Presentation is loading. Please wait.

Presentation is loading. Please wait.

Marston Bentley Div. Simon McManus

Similar presentations


Presentation on theme: "Marston Bentley Div. Simon McManus"— Presentation transcript:

1 Marston Bentley Div. Simon McManus
Wm Canning Ltd Marston Bentley Div. Simon McManus

2 Offshore Fluids Production Control Fluids Exploration Control Fluids
Motion Compensator Fluids Drilling Mud Additives Antifoams

3 Wm. Canning B.S.I. Registered to ISO 9001 for manufacture, delivery and research. Facilities include the QC lab, R&D lab, Fluids test lab and Hydraulic test lab.

4 Wm Canning Ltd Manufacturing sites in Wigan, England and Houston Texas. Storage in Aberdeen, Great Yarmouth, Bergen, Stavanger, Port Elizabeth S. Africa, Rio De Janeiro, Singapore and Perth Australia.

5 Exploration Products BOP control fluid concentrates.
Motion Compensator Hydraulic Fluids Drilling Mud Additives

6 History of BOP fluids Closed systems used hydraulic oil.
Open systems started to use soluble mineral oil Fully synthetic soluble polymers are more stable more environmentally acceptable and non flammable

7 Erifon HD 856 100:1 BOP Fluid Concentrate.
Workhorse of the industry for over 15 years Used by all major drilling contractors and equipment suppliers Excellent track record Market leader world-wide

8 Erifon HD603 Has all the properties in Erifon HD856
Developed to meet current and future environmental regulations Has been tested by major valve manufacturers and approved for use in their systems.

9 BOP Fluid Maintenance Correct Dilution is of up-most importance.
Dilution test kits will be provided Correct dilution prevents poor lubrication corrosion potential microbiological attack Wm Canning give a free fluid monitoring service.

10 Erifon Systems Cleaner
Total kill is essential (use 2% for 48hrs) Will remove oil and grease where bacteria grow Foaming the fluid will help get to inaccessible places. Protective clothing must be worn Can Not be discharged.

11 Environmental Testing
Full HOCNF information available in line with PARCOM on all Erifon products. Erifon hd603 is the least toxic bop fluid known. SFT and the DTI through the OCNS allows discharge of all the oceanic fluids.

12 Leak Detection Soluble oils give a white plume when discharged into the ocean. Such as Oceanic LTF (Leak Tracer Fluid) More acceptable is the use of fluorescent dye. This can be detected by an Ultra-Violet (UV) lamp on an ROV.

13 Erifon Pilot Line Fluid
Developed to prevent poor water and mixing damaging the pilot line system Ready to use Increases reliability

14 Erifon 818 Motion Compensator Fluid. Market leader for over 15 years
First water-based fluid to replace old phosphate ester fluids excellent track record

15 Vapour Phase Corrosion Testing
Carbon steel plates placed over the fluid at 60°C for 1 hour

16 Vapour Phase Corrosion Testing
FLUID WITH NO VPI ERIFON 818

17 Compression Ignition of Compensator fluids
HSE recommended test carried out by Bundesantalt Fur Materialprufung Germany. Erifon 818/Compenol was the first fluid tested and was approved by the International Association of Drilling Contractors in 1986

18 Compression Ignition of Compensator fluids
Sample injection High pressure air Heating coils

19 Compression Ignition of Compensator fluids
Silicone Oil and Phosphate Ester fluids ignited at the above temperatures after less than 1 second exposure. Erifon 818/Compenol did not ignite even after 180 seconds

20 Erifon 818L Low viscosity version of Standard Erifon 818
Developed in conjunction with a major motion compensator manufacturer. For use in cold climates

21 Erifon 818TLP Added high pressure lubrication for Tension Leg Platforms Required due to higher loads and different types of motion Developed in conjunction with a major motion compensator manufacturer

22 Erifon Topside HFC Water-based hydraulic oil
Designed to replace standard ISO 46 hydraulic oil For use in cranes and pipe moving equipment. Negates the need for bunding as full HOCNF information is available.

23 General Rules For Water-based Fluids
Do not use oil based greases, use glycol based greases such as Oceanic ACL or Silicone grease. Keep the bulk fluid temperature below 60°C Do not use water absorbent seals or filters.

24 Drilling Mud Additives
Lo-Tork Products used all over the world. Lo-Tork Envirolube for ecological sensitive areas. Wm Canning are leading the R&D for silicate muds and wireline lubrication.


Download ppt "Marston Bentley Div. Simon McManus"

Similar presentations


Ads by Google