Presentation is loading. Please wait.

Presentation is loading. Please wait.

Sphere Option for Helical spring CF16 Bellows Adjustment bolts (horizontal plane) CF38.

Published byNora Owens Modified over 5 years ago

Similar presentations

Presentation on theme: "Sphere Option for Helical spring CF16 Bellows Adjustment bolts (horizontal plane) CF38."— Presentation transcript:

1

2

3 Sphere Option for Helical spring CF16 Bellows Adjustment bolts (horizontal plane) CF38

4 Compressed air cylinder 200N force at 6 bar stroke 12mm
Vacuum side Outside air side

5 Vertical adjustment (fine)
Kinematic mount Horizontal adjustment (fine) Bellows Compressed air connection with 3mm tube

6 Slot Hole Flat Bellows Connection to vacuum-vessel flange

7 1300mm 1300mm 15mm Vertical and Horizontal adjustment Hard stops (4x) Horizontal LVDT voice coil (4x) Vessel mount Vessel mount

8 Table 180kg 145mm thick Holes for balance masses

9 Movable mass1.6 kg Wire feed holes

10

11 Vertical LVDT Voice coil (4x)

12

13

Download ppt "Sphere Option for Helical spring CF16 Bellows Adjustment bolts (horizontal plane) CF38."

Similar presentations

Suspension Systems - 1 Topics covered in this presentation:

Suspension Systems - 1 Topics covered in this presentation:
Ms 4.20 pneumatic cylinders/Tieh SF1 Pneumatic Cylinders.

Ms 4.20 pneumatic cylinders/Tieh SF1 Pneumatic Cylinders.
Static Equilibrium KEY

Static Equilibrium KEY
Test Chamber Assembly, 1.5M Long (59.00”) Vacuum Tube, 4.00 OD x 3.50 ID Vacuum Tube, 3.75 OD x 3.51 ID 3.375” CFF, Non-Rotatable Feedthrough, Ceramtec.

Test Chamber Assembly, 1.5M Long (59.00”) Vacuum Tube, 4.00 OD x 3.50 ID Vacuum Tube, 3.75 OD x 3.51 ID 3.375” CFF, Non-Rotatable Feedthrough, Ceramtec.
Vacuum Vessel Production Readiness Review

Vacuum Vessel Production Readiness Review
A 10-m long steel wire (cross – section 1cm 2. Young's modulus 2 x 10 11 N/m 2 ) is subjected to a load of 25.000 N. How much will the wire stretch under.

A 10-m long steel wire (cross – section 1cm 2. Young's modulus 2 x N/m 2 ) is subjected to a load of N. How much will the wire stretch under.
Module Vessel Connection Concept Steve Virostek Lawrence Berkeley National Laboratory AFC Module Meeting April 23, 2004.

Module Vessel Connection Concept Steve Virostek Lawrence Berkeley National Laboratory AFC Module Meeting April 23, 2004.
MICE Collaboration meeting at LBNL: 9 ~13 th Feb, 2005 Force reaction analysis Stephanie Yang Feb 10 th, 2005.

MICE Collaboration meeting at LBNL: 9 ~13 th Feb, 2005 Force reaction analysis Stephanie Yang Feb 10 th, 2005.
Module Connection and Support Arrangement Steve Virostek Lawrence Berkeley National Laboratory AFC Module Meeting May 21, 2004.

Module Connection and Support Arrangement Steve Virostek Lawrence Berkeley National Laboratory AFC Module Meeting May 21, 2004.
Tagger and Vacuum Chamber Assembly Procedure. Preassembly of second bottom yokes and poleshoes. a) Install special support. b) Place the second bottom.

Tagger and Vacuum Chamber Assembly Procedure. Preassembly of second bottom yokes and poleshoes. a) Install special support. b) Place the second bottom.
Progress on the MICE 201 MHz Cavity Design Steve Virostek Lawrence Berkeley National Lab RF Working Group Fermilab August 22, 2007  automatic.

Progress on the MICE 201 MHz Cavity Design Steve Virostek Lawrence Berkeley National Lab RF Working Group Fermilab August 22, 2007  automatic.
LIGO-G020486-00-W Commissioning Data on Vibration Isolation & Suspensions Fred Raab 24 October 02.

LIGO-G W Commissioning Data on Vibration Isolation & Suspensions Fred Raab 24 October 02.
LIGO-G030236-01-M Advanced LIGO1 Mass Limits & Balancing Dennis Coyne Advanced LIGO, Seismic Isolation System (SEI) Structural Design & Fabrication Bidder’s.

LIGO-G M Advanced LIGO1 Mass Limits & Balancing Dennis Coyne Advanced LIGO, Seismic Isolation System (SEI) Structural Design & Fabrication Bidder’s.
August 8, 2007 Flange Options for the Antineutrino Detectors Kirk McDonald Princeton University (August 8, 2007)

August 8, 2007 Flange Options for the Antineutrino Detectors Kirk McDonald Princeton University (August 8, 2007)
A block is launched up a frictionless 40° slope with an initial speed v and reaches a maximum vertical height h. The same block is launched up a frictionless.

A block is launched up a frictionless 40° slope with an initial speed v and reaches a maximum vertical height h. The same block is launched up a frictionless.
Mounting arrangement for the Solid Absorber. This contains mounting arrangement for:- 1. Handling and lifting from manufacturer’s place to RAL; 2. For.

Mounting arrangement for the Solid Absorber. This contains mounting arrangement for:- 1. Handling and lifting from manufacturer’s place to RAL; 2. For.
Platzhalter Bild Vacuum Transfer System for loading the Sartorius Prototype Mass Comparator CCL1007 Thomas Fehling, NCSLI-Conference, Washington D.C.,

Platzhalter Bild Vacuum Transfer System for loading the Sartorius Prototype Mass Comparator CCL1007 Thomas Fehling, NCSLI-Conference, Washington D.C.,
CRYO PIPING & INTER-MODULE CONNECTIONS Yun He, Daniel Sabol, Joe Conway External Review of MLC Daniel Sabol, MLC External Review 10/3/2012.

CRYO PIPING & INTER-MODULE CONNECTIONS Yun He, Daniel Sabol, Joe Conway External Review of MLC Daniel Sabol, MLC External Review 10/3/2012.
Tagger and Vacuum Chamber Design. Outline. Design considerations. Stresses and deformations. Mechanical assembly.

Tagger and Vacuum Chamber Design. Outline. Design considerations. Stresses and deformations. Mechanical assembly.
Alignment and assembling of the cryomodule Yun He, James Sears, Matthias Liepe MLC external review October 03, 2012.

Alignment and assembling of the cryomodule Yun He, James Sears, Matthias Liepe MLC external review October 03, 2012.

Similar presentations

Ads by Google