Presentation is loading. Please wait.

Presentation is loading. Please wait.

ELECTROMECHANICAL L.L.C

Similar presentations


Presentation on theme: "ELECTROMECHANICAL L.L.C"— Presentation transcript:

1 ELECTROMECHANICAL L.L.C
COMPANY PROFILE ELECTROMECHANICAL L.L.C

2 INTRODUCTION Power Spray Electro Mechanical LLC. is an ISO QSM certified Electro-mechanical contracting and pre-qualified for practicing Electrical Works under Category First issued by Abu Dhabi Distribution Company based in Abu Dhabi with more than 10 years of handling turnkey Projects in U.A.E. Power Spray Electro Mechanical LLC. is able to offer complete Value Engineering solution tailored to the region. Power Spray Electro Mechanical LLC. have completed Electro-mechanical works from medium to large scale projects spanning the industrial, commercial and residential sectors. As one of the specialist of Electro-mechanical contracting in the U.A.E. PSEM continue to maintain its leadership within the industry through its commitment to customer satisfaction. The company believe is that customer satisfaction can only be achieved through understanding the Client’s needs and expectations, providing cost-effective, efficient solutions while maintaining the highest quality levels of quality services and product. Our highly qualified and technically competent managers, engineers and technicians, allow us to capture a sizable share of the market. We are currently executing a number of projects in different premises of commercial, residential and industrial type. Power Spray Electromechanical LLC strives to deliver the highest standards of MEP installation, carefully paying attention to our client’s ideas, collaborating in the development of the right scope of work. We develop a unique approach towards each client and each project is a never ending responsibility for us. Our commitment, as well as the commitment of our partners and clients, has contributed to the impressive accomplishments of the company. In a relatively short span of time, we completed a great number of projects and we continue to work on even more upcoming projects that vary in complexity, size and value. And regardless of the size, we commit all we have to every project we work on. It is all about our clients! We undertake all kinds of Mechanical, Electrical and Plumbing works for the following premises: Villas / Hotel Apartments / Warehouses / Factories / Hospitals / Residential Buildings / Commercial Buildings & Offices / Labour Accommodation / Shopping Malls & Centres. Passing and approvals from ADDC for permanent electricity meter Annual Maintenance Contracts – ELECTRICAL, MECHANICAL & PLUMBING

3 OUR VALUES Our Our core values represent the fundamental tenets that guide us in our day-to-day business activities. We expect all Power Spray Electro Mechanical LLC employees to embrace these values and to conduct their business in the true spirit of these values. PEOPLE Employees are our most valued asset. We strive to be honest and open in our communications, demonstrating both empathy and integrity. We support professional development for all employees. We are committed to create a work environment of trust and respect, as well as one that allows all employees to achieve a balance between work and outside interests. COMMUNICATION Power Spray is committed to open and honest communications among all employees, creating an environment in which ideas is fostered and can be shared. We, at all levels in the organization, have the responsibility to communicate corporate goals and to listen and carefully assess input. ACCOUNTABIILTY We believe that consistent achievement of Power Spray’s goals requires individual and team accountability at all levels of the Company. Ensuring a clear explanation and communication of objectives and expected results will facilitate day-to-day decision-making by individuals and teams and will contribute to the successful achievement of results, quality and timeliness. INTEGRITY At Power Spray, we insist on applying the highest ethical standards and adherence to Company values. All employees have the responsibility to conduct their business relationships, both internal and external, with the highest level of professionalism and integrity. QUALITY We strive to achieve high quality in all of our business endeavors. Our systems and procedures are designed to high standards of quality and are expected to meet the most rigorous inspections. We will provide our customers with services of the highest quality. RESPECT At Power Spray, we expect all of our employees to treat their associates with respect and professionalism. We appreciate diversity and value the importance of professionally responding to the ideas, opinions and approaches of our colleagues.

4 OUR VISION OUR MISSION SYNOPSIS
Our knowledge and experience in the commercial and industrial field allows us to serve you with quality installations and job performance, making the project flow smoothly from submittals to final inspection. We made it in the business for over seven years by being committed. Our commitment to you, our customer, is to remain progressive in the industry and offer you the most innovative and quality materials that the market has to offer. We remain committed and focus on employee training for safety and new products. OUR MISSION To dependably offer reasonable, top class security solution to our clients while considering the value prospect of our investor and workforces. SYNOPSIS Power Spray Electro Mechanical LLC Engineering & running agenda are being performed all the way by the following procedures. Planning & Design Analysis Proposed Quotation Project Management Site Activities Manpower & Protection Testing, Commissioning and Handling Over

5 PLANNING & DESIGN ANALYSIS:
Our engineers are fully qualified in all respects. The MEP section employs an accuracy and speed for planning & design analysis. We present a technical innovation at the site and gather all the engineers and technicians regularly in order to asses and update the most recent methods. PROPOSED QUOTATION: The concept of this phase is not permanent due to the abrupt alteration of the materials to be use. The Clients / Contractors send us the proposal drawings and we immediately analyzed to ensure a quick response for project costing approval and furthermore proceed to construction. PROJECT MANAGEMENT: Power Sprays’ site engineers & technicians are well trained. The procedure for planning & design and appropriate electrical and mechanical installations are adhered to and closely supervised in order to meet the on time completion of the project. SITE ACTIVITIES: Safety Log Book: We maintain at our site a safety log book is under the care and custody of our site engineer. This log allows employees and visitors to report as safety violations or safety in general record. The log book is divided into the following sections; Name of Employees Position – Contact Number Time in & Time Out Comments on condition Signature Site Engineer closing remarks

6 MANPOWER & PROTECTION:
Working Hours: Our standard working office hours is 8 (eight) hours a day from o’clock in the morning up to 1.00 o’clock in the afternoon and from o’clock to 5.00 o’clock in the evening, through Saturday to Wednesday and on Thursday from 8.00 O’clock in the morning to 2.00 O’clock in the Afternoon. Working overtime is prescribed if necessary.  Quarterly Supervisory Meetings: At this stage it is held by all operating entities in order to follow up the job site supervisors as well as office staff and see to it the development and the continuous working cooperatively. This meeting is an informative &conductive for discussion .Supervisors from different section and projects site presents the ongoing jobs that have been carried out in a good manner and at same time reporting if there are some problem encountered. Safety Principle & Procedure: A safe work environment will be provided by elimination of hazards. Each employee has a personal responsibility to prevent injury to self or to others and damage to property becomes as individual employees concern. Supervisors will conduct frequent inspection of their respective work area with the intent being to discover and hazardous or unsafe or correct such conditions. MANPOWER & PROTECTION: power Spray have a legal and contractual responsibility to ensure that each place at which our employees work is safe and that it remain safe as long as employees works there. Likewise each supervisor is responsible for ensuring that every man working under his/her direction or control has a safe working place. Safe area is a very important part of our operation should be a safe working place and to attain this objective, all safety principle and procedure is strictly implemented. Power Spray has full capacity to operate and maintain as absolute service to keep it running, hassle free and hit the highest point of effectiveness. Furthermore we are more capable to continue the operation and maintenance to meet up the satisfaction of our clients.

7 TESTING, COMMISSIONING & HANDING OVER:
During services installation various test (static testing) will be undertaken by us. This testing is normally undertaken to prove the quality and workmanship of the installation. Such work is undertaken before a Certificate is issued to “enliven” (i.e. to make live services whether mechanically or electrically. Commissioning Upon completion of static testing, Commissioning will be undertaken. Commissioning process is entitled for a systematic process of ensuring , verifying and documenting that a building facilities and systems performs in accordance with the design intent, contract documents, and the owner’s operational needs. It is the quality assurance process that is performed to increase the performance and likelihood that a newly constructed building and its systems meet the clients/owners expectations and needs. Handing Over Handover action may be accomplished between control agencies/ Consultant of separate services when conducting joint operations or between control agencies within a single command and control system. Handover action is complete when the receiving control acknowledges assumption of control authorities.

8 OUR LICENSES &CERTIFICATES

9

10

11

12

13

14

15 OUR SERVICES

16 Mechanical Electrical &Plumbing

17 MECHANICAL SERVICES HVAC PLUMBING FIRE FIGHTING Ventilation Systems
Ecology Unit Installation System Chemical Flushing &3 rd part Testing GI &PI Ducting Installation System Chiller System District Cooling System Package units , DX Units and Fan Coil Unit Installation Systems Chilled water Piping System HVAC Drainage System Sanitation System Rain Water LPG/NG Systems Hot & Cold Water Supply Systems Water Filtration System Irrigation System Swimming Pool PLUMBING Fire Fighting Sprinkler Installation Fire Suppression System FM 200 System Foam System Clean Agent system FIRE FIGHTING

18 Earthing &Lightning Protection System
ELECTRICAL SERVICES Standby Generator Prime Generator Main Distribution Board Essential Distribution Board Sub –Main Distribution Boards Final Distribution Boards Motor Control Center AMF panel Automatic Transfer Switch Capacitor Banks Feeder Pillar,General Control &Synchronization Panel LV Panels Generator Bus Way System Tap Off Unit and Accessories Dynamic UPS Static UPS Invertors & Convertors Bus bar system UPS System Switches Isolators Conduits Trucking Plugs Socket outlets Flex Outlets Ceiling rose Crossed Linked Polyethylene Cable XLPE(MV & LV ) Polyvinyl chloride cable –PVC (MV &LV Steel wired armored Cable ( Power Cables Wiring Accessories Internal Lights External Lights Façade Lights Aircraft warning Lights Park Lights Street Lights Flood Lights Light Fixtures Rolling Sphere Method Protective angle method Mesh method Earthing &Lightning Protection System

19 HVAC SYSTEM Our HVAC division provides customize and innovative solutions in the field of Air-conditioning. We undertake HVAC works encompassing supply, installation, testing and commissioning for residential, commercial and industrial projects. A team of qualified and experienced engineers supported by design team provides optimum solutions to customers for all their air-conditioning requirements and energy consumption savings in varying ambient conditions. Our staff is highly trained offering the best quality and high standard workmanship in producing the required designs, performing the installation works & maintenance works of HVAC systems and refrigeration systems as specified & required. Our scope of works includes small domestic HVAC systems to complex industrial systems including Chillers (air cooled and water cooled), VRV/VRF, Package Units, Split Units Ducted & Non Ducted, Decorative & Cassette type Split ACs, Air Handling Units, Pumps, Extract Fans, Heat Exchangers, Fan Coil Units, Computer Room Air Conditioning Units, Heat Recovery Units, automated BMS and PLC control systems. All of our systems are designed, installed, tested and commissioned in accordance with the most vigorous of international industry standards.

20 PLUMBING SYSTEM As rapid urbanization increases, so is the demand for potable water and sewerage services. PSEM has the infrastructure, experience and expertise to install the required pipelines, pumping stations and complete sewerage networks. We undertake installation of potable water, irrigation, sewerage and drainage networks. Services include the installation, pipe laying, testing and commissioning of complete networks in commercial, industrial and domestic buildings.

21 FIRE FIGHTING Firefighting is the act of extinguishing fires. A firefighter suppresses and extinguishes fires to protect lives and to prevent the destruction of property and of the environment.  Firefighters may provide other valuable services to their communities, including emergency medical services. One of the major hazards associated with firefighting operations could possibly be the toxic environment created by combustible materials, the four major risks are smoke, oxygen deficiency, elevated temperatures, and poisonous atmospheres. Additional hazards include falls and structural collapse that can exacerbate the problems entailed in a toxic environment. To combat some of these risks, firefighters carry self-contained breathing equipment. The first step in a firefighting operation is reconnaissance to search for the origin of the fire, to identify the specific risks, and to locate possible casualties. Fires can be extinguished by water, fuel removal, or chemical flame inhibition

22 LV PANELS Power Distribution is a system, consisting of a Main Distribution Board (MDB), Sub Main Distribution Boards (SMDBs) and Final Distribution Boards(FDB), by which the electrical energy is transmitted via branches to reach the exact end user. MDB An MDB is a panel or enclosure that houses the fuses, circuit breakers and ground leakage protection units where the electrical energy, which is used to distribute electrical power to numerous individual circuits or consumer points, is taken in from the transformer or an upstream panel. An MDB typically has a single or multiple incoming power sources and includes main circuit breakers and residual current or earth leakage protection devices. A MDB is comprised of a free standing enclosure, a bus bar system, MCCB's, metering and support equipments and required current transformers. Panels are assembled in a systematic manner such as incomer section and outgoing section and maximum current rated up to 6000A SMDB which is feed by MDB which is installed generally at the point where a large distribution cable terminates and several smaller sub-circuits start. These are the switchboards that although similar construction, are larger than a final distribution board circuit. The boards are installed midway through the power distribution system, at the point in a large distribution cable ends, and several smaller starting sub-circuits .maximum current rated up to 1250A FDB  Final Distribution Board is feed by a Sub-Main Distribution Boards ,which then feeds electrical energy to the end user with Current rating up to 250A.

23 GENERATOR Electric power generators can be classified in one of three ways depending on their mode of operation standby , continuous, prime generators Standby generator :Standby power rated generators are the most commonly rated generator sets. Their primary application is to supply emergency power for a limited duration during a power outage. With standby rated generators there is no overload capability built into the units. Standby power rating should be applied to the unit where public utility power is available. The typical rating for a standby engine should be sized for a maximum of 80% average load factor and roughly 200 hours per year. Continuous Power Rating generator :Continuous power rating is used in applications where supplying power is at a constant 100% load for an unlimited number of hours each year. Continuous power rated units are most widely used in applications where the power grid is unreachable. Such applications include mining, agriculture or military operations. Prime power rated generators :Prime Power rated generators are used in applications where the power grid unavailable. Prime power applications fall under two distinct categories Indefinite Running Time and Limited Running Time .

24 LIGHT FIXTURES We provides wide variety of light fixtures such as Internal lights ,external lights, Air craft warning lights ,Street lights ,Flood lights ,Park Lights Etc depends on the client requirements . Internal lights includes LED lights (Recessed, Surface mounted, LED step lights, LED Tape Lights), Display lights, Rope lights, Cove Lighting, Fluorescent lights ,decorative lights & Emergency Lights Etc. External Lights includes Wall mounted lights, under water lights for swimming pool, Decorative suspended wall mounted light, Linear LED wall washer & Pendant lights Etc.

25 EARTHING AND LIGHTNING PROTECTION SYSTEM
Structural Lightning Protection System is installed to minimize the risk of damages to the External & Internal parts of the structures including the electrical and electronic equipments from a Lightning strike and reducing the risk of injury to humans by safety discharging the high voltage to the earth system. To calculate the area of protection the rolling sphere technique can be employed. The zone of protection determined by the methods requires protection through the Roof mesh method and protective angle methods. The products used for LPS are Bare copper tape, Bare Al Tape, Solid circular conductor, Bare stranded copper conductor, PVC insulated stranded Cu conductor, Strike Pads, Square Tape clamps, Bi- Metallic connectors, Test clamps, Air terminal fixings, Air Terminals, Earth rods, Earth rods clamps, Earth rod couplings, Earth Bars etc.

26 MAJOR PROJECTS COMPLETED

27 ENI Shams Tower Al Reem Island Abu Dhabi U.A.E

28 Residential Building at Plot C74, C75 & C76 Rawdhath Abu Dhabi
Residential & Commercial Building for Mr.Nasser Al Junabie

29 Residential Building at Reem Isalnd, Plot-S06 C04 Mangrove Residence
Rawdhat Residential Building Project in Abu Dhabi, Sector E48, Plot No. C70 & C78 Residential Building at Reem Isalnd, Plot-S06 C04 Mangrove Residence

30 5 Storey Building at Mussaffah Shabiya Al Bahaya Villa
Ware House Mussaffah, Abu Dhabi U.A.E Al Shurooq Gulf Steel & Cement

31 Power Spray Electromechanical LLC. Current & Completed Projects
SL. No. Project Name Client Scope of Work Role in Project 1 Rawdhat Residential Building Project in Abu Dhabi, Sector E48, Plot No. C70 & C78 Emirates Land Group LLC. Design Engineering , Supply, Installation , Testing and Commisioning of Mechannical, Electrical & Plumbing Works Sub-Contractor 2 Residential Building at Reem Isalnd, Plot-S06 C04 Mangrove Residence Mr. Qassim Al Sharafi Complete Sub-Contract Work for Design and instalation of Mechanical, Plumbing, Electrical, Fire Fighting & Irrigation Network 3 Residenial Building at Plot C74, C75 & C76 Rawdhath Abu Dhabi Reem Developers Supply, Installation Testing & Commissioning of Complete Electrical works including supply and installation of LV panels, capacitor bank, isolators, complete LV cables, cable Trays, GI trunking, copper strip for machine earthing, ADDC shop drawing preparation, approval submission, inspection, power release & telephone works and etisalat approval. 4 5 Storey Building at Sector No.: ME12, Plot No. C16 Mussaffah Shabiya Mr. Salah Sultan Abdullah Saleh Al Shamsi Complete Electrical Works 5 3 Villas in Secto No. Z-18 & Z-21, Plot No. 113 Mr. Salah Abdul Rahman Al Sharafi Supply, Installation, Testing & Commissioning of MEP Works 6 3 Villas in Secto No. Z-18 & Z-21, Plot No. 15 Mr. Abdul Rab Abdul Rahman Al Sharafi 7 Ware House Sector No. MW-4, Plot No , Mussaffah, Abu Dhabi U.A.E. Emirates Pioneer Trading 8 Al Bahaya Villa Mr. Al Sharafi Supply and Installation of Full MEP Works 9 Office, Warehouse and Mosque Building, Sector No. ICAD-1, Plot No. 37H1, Mussaffah Industrial, Abu Dhabi U.A.E. Union Pipe Industry

32 10 Icon Cement Factory at Sector No. ICAD-1, Plot No. (59, 60) C3 & (68, 69) C4, Mussaffah, Abu Dhabi U.A.E. Icon Cement Company Supply, Installation, Testing of Complete Electrical Works which include industrial automation works like PLC panels, main low voltage switchboard, MDB, SMDB's final DB's Capacitor Bank all cabling works between MDB up to final DB's tray works, small power and industrial lighting works, control system wiring, earthing & lighting protection system. Sub-Contractor 11 Development Works for Irrigation Network Reservoirs and Pumping Station - Contract 485 Municipality of Abu Dhabi City - Park & Recreation Facilities Division (PRFD) Supply, Installation, Testing & Commissioning of Electrical & Instrumental Works 12 B+G+2P+R ENI Shams Tower Al Reem Island Abu Dhabi U.A.E. Emirates National Investment Co. LLC. Supply and Installation of Complete containment for Electrical and ELV System. Supply and Installation of Lighting and power switch necessary wires and Accessories. 13 ABC Private School at Plot No. P8, Zone: Shamkha City Abu Dhabi ADEC Supply,Installation,Testing&Commissioning of Electrical works includes wiring,final DB fixing,SMDB fixing and MDB fixing.Cable lying,glanding,termination from Transformer to MDB and MDB to all DBs,tray and trunking works.Also ,includes ADDC shop drawing preparation ,approval, inspection and power release. 14 Villa at Al Faqaa Al Ain U.A.E. Mr. Abdulhameed Mohammed Saeed Supply, Installation, Testing and Commissioning of MEP Works

33 15 Construction of Laboratory Building & Ancillary Facilities Al Hoty Stanger Laboratoies Supply, Installation Testing & Commissioning of Complete Electrical works including supply and installation of LV panels, capacitor bank, isolators, complete LV cables, cable Trays, GI trunking, copper strip for machine earthing, ADDC shop drawing preparation, approval submission, inspection, power release & telephone works and etisalat approval. Sub-Contractor 16 ESC Al Sharafi Steel LLC., Sector No. ICAD-1, Plot No. (59, 60) C3 & (68,69) , Mussafah, Abu Dhabi U.A.E Shurooq Gulf Steel & Cement Prepare Shop Drawings for Electrical as per ADDC/RSB regulation, Supply, Installation, Testing of Industriaol Lighting, MDB, SMDB, Final DB, Cable Lying, glading & Termination, Isolator Fixing, Industrial Socket Fixing, Lighting Control System, Earthing & Lighting Protection System. 17 Steel Factory & Building, Sector No. ICAD III, Plot No.: 41NR27, Mussaffah Abu Dhabi U.A.E. Mr. Ibrahim Snhkair (Al Naser Metal Industries) Supply, Installation, Testing & Commissioning of Electrical Works 18 Landscape work for Al Samha Old Cementery & Its West /P9 Municipality of Abu Dhabi City Supply, Installation, testing & Commissioning of Electrical works which include MCC panel installation for the Pump Room, Street Lighting works. Kwh Meter cabinet fixing and wiring cabling works, cable tray work, earthing and lighting protection. ADDC shop drawing preparation approval inspectiion & power release. 19 Commercial Building (G+M+5+RF) Mr. Naser Abdullah Naser Al Junaibi Supply, Installation, Testing & Commissioning of MEP Works 20 Private Villa at Sector No. MFW-28, Plot No. 53, Khalifa City Abu Dhabi Mr. Hussien Lateef Ahmed Al Hammadi

34 21 Data Centre for All in One Technology at Sector No. ME1, Plot No. C246 All in One Technology Installation of Cable Trays, Replacing old MDB and installation of 2500A MDB reglanding of 1cx630mm2 XLPE/AWA Cables, installation of SMDB, ATS panel, UPS SMDB's, Metering works cabling between MDB & SMDB Final DB's floor boxes, installation of small power and lighting. 22 District Cooling Plant 1 Design-Building and Operatin and Maintenance Abu Dhabi Air Ports Company PJSC Electrical Works (Approval, LV Installation, Supervision, Inspection and Power Release from ADDC) 23 Three Villas at Sector No.E-48, Plot No.328, Abu Dhabi U.A.E. Mrs. Ayisha Hamad Rashed Supply, Installation, Testing & Commissioning of Complete electrical Works including Supply and Installation of LV Panels, Capacitor Bank, Isolators, Complete LV Cables, Cable trays, GI Trunking, Light Fixtures Earthing.ADDC shop drawing preparation,approval,Inspection and Power Release. Telephone works & Etisalat approval. 24 Expansion of Al Shurooq Gulf Steel & Cement Industry at Sector No.ICAD-1, Plot No.(59,60)C3 & (68,69)C4, Musaffah, Abu Dhabi, UAE Shurooq Gulf Steel & Cements Office Expansion Project-Supply, Installation, Testing & Commissioning of SMDB's and final DB's pulling & Cable glanding from SMDB to FDB's Cable terminaiton and all earthing System. ADDC drawing approval inspection & Supply release. Telephone works & etisalat approval. 25 Two Typical Villas, Majlis & Services Bock at Sector No.Z/26, Plot No.05 Mrs. Mona Mohamed Soltan Al Rayamy Supply, Installation, Testing & Commissioning of Complete electrical Works including Supply and Installation of LV Panels, Capacitor Bank, Isolators, Complete LV Cables, Cable trays, GI Trunking, Light Fixtures, Earthing.ADDC shop drawing preparation,approval,Inspection and Power Release. Telephone works & Etisalat approval.

35 26 Al Sharafi Babich Steel Expansion WorksSector No.ICAD-1, Plot No. (59,60)C3 & (68,69)C4, Musaffah, Abu Dhabi, UAE Shurooq Gulf Steel & Cements Factory Expansion Project- Supply, Installation, Testing & Commissioning of Complete Electrical System. Electrical Works including Supply and Installation of LV Panels, Capacitor Bank, Isolators, Complete LV Cables, Cable trays, GI Trunking, Light Fixtures Copper Strip for Machine Earthing. Sub-Contractor 27 Culvert at Dubai Marina EMAAR This under ground tunnel project includes GI conduit works for the tunnel lighting and power points for 13 A IP67 sockets and sump pump, industrial extract fan. Supply and installation for GRP final DB for light and power. 28 Two Typical Villas, Sector No. Z/7, Plot No. 81 Mr. Ahmed Saleh Jumaan Mohamed Al Sayari Supply, Installation, Testing & Commissioning of Complete electrical Works. 29 Replacement of (ATS) Panel and Generator Set Control Panel - Musanada General Directorate of Residence and Foreign Affair Abu Dhabi Replacement of ATS and Generator Set Control Panel 30 Two Villas at Sector No. Al Samha, Plot No. 167 Mr. Qahis Ali Qahis Al Yami 31 MP 14 Sewerage Pumping Station in Khalifa City B Abu Dhabi Sewerage Services Company Electrical works for ADDC snag correction which includes final DB replacement, copper strip earthing for machines, meter cabinet fixing & wiring etc; ADDC reinspection and power release

36 32 Private Villa at Sector No. Z/17, Plot No. 81 Mr. Ali Saleh Jumaan Mohammed Al Syari Supply, Installation, Testing & Commissioning of Complete electrical Works including Supply and Installation of LV Panels, Capacitor Bank, Isolators, Cable trays, GI Trunking, Light Fixtures, Earthing. ADDC shop drawing, preparation,Inspection and Power Release. Telephone works & Etisalat approval. Sub-Contractor 33 Villa in Plot No. 83, Shamkha 12/z, Abu Dhabi UAE Mr. Mohammed Ali Salim Al Hamadi Supply, Installation, Testing & Commissioning of Complete electrical Works including Supply and Installation of LV Panels, Capacitor Bank, Isolators, Complete LV Cables, Cable trays, GI Trunking, Light Fixtures Earthing.ADDC Shop Drawing Preparation, approval inpection & power release, telephone works and etisalat approval. 34 Private Villa at Sector No. Z17, Plot No. 83 Mr. Ahmed Saleh Jumaan Mohamed Al Sayari Supply, Installation, Testing & Commissioning of Complete electrical Works including Supply and Installation of LV Panels, Capacitor Bank, Isolators, Cable trays, GI Trunking, Light Fixtures Earthing.ADDC shop drawing preparation, approval, Inspection and Power Release. Telephone works and Etisalat approval. 35 Villa at Sector No. Z-21, Plot No. 128, MBZ City, Abu Dhabi U.A.E. Mr. Abdulla Abdul Azia Al Shamry Prepare shop drawings for Electrical,Water,Drainage and Etisalat based on RSB/ADDC/Etisalat/ADSSC standards co - ordinate with its inspection, connection and supply activation. 36 Villa at Sector No. Z-2, Plot No. 64, MBZ City, Abu Dhabi U.A.E. Mrs. Maha Mohammed Al Malki

37 37 Ware House at Plot No. 105, Mussaffah West Abu Dhabi U.A.E. Mrs. Noora Butti Prepare shop drawings for Electrical,Water,Drainage and Etisalat based on RSB/ADDC/Etisalat/ADSSC standards co - ordinate with its inspection, connection and supply activation. Sub-Contractor 38 H.E. Ibrahim Al Hadidy Building in Plot No. W/5-2, Air Port Road Abu Dhabi U.A.E H.E. Ibrahim Al Hadidy Complete Electrical Refurhisbment Work for the Building ( G+7) which includes reworking of the unhealthy circuits in all the final DB's. Fixing of new light fixures inside the apartment.

38 OUR BRANDS

39 ELECTROMECHANICAL L.L.C
Tel No.: Fax No.: P.O. Box 29276, Abu Dhabi U.A.E. Al Masraf Bank Building, 9th Floor, Suite No. 902 Website:


Download ppt "ELECTROMECHANICAL L.L.C"

Similar presentations


Ads by Google