1. 1) Schematic diagram of part of a house wiring system
12. Power Distribution Systems
1) Schematic diagram of part of a house wiring system

2. 2) What we should know about electric parameters in our house?
The voltage, potential difference, is ~120 V.
The current is not direct, but alternating; it changes the polarity 60 times per second, so the frequency is 60 Hz.
All the connections are made in parallel with the electric cable shown below.
Electric cable

3. 3) The colors of the electrical connections
Electric outlet
Simple electric switch
Black (hot) wire must be connected to the brass screw
White (ground) wire must be connected to the silver screw
Bare (ground safety) wire must be connected to the green screw

4. 13. Alternating current
AC current
DC current I0 I t
-I0 t T

5. 14. RC circuits I
1) Charging capacitor R C

6. 2) Discharging capacitor
Example: The relaxation time of the RC circuit is 10 s. The initial current is 10 mA.
What current will be after 10 s?

7. Example: A 2.0-μF capacitor is charged to 12 V and then discharged through a
6.0 MΩ resistor.
a) What is the relaxation time?
b) What fraction of the initial charge the capacitor has after 20 s?
c) What is the current at after 20 s?
d) What is the potential difference across the capacitor after 20 s?

8. Example: The capacitor in the circuit is charged when the switch is at A. It is left at A for long time. Then, it is moved to B and the capacitor is discharged. What is the time constant  for this process? R  C B A
= RC
= 2RC
 = RC/2 C R
reshape
The formula  = RC is for a capacitor and a resistor in series.
Req = R/2

9. 3) RC circuits (details of calculations)
a) Discharging capacitor
One can repeat the same calculations for the potential differences and current.
b) Changing capacitor (charge and potential difference)
One can repeat the same calculations for the potential differences.
Note! Current behaves the same way for charging and discharging processes.