDIOS Fall protection height Working around guests
Working in teams of 2 Special situations while working on rides Parking lifts Use of lifts compared to Camera Booms Pre-start inspections

4 General Regulations The operator is responsible for the lift and its safe operation at all times The operator is responsible for performing inspections The supervisor is responsible for making sure they are done The operator is responsible for making sure anyone in the lift has fall protection Full body harness is mandatory

5 Lift Terms & General Information
Types of Lifts Manual vertical aerial platforms Powered aerial platforms Boom supported platforms General types of lifts Scissor Lift Boom Lift Articulation Boom Lift Bucket Truck Aerial Ladder

6 Maximum Height Working height is from ground to top of operators head when fully raised Platform height is from ground to the bottom of the platform when fully raised

7 Capacity Ratings All lifts have a maximum capacity
Listed on the data plate Includes all workers, tools and materials spread evenly over the platform Boom lift load ratings A lever machine which uses 2 wheels as fulcurm The weight is counterbalanced by the weight on the opposite side of wheels Boom capacity based on specific load at specific distance from wheels Scissor lift capacity Platform directly over the tires and lifted straight up.

8 Safety Procedures Basic Rules Check work area for hazards
Maintain specified distances from power lines Never allow ground personnel near machine Never allow anyone to pass underneath Wear approved fall protection When unattended lower lift and prevent unauthorized access Use all available safety and protective devices

9 Checking Equipment Check for missing or unreadable signs
Check for broken, missing or loose parts Check pivot pins Check tires Check welds Check hydraulic system Check outriggers, stabilizers or axels Check upper and lower controls Check platform, guard rails and gates

10 Checking Work Area Check Ground or Floor Inspect area to be traveled
Clean up oil spills Plan your work area approach Find a level area to lift from Make sure your overhead area is free from obstructions or power lines

11 Operations Mount the lift properly 3 points contact Face the machine
Make sure shoes are clean Use handrails to enter machine Never use controls as handholds Never mount a moving machine Never climb the elevating assembly Enter and Exit from the ground only Approved entry and exit point when available

12 Operational Safety Know the capacity and never exceed it
Disperse load evenly Do not carry materials on railings Do not use lift as a crane Only the certified operator should operate the controls Operate the controls smoothly Only use controls from operator station

13 Never override any safety device or alarm
Never leave platform to an elevated location unless it is approved by the manufacturer Never override any safety device or alarm Never drive up to someone standing in front of a stationary object Never position the unit over someone Only travel in the full down stowed position Bucket down and bucket forward Pivot bucket when possible for ease of use

14 Raise and Lower Safety Make sure the machine is on level firm ground before raising Use outriggers when available Check clearance before raising unit If the unit becomes entangled call for help, do not try and use controls to disengage Never attach wires or cables to your unit

15 Work Safety Never use ladders, steps or other devices to provide additional reach Never lean or sit on railings Keep both feet on platform floor Never belt off to an adjacent structure when working on the platform Never use the structure as a welding ground Only attach lanyards to approved attachment points not the guardrails

16 Safe Shutdown and Dismount
Travel to suitable parking location Place platform in full down position Place controls in neutral Shut off engine Prevent unauthorized use Never dismount a moving machine Use 3 points of contact Face the machine Never jump from the machine

17 Fall Protection There are several types of fall protection, this class only discusses personal protection related to aerial lifts Overview Threshold of 6 feet for use of fall protection Some companies use 4 feet Prohibits body belts for fall protection

18 Personal Fall Arrest System
A personal fall arrest system means a system used to arrest an employee in a fall from a working level. It consists of an anchorage, connectors, a body harness and may include a lanyard, deceleration device, lifeline, or suitable combinations of these. A body belt cannot be used for fall arrest.

19 Requirements Connectors Dee Rings Snap Hooks
Drop forged, press or formed steel Corrosion resistant with smooth edges Dee Rings Minimum tensile strength of 5000 lbs Tested to minimum tensile load of 3600 lbs Snap Hooks Load and strength same as Dee Rings Must be locking type

20 Cont… Lanyards Self Retracting lifelines or lanyards
Minimum breaking strength of 5000 LBS Be attached to each worker separately Be protected against cuts and abrasions Self Retracting lifelines or lanyards Minimum tensile load of 3000 lbs if they limit the fall distance to 2 feet Minimum tensile load of 5000 lbs if they do not limit the free fall to 2 feet Ropes and Straps must be made from synthetic fibers

21 Cont… Anchorages Full Body Harness
Free from anchorages that support or suspend platforms Support at least 5000 lbs per attached worker or they must be designed and used in a personal fall arrest system that maintains a safety factor of at least 2 and is used under the supervisions of a qualified person. Full Body Harness Must be used only as a part of a personal fall arrest system The attachment point must be in the center of the back near shoulder level or above the head. Units with an attachment in the front can only be used for positioning not fall protection

22 General Fall Protection Requirements
Employers must properly rescue a working in the event of a fall or make sure they can raise themselves. No timeline on how quickly they must respond A personal fall arrest system must: Limit max force to 1800 lbs in a full body harness Not allow a fall more than 6 feet or come in contact with a lower level Bring worker to a complete stop within 3.5 feet Withstand 2 times the potential impact of a worker falling 6 feet or the free fall distance allowed by the system whichever is less

23 Cont… Be remove from service if used to prevent a fall
Be inspected by a qualified person or the manufacture if used to prevent a fall Not be attached to a guardrail or hoist If used in a hoist area, be rigged so that the worker can only travel to the edge of the work surface

Download ppt "Boom Lift and Scissor Lift UNIVERSAL STUDIOS"

Similar presentations

Ads by Google