1. Servo Drive Energy-Saving Injection Molding Machine
时间:2012年04月09日
MA/G Presentation
Servo Drive Energy-Saving Injection Molding Machine

2. MA/G—Models Inheritance and development
●MA/G based on classical characteristics and technical precipitation from the past years
●MA/G meets the market demand
●Models: MA860/G～MA10000/G
（No fixed pump and variable pump ）

3. MA/G—Models
MA860/260G， MA1200/370G, MA1600/540G, MA2000/770G, MA2500/1000G, MA3000/1800G, MA3600/2250G, MA4500/2900G, MA5300/4000G, MA6500/4550G, MA7800/6350G, MA10000/7950G

4. MA/G Presentation—Injection Unit Rigidity
MA、PL、FX
The MA/G series' injection unit base adopts the structure of a fully supported slide type base, so the rigidity of the injection unit is stronger. The appearance is more sturdy and the injection is more stable.
MA/G

5. MA/G Presentation—Platen Structure
Fixed platen
The fixed platen structure of MA860/G-MA2500/G is the same as MA II, which not only reduces the deformation of the platen and breaking of the tie bars, but also guarantee the accuracy of the molded products.

6. MA/G Presentation—Platen Structure
H-shaped
The patented H-shaped, dish type fixed platens is adopted in our medium range machines.
Because of the casting and processing technology, it greatly reducing the internal stresses and the platen rigidity increased to more than 3%.

7. MA/G Presentation—Platen Force Analysis
Deformation graph
Stress graph
Using Finite Element Analysis (FEA) design software to optimize the structure of the platen, with a very significant effect. After optimization, deformation is reduced by 10%, the stress decreased by 14%,

8. MA/G Presentation—Platen Force Analysis
Step type movable platen
V type end platen
Independent research and development of the platens rigidity increased by more than 5%. The benefit of this optimizes the mold close curve and improve the stability of the whole clamping unit.

9. MA/G Presentation—Machine Body Rigidity
MA860/G～MA2500/G Machine body structure
Overall frame structure more rigid
Welding process is thorough,
making the body more rigid.
Electrical panels added to outside of machine frame

10. MA/G Presentation—Machine Detail
Compact design
Appearance is neat and clean
Ergonomically designed
Exquisite detail

11. Built-in oil cooler(86-250T )
MA/G Presentation—Hydraulic Optimization
Simple hydraulic layout(MA860/G-MA2500/G)
Built-in oil cooler(86-250T )

12. MA/G Presentation—Controller
TECHMATION AK668
● User friendly HMI (12 inch display)
● Durable push buttons > presses
●USB2.0 Interface
●High performance CPU

13. Thank You
For your attention