1. See more…Do more.

2. Facility Explorer Legacy FX Field Controller Wish List
Requested Feature/Enhancement
Our New FX Programmable Controller Line
Upload capability supported on all controllers 
Networkable sensors for all controllers
Addressable sensors (for averaging or hi/low select applications)
VAV controller with discharge air temperature and CO2 sensing
More Analog Outputs on controllers
More standard applications (like dual duct VAV, chiller plants)
Re-using application code across device types
View real-time data on application canvas during commissioning
Johnson Controls

3. FX-PC Series Programmable Controller Family
Introduction

4. Facility Explorer FX-PC Series Programmable Controllers
Role in the Facility Explorer System Architecture
Monitor and operate a wide variety of HVAC equipment
Central plants (chilled water and hot water systems)
Air handling units
Packaged equipment (rooftop units, heat pumps)
Terminal units (VAV boxes, fan coil units, unit ventilators)
Miscellaneous (exhaust fans, supplemental heating)
Networked together to communicate and exchange information:
with the FX Supervisory Controllers
with each other Peer-to-Peer (optional)
Johnson Controls

5. Single Programming & Commissioning Tool:
Facility Explorer Features Common to All FX-PC Series Programmable Controllers
Single Programming & Commissioning Tool:
Unified programming & commissioning tool for all models and types of FX-PC Programmable Controllers
Single tool used for all required controller interaction:
Programming
Simulating
Uploading and Downloading
Commissioning controllers
Upgrading firmware
Troubleshooting
Johnson Controls

6. Fully Programmable or Configurable:
Facility Explorer Features Common to All FX-PC Series Programmable Controllers
Fully Programmable or Configurable:
Includes a full library of Johnson Controls-designed and -tested control modules and logic
Allows you to create custom applications for unique control requirements
Programming tool also provides a System Selection Wizard
Allows you to quickly create standard applications for most common control requirements (configurable)
Check-the-box, question & answer style
Standard systems are built using the same factory-designed and -tested control modules and logic blocks
And are editable
Side Loop Wizard
Used for quickly adding auxiliary control logic
Johnson Controls

7. Advanced Control Technologies
Facility Explorer Features Common to All FX-PC Series Programmable Controllers
Advanced Control Technologies
State-Based Control
Ensures that only the specified control logic for any given state is executed
Avoids control inefficiencies (for example, simultaneous heating and cooling is prevented)
Processor utilization is optimized (speeds processing time)
Control response is optimized per state
Avoids sluggishness and over cycling by using different tuning parameters per state
Faster, more precise commissioning
Technician can simply select the state to commission
Continuous Adaptive Control (using PRAC+, PMAC, PVDC)
Continuously monitors and adjusts tuning parameters based on present and past conditions
Handles unmeasured load or process disturbances
Automatically adjusts to seasonal and setpoint changes
Johnson Controls

8. Field Controller (FC) Bus:
Facility Explorer Features Common to All FX-PC Series Programmable Controllers
Field Controller (FC) Bus:
Used for communication between the FX-PC Controllers and the FX Supervisory Controllers
Also used for Peer-to-Peer communication
BACnet MS/TP Master (ASHRAE Standard Protocol)
FX-PC Controllers are BTL tested and listed as a B-ASC (Application Specific Controller) to ensure interoperability
BACnet MS/TP
FC Bus
Johnson Controls

9. Flexible Inputs and Outputs:
Facility Explorer Features Common to All FX-PC Series Programmable Controllers
Flexible Inputs and Outputs:
FX-PC line consists of controller models with different combinations of onboard inputs and outputs
Usage of “universal” inputs and “configurable” outputs
Provides analog and binary type I/O capability using the same hardware channel
Network Sensors and Expansion Input/Output Modules may be added to the FX-PC Controllers to increase I/O capacity
Johnson Controls

10. Expansion Input/Output Modules
Facility Explorer Features Common to All FX-PC Series Programmable Controllers
Sensor and Actuator (SA) Bus:
Enables communication between the FX-PC Controller and a variety of networked devices:
SA Bus
Duct Sensors
Local Display
Room Sensors
Expansion Input/Output Modules
Variable Speed Drive
Tool Interface
Johnson Controls

11. Sensor and Actuator (SA) Bus:
Facility Explorer Features Common to All FX-PC Series Programmable Controllers
Sensor and Actuator (SA) Bus:
BACnet MS/TP Slave
SA Bus Device Capacity:
No more than 10: Actual # is dependent on power usage of the specific SA Bus device
SA Bus Distance Limits:
365m (1,200 ft.) maximum bus length for independently-powered devices
152m (500 ft.) maximum between NS Sensor and host FX-PC controller using screw terminals
30m (100 ft.) maximum between NS Sensor and host FX-PC controller using RJ terminal
Johnson Controls

12. Wireless Field Bus & Sensing Option:
Facility Explorer Features Common to All FX-PC Series Programmable Controllers
Wireless Field Bus & Sensing Option:
Provides wireless mesh networking at multiple levels in the system
Between FX-PC Programmable Controllers and FX Supervisory Controller
Between FX-PC Programmable Controllers and FX-WRZ Wireless Sensors
Supports hybrid wired + wireless architecture for maximum installation flexibility
No special controllers required
Modular components are field-added to FX-PCs to make them wirelessly communicate
Wireless, battery-powered sensors
FX Supervisory Controller
FX-PCV
FX-ZFR1811
Router A
FC Bus
FX-ZFR1810
Coordinator
FX-WRZ Wireless
Sensor A
FX-PCG
FX-WRZ Wireless
Sensor B1
FX-PCG
FX-ZFR1811
Router B
FX-WRZ Wireless
Sensor B2
FX-PCV
FX-WRZ Wireless
Sensor B3
FX-PCX
FX-WRZ Wireless
Sensor B4
FX-ZFR1811
Router C
Johnson Controls

13. FX-WRZ Wireless Sensor
Facility Explorer Features Common to All FX-PC Series Programmable Controllers
One-to-One Wireless Sensing Option:
Provides only wireless sensing (no mesh)
Between FX-WRZ Wireless Room Sensors and FX-PC controllers
SA Bus
FX-WRZ Wireless Sensor
FX-WRZ7850
Receiver
FX-PCV
Johnson Controls

14. Facility Explorer FX-PC Series Programmable Controller Family Members
General Purpose Programmable Controllers
Programmable VAV Box Controllers
Programming & Commissioning Tool
Expansion Input/Output Modules
Modular Accessories
Johnson Controls

15. FX-PCV Programmable VAV Box Controllers

16. Facility Explorer FX-PCV Programmable VAV Box Controllers
Optimized for Controlling VAV Boxes
Fully integrated assembly for simplified mounting & wiring
Small digital controller
Two versions:
Cooling only
Cooling with reheat and/or fan control
2 SA Bus ports
1 FC Bus port
Color-coded wiring terminals
Actuator
4 Nm, non-spring return, 60 second stroke time
Pressure transducer
Consistent air flow readings with minimal drift
Color-coded flow pickup tubes
Requires only minimal auto-zero calibration
Johnson Controls

17. Facility Explorer FX-PCV Programmable VAV Box Controllers
Feature
FX-PCV1610
FX-PCV1620
Universal Inputs
0-10 VDC
ohm resistive
Nickel sensor curve
Platinum sensor curve
Silicon sensor curve
Thermistor sensor curve
Dry contact maintained 1
Binary Outputs
24 VAC/0.5 A triacs 3
Configurable Outputs 2
Integrated actuator
Yes
Integrated pressure transducer
Intended Application
Cooling only VAV Boxes
VAV Boxes with reheat and/or fan control
Johnson Controls

18. Facility Explorer FX-PCV Programmable VAV Box Controllers
Common Uses for FX-PCV’s Sensor and Actuator (SA) Bus:
SA Bus
Duct Sensors
Local Display
Room Sensors
Expansion I/O Modules (for dual duct or slaved box applications)
Balancing Tool Interface
Tool Interface
Johnson Controls

19. FX-PCG General Purpose Programmable Controllers

20. Facility Explorer FX-PCG General Purpose Programmable Controllers
Flexible and Scalable for Wider Range of Applications
Four models
FX-PCG16: 10 total I/O (with or without integral display/keypad)
FX-PCG26: 17 total I/O (with or without integral display/keypad)
2 FC Bus ports
2 SA Bus ports
Optional, integral display/keypad for local user interface
DIN rail mounting clips
Integral mounting holes for surface mounting
Color coded wiring terminals
Prevent mis-wiring
Johnson Controls

21. Facility Explorer FX-PCG General Purpose Programmable Controllers
Feature
FX-PCG1611
FX-PCG1621
FX-PCG2611
FX-PCG2621
Universal Inputs
0-10 VDC or 4-20 mA linear
ohm linear
Nickel sensor curve
Platinum sensor curve
Silicon sensor curve
Thermistor sensor curve
Dry contact maintained (binary) 2 6
Binary Inputs
Dry contact maintained
Pulse counter (100 Hz) 1
Binary Outputs
24 VAC/0.5 A triacs 3
Configurable Outputs
24 VAC/0.5 A triacs (binary)
0-10 VDC (analog) 4
Analog Outputs
0-10 VDC
4-20 mA
Total I/O 10 17
Integral Display/Keypad No
Yes

22. Facility Explorer FX-PCG General Purpose Programmable Controllers
Common Uses for FX-PCG’s Sensor/Actuator (SA) Bus:
SA Bus
Duct Sensors
Local Display
Room Sensors
Expansion Input/Output Modules
Variable Speed Drive
Tool Interface
Johnson Controls

23. FX-PCX Expansion Input/Output Modules

24. Facility Explorer FX-PCX Expansion Input & Output Modules
Expands I/O Capacity for FX-PCGs and FX-PCVs
Have no internal control logic capability
Four models with various I/O counts and mixes
Shares common design with FX-PCGs
DIN rail mounting clips
Color coded wiring terminals
Johnson Controls

25. Facility Explorer FX-PCX Expansion Input/Output Modules
Feature
FX-PCX1711
FX-PCX2711
FX-PCX3711
FX-PCX4711
Universal Inputs
0-10 VDC or 4-20 mA linear
ohm linear
Nickel sensor curve
Platinum sensor curve
Silicon sensor curve
Thermistor sensor curve
Dry contact maintained (binary) 2 4 6
Binary Inputs
Dry contact maintained
Pulse counter (100 Hz)
Binary Outputs
24 VAC/0.5 A triacs 3
Relay Outputs
120/240 VAC
Configurable Outputs
24 VAC/0.5 A triacs (binary)
0-10 VDC (analog)
Analog Outputs
0-10 VDC
4-20 mA
Universal Outputs
4-20 mA (analog)
24 VAC/DC FET (binary)
Total I/O 12 17

26. Modular Accessories

27. NS Series Network Sensors

28. Facility Explorer NS Network Sensors
Connect on SA Bus of FX-PC Controller
Provides inputs to the FX-PC Controller without using onboard I/O channels
Types:
Room Sensors
Attractively styled enclosures for wall or flat surface mounting
80 x 80 mm or 120 x 80 mm
Temperature only, temperature & humidity, or CO2 level sensing
Optional onboard controls for occupants to adjust their comfort demands
Addressable for averaging or hi/low select (up to 4 per FX-PC controller)
Include a convenient, tool access port
Fan Speed Control Pushbutton
LCD Display
Dial for either warmer/cooler or setpoint adjustment
ºF/ºC Button
Johnson Controls

29. Facility Explorer NS Network Sensors
Types (continued):
Flush-mount wall sensor
Temperature only sensing
Stainless steel face plate
Thermally isolated from wall
Addressable (up to 4 per FX-PC controller)
Duct-mountable temperature sensors
Designed for discharge or supply air temperature sensing
4 in. or 8 in. probe
Addressable (up to 8 per FX-PC controller)
Johnson Controls

30. FX-DIS Local Controller Display

31. Facility Explorer FX-DIS Local Controller Display
Provides local user interface to FX-PCG or FX-PCV
Monitor input and output points
View system status
Adjust setpoints
Issue commands
Change occupancy
Remote Mountable
via SA bus
Front panel door mounting
Includes service port (SA/FC Bus)
Not available on FX-PCG models with integral display
Johnson Controls

32. Facility Explorer FX-DIS Local Controller Display
Display Features:
At-a-glance system status
Backlit LCD with user configured timeout
4 lines x 20 characters LCD
Selectable points and parameters
Tactile-feel keypad
Menu-based navigation
Customized user preferences (time/date format, password timeout)
Password protection
Johnson Controls

33. FX-ATV VAV Box Balancing Tool

34. Facility Explorer FX-ATV VAV Balancing Tool
Convenient, Portable VAV Balancing Tool
Allows user to easily view, adjust, and set the required parameters for VAV applications running in the FX-PC
dP offset
actual flow and flow setpoints
autocalibrate
box gain (K factor)
Balancing parameters are displayed on the tool’s LCD
Menu based navigation using the dial and pushbuttons
Menus are customized based on the application residing in the PC
Adjustable time-out automatically returns the controller to normal mode
Can plug into service port on the NS for convenient access (no ladder required)
Compatible with FX-PCVs and FX-PCGs running a VAV application
Johnson Controls

35. FX-ZFR Wireless Field Bus System

36. Facility Explorer FX-ZFR Wireless Field Bus System
Provides Wireless Networking At Multiple Levels in the System
Between FX-PC Programmable Controllers and FX Supervisory Controller
Between FX-PC Programmable Controllers and FX-WRZ Wireless Sensors
Supports hybrid wired + wireless architecture for maximum installation flexibility
No special controllers required
Modular components are field-added to FX-PCs to make them wirelessly communicate
Wireless, battery-powered sensors
FX Supervisory Controller
FX-PCV
FX-ZFR1811
Router A
FC Bus
FX-ZFR1810
Coordinator
FX-WRZ Wireless
Sensor A
FX-PCG
FX-WRZ Wireless
Sensor B1
FX-PCG
FX-ZFR1811
Router B
FX-WRZ Wireless
Sensor B2
FX-PCV
FX-WRZ Wireless
Sensor B3
FX-PCX
FX-WRZ Wireless
Sensor B4
FX-ZFR1811
Router C
Johnson Controls

37. Facility Explorer FX-ZFR Wireless Field Bus System
Wireless Technology
ZigBee® Wireless Mesh
IEEE physical layer
Direct Sequence Spread Spectrum Technology
Reliable communications
Does not interfere with other wireless systems (and vice versa)
Data is undecipherable white noise for non radios (Wi-Fi)
Uses quiet Wi-Fi channels
Transmits using extremely low power levels (10mW)
The Power of Mesh
Redundant network transmission paths
Self-forming and Self-healing
Wireless Personal Area Networks (PANs)
Used for subnetting
Johnson Controls

38. Facility Explorer FX-ZFR Wireless Field Bus System
Architecture Example
FX Supervisory Controller
FX-PCV
FX-ZFR1811
Router A
BACnet MS/TP
FC Bus
FX-ZFR1810
Coordinator
FX-WRZ Wireless
Sensor A
FX-PCG
NS Net
Sensor
FX-WRZ Wireless
Sensor B1
SA Bus
FX-PCG
FX-ZFR1811
Router B
FX-WRZ Wireless
Sensor B2
FX-PCV
NS Net
Sensor
SA Bus
FX-WRZ Wireless
Sensor B3
FX-PCX
FX-WRZ Wireless
Sensor B4
FX-ZFR1811
Router C
Johnson Controls

39. Facility Explorer FX-ZFR1810 Wireless Field Bus System Coordinator
Role in the Wireless Architecture
Provides a wireless interface to wired BACnet MS/TP
Communicates to wireless-enabled FX-PC Controllers (via their Wireless Routers)
Starts the wireless network
Johnson Controls

40. Facility Explorer FX-ZFR1811 Wireless Field Bus System Router
Role in the Wireless Architecture
Plugs into FX-PC Controller
Provides wireless interface between FX-PC Controllers and
FX-ZFR1810 Wireless Coordinator and
FX-WRZ Wireless Sensors
Creates the mesh by routing data (BACnet messages)
Can also be used as a repeater
To fill in transmission gaps
Powered by 15 VDC
From the FX-PC Controller’s FC Bus or SA Bus when acting as a router
From the FX-ZFRRPT accessory when acting as a repeater
FX-ZFRRPT Accessory
Johnson Controls

41. Facility Explorer FX-WRZ Wireless Sensors
Role in the Wireless Architecture
Provides sensed information wirelessly to the wireless-enabled FX-PC Controller (e.g. FX-PCG with a FX-ZFR1811 attached)
“Sleeping” node
Does not route
Transmits every 60 seconds
Extends battery life
Types
Wall-Mountable Room Sensors
Temperature only or temperature & humidity sensing
Onboard controls (setpoint adjustment, LCD, fan speed override button, etc.)
4 to 5 year battery life
uses off-the-shelf AA batteries
Cold Storage Sensor
External temperature probe
-40º C to +35º C operation
Eliminates manual temperature recording in medical applications
Johnson Controls

42. Facility Explorer FX-ZFR Wireless Field Bus System Signal Transmission Details
Wireless Field Bus Transmission Distance
FX-ZFR1800 Coordinator & FX-ZFR1811 Router
FX-WRZ Sensor Mesh Application
Maximum
250 ft. (76.2m)
100 ft. (30m)
Average
50 ft. (15.2m)
Routers can also be used as repeaters to extend transmission distance
Systems can communicate between floors (but 1 coordinator/floor is recommended)
All wireless devices include onboard diagnostics:
FX-ZFR1800 Wireless Coordinator LED displays wireless signal strength, activity, and overall wireless network status
FX-ZFR1811 Router LED displays signal strength and activity
FX-WRZ Wireless Sensors’ LED displays signal strength (or on LCD), activity, and low battery condition
FX-WRZSST Site Survey Tool:
Helps identify potential locations for wireless devices and signal strength between devices.
Johnson Controls

43. One-to-One Wireless Sensing System

44. Facility Explorer One-to-One Wireless Sensing System
Provides Wireless Sensing Only
“One-to-One” relationship between the FX-WRZ Wireless Sensor and the FX-PC controller
Uses similar technology as FX-ZFR Wireless Field Bus System
ZigBee: except it’s not a mesh, but a one-to-one system
Uses same FX-WRZ Wireless Sensors as the FX-ZFR Wireless Field Bus System
FX-WRZ1811 Router can be used as a repeater to extend transmission and fill in gaps
Does not interfere with FZ-ZFR Wireless Field Bus System (uses different PANs)
Main difference: uses FX-WRZ7850 Wireless Receiver to interface the sensor to controller
FX-PCV
SA Bus
FX-WRZ Wireless Sensor
FX-WRZ7850 Receiver
FX-ZFR1811 Router used as a
Repeater
FX-PCG
SA Bus
FX-WRZ Wireless Sensor
FX-WRZ7850 Receiver
Johnson Controls

45. Facility Explorer FX-WRZ7850 Wireless Receiver
Role in the One-to-One Wireless Room Sensing System Architecture
Receive wireless data messages from FX-WRZ Wireless Sensors and communicates that data to the SA bus of the FX-PC Controller
One-to-one relationship
One FX-WRZ7850 Receiver per FX-PC Controller
Up to 5 FX-WRZ Wireless Sensors per Receiver (for averaging, hi/low select)
FX-WRZ Wireless Sensor
FX-WRZ Wireless Sensor
FX-WRZ Wireless Sensor
SA Bus
FX-WRZ Wireless Sensor
FX-WRZ Wireless Sensor
FX-PCV
FX-WRZ7850
Receiver
Johnson Controls

46. One-to-One Wireless Transmission Distance
Facility Explorer One-to-One Wireless Sensing System Transmission Details
One-to-One Wireless Transmission Distance
Maximum
150 ft. (45m)
Average
100 ft. (30m)
FX-ZFR1811 Routers can be used as repeaters to extend transmission distance
All wireless devices include onboard diagnostics
FX-WRZ7850 Receiver has 2 LEDs to display RF signal and SA Bus status
FX-WRZ Wireless Sensor’s LCD (or LED on non-LCD models) displays signal strength, activity, and low battery condition
FX-WRZSST Site Survey Tool:
Helps identify potential locations for wireless devices and signal strength between devices.
Johnson Controls

47. Facility Explorer Wireless Benefits
Wireless Overcomes Many Obstacles/Nuisances Related to Hard Wiring
Certain building types:
Buildings with walls made of brick, concrete, marble, granite, or glass
Buildings with frequent tenant turnover or changes in use
Historic buildings
Certain retrofit project types:
Upgrading buildings with pneumatic controls to digital
Retrofitting an existing DDC system whose existing network wiring is different than what is required by our FC Bus
Network wiring nuisances:
Short detection
Ground loops
Lightening strikes
How much does it cost to move a wired room sensor?
EOL location determination
Locating problematic nodes
Johnson Controls

48. FX-PCT Programming & Commissioning Tool

49. Facility Explorer FX-PCT Programming/Commissioning Tool
Single Tool for All Needed Functions
Programming
Creating the control logic that defines the FX-PC controller’s sequence of operation
Simulating
Verify the control logic operates as expected before downloading
Commissioning
Downloading applications to target FX-PC controllers
Checking out the control logic while it is “live”
Uploading applications
Upgrading firmware
Johnson Controls

50. Facility Explorer FX-PCT Programming/Commissioning Tool
Programming Flexibility
Supports multiple programming methods for all skill levels
Standard System Selection Wizard
Sideloop Wizard
Custom Programming
Johnson Controls

51. Facility Explorer FX-PCT Programming/Commissioning Tool
System Selection Wizard
Provides programmers of all skill levels with a method to quickly engineer a control application
Provides drop-down lists and check boxes for selecting:
Mechanical equipment type (e.g. air handling unit)
Equipment configuration (e.g. mixed air single duct)
Control logic options (e.g. temperature control strategy, economizer suitability strategy, etc.)
Optional sensors, monitoring switches, etc.
Johnson Controls

52. Facility Explorer FX-PCT Programming/Commissioning Tool
Sideloop Wizard
Provides programmers of all skill levels with a method to quickly add additional, custom control logic to the main control application
Check-the-box style programming (similar to System Selection Wizard)
Sideloop Types:
Feedback control
Simple reset (span)
PI loop
Analog to binary control
Binary interlock control
Johnson Controls

53. Facility Explorer FX-PCT Programming/Commissioning Tool
Custom Programming
Provides skilled programmers with the ability to:
Modify applications which were initially created using the System Selection Wizard
Create brand new custom applications
Graphical canvas and table-based programming views
Includes a full set of JCI-designed and -tested control modules and logic blocks
Control Modules
Setpoint calculators
State generators
Output controllers
Logic Blocks
Boolean (AND, OR, NOT, XOR, reliability)
Calculation (EWMA, span, totalization)
Compare (<, >, =, ≠)
Control (PID, PRAC, PMAC, PVDC)
Math (+, -, x, ^, SIN, Abs Value, SQRT)
Psychometric (enthalpy, dew point, free cooling available, wet bulb)
Statistical (average, min, max)
Johnson Controls

54. Facility Explorer FX-PCT Programming/Commissioning Tool
Johnson Controls

55. Facility Explorer FX-PCT Programming/Commissioning Tool
Johnson Controls

56. Facility Explorer FX-PCT Programming/Commissioning Tool
Johnson Controls

57. Facility Explorer FX-PCT Programming/Commissioning Tool
Johnson Controls

58. Facility Explorer FX-PCT Programming/Commissioning Tool
Johnson Controls

59. Facility Explorer FX-PCT Programming/Commissioning Tool
Johnson Controls

60. Facility Explorer FX-PCT Programming/Commissioning Tool
Johnson Controls

61. Facility Explorer FX-PCT Programming/Commissioning Tool
Johnson Controls

62. Facility Explorer FX-PCT Programming/Commissioning Tool
Dual Application View
Application View
Provides a dashboard-style visualization of the application and its components
Categories (organized flowing left to right)
Inputs (onboard, network, miscellaneous)
Setpoint/Miscellaneous
State Generation
Output Control
Outputs (onboard, network, miscellaneous)
Provides a Parameters & Connections window for viewing and editing
Logic View
Provides a 3-paned view of the application and its components
navigation tree showing categories and their modules
a graphical programming canvas showing the all control modules, logic blocks, and connections
palette containing logic blocks available for use in the programming
Johnson Controls

63. Facility Explorer FX-PCT Application View
Johnson Controls

64. Facility Explorer FX-PCT Programming/Commissioning Tool
Simulation
Offline check-out mode used to ensure proper application operation before on-site/online commissioning
Initial settings:
Set the starting values
Set the simulation speed (1-5 times real time)
Time delays on BOs
Actuator stroke times
Capabilities available during Simulation:
Command values
Modify parameters during simulation
View connections and logic
See how the application behaves
Show output “involvement” (what is currently affecting an output)
Johnson Controls

65. Facility Explorer FX-PCT Programming/Commissioning Tool
Online mode used to:
Download application to or upload application from controller(s)
Upgrade controller firmware
View actual data from the connected controller
Make desired changes according to actual control performance
offsets
COVs
polarity
parameters
Perform a VAV box flow test
Johnson Controls

66. Facility Explorer FX-PCT Programming/Commissioning Tool Interfaces
Provide a Connection Between FX-PCT Tool and FX-PC Controllers for:
Uploading/downloading applications
Upgrading controller firmware
Commissioning controllers
Types:
FX-BTCVT Bluetooth Commissioning Converter
Well suited for local access
FX Supervisory Controller (FX20/FX60/FX70) with BACnet Routing enabled
Well suited for remote access
Johnson Controls

67. FX-BTCVT Bluetooth Commissioning Converter
Facility Explorer FX-PCT Programming/Commissioning Tool Interface Types
FX-BTCVT Bluetooth Commissioning Converter
Provides a local, wireless connection between a laptop running FX-PCT Tool and the FX-PC Controllers (via FC Bus or SA bus)
Portable
Uses Bluetooth® wireless technology
FX-PCG
FX-PCX
FX-BTCVT
FX-PCV
Bluetooth Wireless Transmissions
Typical Range: 30 ft.(10m)
Line of Sight Range: 200 ft. (61m)
FX-PCT Tool running on PC with embedded Bluetooth or with external Bluetooth/USB adapter
FX-BTCVT
Johnson Controls

68. FX Supervisory Controller (FX20/FX60/FX70) with BACnet Routing Enabled
Facility Explorer FX-PCT Programming/Commissioning Tool Interface Types
FX Supervisory Controller (FX20/FX60/FX70) with BACnet Routing Enabled
Provides a remote, hardwire connection between laptop running FX-PCT and FC Bus
Routes BACnet/IP (Ethernet) to BACnet MS/TP
Ethernet LAN or VPN (BACnet/IP)
FX Supervisory Controller with BACnet routing enabled
FC Bus
(BACnet MS/TP)
FX-PCT Tool
FX-PCV
FX-PCG
Johnson Controls

69. FX-PC Integration Into FX Supervisory Controller

70. Facility Explorer FX Supervisory Controller Integration
Via BACnet MS/TP
FC Bus is BACnet MS/TP
As is the wired-side of FX-ZFR1810 Wireless Coordinator
FX Workbench’s Assisted Import Wizard
Keys off of the *.caf file exported from the FX-PCT Programming & Commissioning Tool
Automates:
Creating proxy points
Creating graphics
Adding point extensions
FX Supervisory Controller
FX-PCV
FX-ZFR1811
Router A
FC Bus:
BACnet MS/TP
FX-ZFR1810
Coordinator
FX-WRZ Wireless
Sensor A
FX-PCG
NS Net
Sensor
FX-WRZ Wireless
Sensor B1
SA Bus
FX-PCG
FX-ZFR1811
Router B
FX-WRZ Wireless
Sensor B2
FX-PCV
NS Net
Sensor
SA Bus
FX-WRZ Wireless
Sensor B3
FX-PCX
FX-WRZ Wireless
Sensor B4
FX-ZFR1811
Router C
Johnson Controls