1. Task 5.2 INERTIA Simulation Test Suite TECNALIA Joseba Jimeno

2. Task 5.2 Index Task Overview Test system architecture Work plan
Deliverable D5.2.1/2

3. T5.2 -Task Overview Objective: Duration: Partners involved:
“This task is aimed to define a complete Test Suite for the different components, modules and prototypes developed in the project, going further than the individual tests performed during and after the implementation and focusing on their integration” [DoW]
Duration:
Start: July 2013 (M10)
End: March 2015 (M30)
Partners involved:
TECNALIA (3 pm), PPC (2 pm), ENELSI (1 pm)
Deliverables:
D5.2.1/D5.2.2 “INERTIA Simulation Test Suite” (M24)(M30)

4. T5.2 – Test system architecture
Simulation test system

5. T5.2 – Work Plan Input required from each module development task:
Specifications
Detailed test suite
Definition of the simulated system (M20):
DSO Control Hub with simulated network and scenarios
Aggregator Control Hubs (1 aggregator)
Local Control Hubs (CERTH + TECNALIA)
Definition of test scenarios (M20):
Network operation scenarios based on T4.2
Aggregator operator related scenarios
Local Hub related scenarios

6. T5.2 – Work Plan
Development of test suite for each of the scenarios considering the simulation test system (M32). For each test in the test suite:
Elements (SW & HW) participating in the test
Preconditions
Step by step instructions to execute the test
Expected results for each step

7. T5.2 – Work plan Expected contribution from partners:
TECNALIA: Definition of the simulated system, scenarios and test suite development
PPC: Definition of network operation related scenarios
ETC EI: ???

8. T5.2 – Deliverable D5.2.1/2 Two deliverables:
D5.2.1 (M24)
D5.2.2 (M30)
Description of the test components and set up
Data sets to be used on the tests (MV loads and generation
Definition of test scenarios
Test suite

9. Thank you for your attention