1. From: Interactive Feature Modeling for Reverse Engineering
Date of download: 12/26/2017
Copyright © ASME. All rights reserved.
From: Interactive Feature Modeling for Reverse Engineering
J. Comput. Inf. Sci. Eng. 2006;6(4): doi: /
Figure Legend:
Growing algorithm

2. From: Interactive Feature Modeling for Reverse Engineering
Date of download: 12/26/2017
Copyright © ASME. All rights reserved.
From: Interactive Feature Modeling for Reverse Engineering
J. Comput. Inf. Sci. Eng. 2006;6(4): doi: /
Figure Legend:
Wire-frame of surface and data points extracted from point cloud

3. From: Interactive Feature Modeling for Reverse Engineering
Date of download: 12/26/2017
Copyright © ASME. All rights reserved.
From: Interactive Feature Modeling for Reverse Engineering
J. Comput. Inf. Sci. Eng. 2006;6(4): doi: /
Figure Legend:
Scan results with detected edges (left) and swept surfaces (right)

4. From: Interactive Feature Modeling for Reverse Engineering
Date of download: 12/26/2017
Copyright © ASME. All rights reserved.
From: Interactive Feature Modeling for Reverse Engineering
J. Comput. Inf. Sci. Eng. 2006;6(4): doi: /
Figure Legend:
Reverse engineered CAD model of computer front panel

5. From: Interactive Feature Modeling for Reverse Engineering
Date of download: 12/26/2017
Copyright © ASME. All rights reserved.
From: Interactive Feature Modeling for Reverse Engineering
J. Comput. Inf. Sci. Eng. 2006;6(4): doi: /
Figure Legend:
Surface with no draft angle constraint (right) and 0deg draft angle (left)