1. F. Ronchetti, INFN-LNF, September 20 2017
Infrastructure
Main building compressor 27 kW: ongoing
Backup compressed air line for the CMM: installation ongoing
Extra pump for redundancy and improved tooling vacuum: pump arrived, installation this week, checked yesterday
HS and Stave cooling circuit: orders ongoing, checked today …
Electrical, vacuum and networks services for HIC cutting table: done
Tooling
HS soldering table: done
Stave/power bus soldering table: arriving from Torino
Legs for soldering table: being ordered (monopixel)
FPC-FPC bridge holders and FPC metallized bridges : arriving from Torino
HB qualification: ongoing, some discrepancy found
Tower1: qualification and shimming ongoing
Tower2: news screws needed for smoother electric contact HIC landing
Power Boards: 2 available
HIC, HS, Stave readout adapters: arrived
Stave assembly jig rails and carriages: order placed (finally!)
Functional HIC for readout tests: available
HIC mosaic board: back from Bari
HMP 4040 and 2030 power supplies: fast order placed
Special crates for Stave and HIC/HS: sent from CERN
Eccobond glue: arrived at CERN (Marco will bring it to LNF)
Next:
Ongoing this week: production of 1 HS with FPC-padchips dummies: alignment, gluing, soldering. Next week SF alignment (without glue). Start functional HIC readout setup and test.
mechanical stave realistic FPC dummies being sent: 5 from Strasbourg.
Aim to be ready to assemble-test Stave-0 at the beginning of October
Production shifts from mid October.
F. Ronchetti, INFN-LNF, September

2. HS Assembly with FPC-padchips Dummies

3. HS Assembly with FPC-padchips Dummies