1. Sketchbook assignment-part3
Submission: LAST DATES
Pages 2-11 Submission on , Wednesday.

2. Parts of the door Door Types Door Hardware Door Operation
Rough opening is the wall opening into which a doorframe is fitted.
Head is the uppermost member of a doorframe.
Jamb refers to either of the two side members of a doorframe.
Stop is the projecting part of a doorframe against which a door closes.
Casing is the trim that finishes the joint between a doorframe and its rough opening.
Threshold is the sill of a doorway, covering the joint between two flooring materials or providing weather protection at an exterior door.
Saddle is a raised piece of flooring between the jambs of a doorway, to which a door fits closely so as to prevent its binding when opened.
Door Types
Hollow metal doors, Wood doors etc.
Door Hardware
Hinges, Lock sets, closers etc.
Door Operation
Hinges, Lock sets, closers etc.

4. Hollow metal doors
Masonry Wall Steel Stud wall

5. Wood rail & stile doors Top rail Stile
The stile from which the door is hung is called the hinge stile;
the other stile that receives the lockset is called the lock stile.
Flat plywood or raised wood panels; or glass lights or louvers.
Lock rail meets the shutting stile at the level of the lockset.
Bottom rail

6. Wood rail & stile doors Rabbeted doorframe.
Interior frames may have applied stops.
Cased openings may be used without doors and therefore have blank jambs with no stops.
Casing trim finishes the joint between a doorframe and its rough opening.

7. Metal sliding door

8. Overhead door Track positions Motor 180-400mm headroom Lintel
Door opening
Track

9. Coiling door
Motor
mm headroom
Lintel
Door opening
Track

11. Window operation