Presentation is loading. Please wait.

Presentation is loading. Please wait.

Effective Methods to Test the Fuel Pressure Regulator in your Car.

Similar presentations


Presentation on theme: "Effective Methods to Test the Fuel Pressure Regulator in your Car."— Presentation transcript:

1 Effective Methods to Test the Fuel Pressure Regulator in your Car

2 The fuel pressure regulator is the important part of the fuel system in a car and located between the car's gas tank and carburetor.

3 As it is designed to keep the fuel line pressure of your car at a consistent valve which is helpful for the smooth operation of the engine.

4 If the car is running with high fuel, then the flap of the fuel pressure regulator will close and the excess fuel flow back to the gas tank.

5 But, if the car is running lean, then the flap will automatically open the fuel pressure regulator and allow the fuel to flow to the engine.

6 You can test the fuel pressure regulator of your car through the below points:

7

8 Before you test the pressure regulator of your car, first you need to locate the fuel pressure regulator by following the fuel line to the throttle body.

9 You can locate the pressure regulator at the throttle body because they are most likely attached near the throttle bottle assembly.

10

11 First, test the vacuum line leading into the fuel pressure regulator, remove the existing vacuum hose and replace it with clear plastic tubing.

12 Start the car and open the butterfly valve manually on the carburetor. But the leakage in the vacuum line allows the fuel and pressure to escape in it.

13 If the vacuum system of car is working properly, then replace the plastic tubing with the original vacuum hose and continue the troubleshooting process.

14

15 To test the pressure regulator, you can screw the regulator gauge which has a port in the car's fuel pressure regulator.

16 If a port is unavailable on the regulator, then attach the tester along the fuel rail assembly and look for a screw cap assembly along the fuel line.

17 Then unscrew the cap and screw the regulator gauge. Once you install the regulator gauge, turn the key to the on position and read the indicator on the gauge.

18 It should provide correct fuel system pressure in the car. If you start the car while watching gauge indicator, then it should increase by 5 PSI.

19

20 After testing the fuel pressure regulator, remove the fuel pressure gauge and reattach the screw cap to the regulator testing port.

21 Pick the necessary part of your fuel pressure regulator for repair and replace them according to your car's specification.

22 If you are neglecting the faulty fuel pressure, then it can indicate different problems in the engine and need more repair cost.

23 https://escondidogermanauto.com/


Download ppt "Effective Methods to Test the Fuel Pressure Regulator in your Car."

Similar presentations


Ads by Google