1. Controller Rework

2. STEP 2. Remove screws STEP 1. Remove cover from controller
Carefully remove cover from controller as to not damage locking tabs.
Remove cover
STEP 2. Remove screws
Use a screw drivers to remove the first four screws from unit.
Remove screws
Bergstrom, Inc. Confidential

3. STEP 4. unsolder connector
STEP 3. Remove screws
Use a screw drivers to remove the remaining first four screws from unit.
Remove screws
STEP 4. unsolder connector
Unsolder connector that is mounted to the board.
Unsolder pins
Remove connector
Bergstrom, Inc. Confidential

4. STEP 6. Assemble back cover
STEP 5. solder wires
Solder 8inches of 20 AWG wires onto board.
STEP 6. Assemble back cover
Route wires through back cover and assembler with screws.
STEP 7. Assemble connector
Assemble wire into connectors securely.
Bergstrom, Inc. Confidential

5. STEP 8. Final Assembly Bergstrom, Inc. Confidential
Assemble unit together for desired outcome.
Bergstrom, Inc. Confidential