1. Solo mission operations
Sylvain Lodiot SOWG 10, ESAC 12/07/2017

2. Instrument state model status Instrument procedure status MIB database
Outline
MOC Status
Open points from SOWG 9
Instrument state model status
Instrument procedure status
MIB database
Instrument commissioning
EDDS/GFTS

3. MOC Status MCS D3 (final) October 2017 MPS D3 (final) April 2017
Migration to ops lan Feb 2018 (L-12m)
Simulator D2 (closed loop) July 2017
Simulator D3 (final) December 2017
SVT0 (PFM) /30 August 2017
Other SVTs/IGSTs TBC
SVT1 (PFM) Feb-May 2018
L-12m - L-9m
FOP issue Dec 17 (SVT 1 -2m)

4. Open Points from SOWG 9
Commanding Guidelines: TCs with Group repeaters
All issues have been addressed
PDOR tool
The Bepi PDOR tool will not be made available for Solo
Instrument teams need to be able to provide PDORs directly to MOC
This IF (PI -> MOC) will be tested with every single PI

5. Instrument procedure inputs (from SOWG 9)
At SOWG 9, MOC and SOC insisted big time on the need for inputs from the instrument teams
Progress has nevertheless been very slow
New approach initiated by MOC
Define instrument state models satisfying MOC and SOC needs
This is needed for MOC MPS (power, mode transitions)
This allows to derive which (routine/planning) procedures are needed
Next slides report status of:
State models
Routine/planning procedure inputs
Engineering/contingency procedures

6. Instrument state model status
MOC eng
Instrument
Status
JLP
EUI
No news since 23/06/17, HV to be added?
STIX
Pending confirmation of final model from 28/06
HV to be added? MP
SPICE
Done, HV included
pending power figures, due date was 16/06
EPD
Done, pending HV DL
SWA
SOLO-HI
New proposal sent 01/06/17, no news since ME
PHI
New model to come; no news
MAG
Done SL
METIS
No news since 20/06/17, HV to be added?
RPW
Need to converge on state model ASAP

7. Instrument nominal/planning procedure status
MOC eng
Instrument
Comments
JLP
EUI
Need to converge on state model/work on procs ASAP
STIX
Procedure inputs expected 28/06, no news MP
SPICE
Procedure inputs expected by end July
EPD
Work on MP now; may run in SVT0 DL
SWA
Only example procedures provided, no complete set
SOLO-HI
Work on DL now; may run in SVT0 ME
PHI
MAG
Procedure inputs expected end June, no news SL
METIS
Some input provided months ago; mapping to new state model pending; significant work still
RPW
Some input provided last week. Link to state model missing; further work required

8. Instrument engineering/CRP status
MOC eng
Instrument
Status
JLP
EUI
STIX MP
SPICE
EPD DL
SWA
SOLO-HI ME
PHI
MAG SL
METIS
RPW

9. MIB database (1) ADS format is SIS/SRDB
MOC can provide instrument specific SIS extracts if required
All MOC tools work in MIB format (MIB ICD 6.9)
SIS is converted to MIB format (MIB ICD 6.2)
MOC then performs MIB fine tuning as needed
Differences between ICD 6.2 and 6.9 known and minor
Will be handled by fine tuning if needed
MIB ASCII files are sent to SOC
This will be via GFTS when available
SOC passes on the ASCII files to the instrument teams

10. MIB database (2)
Latest database provided on 28/06/2017 is derived from MAS 4.45

11. Commissioning
MOC work will start towards the end of 2017 (JLP coordinating)
Target is to have an advanced timeline in FOP issue 1
Work will start from the inputs already available to MOC
Teams will be contacted individually

12. EDDS/GFTS Both systems will be installed around L-12m MOC GFTS
Files will be pushed/pulled by MOC from various in and out-trays
MOC EDDS; MOC will need:
IP addresses (as seen from outside your firewall, if any)
SFTP username used to deliver EDDS responses
Contact information (full name, phone, , company name)