1. Why are SITUATION and SITE FACTORS important?
KEY ISSUE 2
Why are SITUATION and SITE FACTORS important?

2. #___: Site & Situation Factors
In what region is most corn grown in the US?
Ethanol, a type of alcohol, can be manufactured from corn. What relationship do you see between where corn is grown and where ethanol plants are located?

3. sample FRQ

4. Companies use two geographic factors to choose locations for factories:
SITUATION Factors involve the costs of transporting raw materials and finished goods.
SITE Factors involve the unique characteristics of particular location.

5. Weber’s Least Cost Theory
Alfred Weber ( )
German economic geographer
Published Theory of Location of Industries in
“What is the best (most profitable) location for manufacturing plants?”
“Just because I’m old doesn’t mean I don’t know what I’m talking about!”

6. 3 major factors that determine location of manufacturing
1. transportation--most important to Weber
Raw materials (inputs) to factory
Finished goods (outputs) to market
Distance and weight most important factors.
2. labor
High labor costs reduce profit
May locate farther from inputs/ market if cheap labor can make up for added transport costs.
3. agglomeration
Similar businesses cluster in the same area.
Businesses support each other, reduce costs

7. INPUTS are the materials needed for production, like ores or components parts.
CAR COMPONENTS
IRON ORE

8. The farther something is transported, the higher the cost
The farther something is transported, the higher the cost. Thus, factories are located as close as possible to either inputs or markets.

9. If the cost of bringing raw materials to the factory is HIGHER than that of transporting finished goods, the factory is optimally located close to INPUTS.

10. If the cost of transporting finished goods is HIGHER than inputs, the factory is optimally located as close to the customer (market) as possible.

11. CERTAIN INDUSTRIES TRY TO LOCATE CLOSE TO MARKETS:
BULK-GAINING Industries
SINGLE-MARKET Industries
PERISHABLE Industries

12. Ex. Soft drinks, beer, auto manufacturing
BULK-GAINING industries are those whose finished products are heavier than inputs because weight is added during production.
Ex. Soft drinks, beer, auto manufacturing

13. The heaviest part of any drink is water.
Because water is available everywhere, beverage producers can ship lighter raw ingredients (bottles, syrups) to factories close to population centers (markets).

14. Potato chips are a good example of this.
BULK GAINING can also refer to an industry whose final products are HARDER TO SHIP than inputs.
STABLE INPUTS
Fragile & Bulky Product
Potato chips are a good example of this.

15. These industries locate close to customers to reduce shipping costs.
SINGLE-MARKET Industries are those that cater to a very limited number of purchasers, like a single industry or company.
These industries locate close to customers to reduce shipping costs.

16. Workers making seats for Fiat 500Ls
Car components are often built on contract by small manufacturers for large auto companies.
Workers making seats for Fiat 500Ls
Component factories are located as close as possible to CAR ASSEMBLY PLANTS.

17. The world’s largest zipper manufacturer, YKK, has one customer – the garment industry.
YKK produces zippers in factories all over the world, wherever major apparel industries can be found.

18. Remember VON THUNEN’S MODEL?
Producers of PERISHABLE products need to locate near consumers/markets to maintain the freshness of their products.
Remember VON THUNEN’S MODEL?

19. Newspapers are PERISHABLE
Newspapers are PERISHABLE. Their content is time-sensitive and can be outdated after only one day.
National newspapers, like the New York Times, are produced in locations around the country to reduce shipping lag.

20. BULK REDUCING industries are those whose finished products are lighter/have less volume than inputs.
Ethanol is extracted from the corn plant. Much of the plant is discarded in the process.

21. Copper is an example of a bulk-reducing mineral.
Metals are very useful for manufacturing because they are (mostly) malleable, durable, and can conduct electricity.
Copper is an example of a bulk-reducing mineral.

22. The main four modes are TRUCK, TRAIN, BOAT, & PLANE.
Manufacturers choose a their MODE OF TRANSPORT to match their situation and needs.
The main four modes are TRUCK, TRAIN, BOAT, & PLANE.
Over long-distances, ships tend to be most cost-effective.

23. Companies that use multiple transport modes utilize break-of-bulk points, which are locations where rapid transfer among different modes is possible.

24. As technologies and industries change, so do situation factors
As technologies and industries change, so do situation factors. An example is the evolution of the STEEL INDUSTRY from 1850 to today.

25. From the mid-19th through the early 20th century, American steel mills were located near inputs. As different inputs became more or less important, centers of production shifted.

26. Since the mid-20th century, proximity to MARKETS has become more important than proximity to inputs.
Finished steel is increasingly likely to be imported, and US production is increasingly focused on RECYCLING SCRAPS.

27. FIGURE INTEGRATED STEEL MILLS IN THE UNITED STATES Integrated steel mills are highly clustered near the southern Great Lakes, especially Lake Erie and Lake Michigan. Historically, the most critical factor in situating a steel mill was to minimize transportation cost for raw materials, especially heavy, bulky iron ore and coal. In recent years, many integrated steel mills have closed. Most surviving mills are in the Midwest to maximize access to consumers.

28. While the US was the world’s top steel producer in 1980, China holds that distinction today.
FIGURE WORLD STEEL PRODUCTION, 1980 AND 2010 The leading steel producer in 1980 was the United States, and in 2010 it was China.

29. Car manufacturers attempt to locate their factories close to profitable markets.
While cars were historically assembled in corporate-base countries (Germany, Japan) and shipped abroad by boat, today they are assembled in factories across the world close to markets.

31. MASSIVE TOYOTA PLANT IN BURNASTON, UK
Most cars driven in any of the three major industrial regions were built/assembled in that region.
MASSIVE TOYOTA PLANT IN BURNASTON, UK
FIGURE ASSEMBLY PLANT IN EUROPE Toyota’s factory near Burnaston, in the United Kingdom, is surrounded by farmland.

32. Most US auto production occurs in an area known as AUTO ALLEY, from Michigan to the US South.
Foreign carmakers take advantage of CHEAP LABOR in the South and Mexico; American carmakers focus production near their bases in Michigan and surrounding states.

33. Like in America’s AUTO ALLEY, auto manufacturers choose different sites for different reasons in EUROPE.
Some utilize skilled labor & high industry in Northern Europe; others choose to utilize much cheaper labor in Southern/Eastern Europe.
FIGURE MOTOR VEHICLE PRODUCTION IN EUROPE Within Europe, most vehicles are produced in an east–west corridor centered on Germany.

34. SITE FACTORS
Other than transportation costs (situation factors), THREE SITE FACTORS also largely determine where an industry will be located. These include:
LABOR
CAPITAL
LAND

35. LABOR
For some industries, reducing labor costs is key to profitability. They will locate wherever labor costs (wages, other compensation) are lowest.

36. LABOR-INTENSIVE industries are those where labor costs represent a very high percentage of their expenses. Textile manufacturing is one of the most labor-intensive industries.
The opposite- where labor costs are a relatively low percentage- are CAPITAL-INTENSIVE industries.

37. CAPITAL
Huge amounts of money are needed to construct and expand factories; industries locate wherever access to funds is most ready.

38. DETROIT AUTO INDUSTRY SILICON VALLEY
Some famous industrial regions developed because of the willingness of local lenders to invest.
Two examples include:
DETROIT AUTO INDUSTRY
SILICON VALLEY

39. DETROIT’S AUTO INDUSTRY
Lenders in Michigan were willing to invest heavily in the startup auto industry, while those on the East Coast closed their wallets to early auto investment.
You could get a Ford Model T in any color you wanted – as long as it was black!
FIGURE LABOR AS A SITE FACTOR: MANUFACTURING WAGES The chart shows average hourly wages for workers in manufacturing in the 14 countries with the largest industrial production in 2010.

40. SILICON VALLEY, the center of US technological innovation, takes advantage of the highly-skilled workforce in California’s Bay Area.
Silicon Valley is a technopole, a center of high-tech manufacturing and information-based quaternary industry.
INVESTORS REWARD COMPANIES LOCATING HERE WITH CAPITAL FOR OPERATIONS AND EXPANSION

41. Many early factories were multi-story buildings IN the city.
LAND
Most early industries located in cities, where there was access to markets, labor, and to important nodes of early transportation – rail and ship.
Many early factories were multi-story buildings IN the city.

42. Today, factories are designed on a single level, with an efficient stream of operations; materials enter one end, finished products exit the other.

43. Sprawling single-level factories require much more land than multi-level urban factories, so the land must be cheaper to buy.
This factor- along with increasing reliance on TRUCK transportation- has moved most newer factories into the SUBURBS.