1. What’s in your kit?

2. DISCLAIMER & USAGE
The content of this presentation is for informational purposes only and is intended for students attending Louisiana Tech University only.
The authors of this information do not make any claims as to the validity or accuracy of the information or methods presented.
Any procedures demonstrated here are potentially dangerous and could result in damage and injury.
Louisiana Tech University, its officers, employees, agents and volunteers, are not liable or responsible for any injuries, illness, damage or losses which may result from your using the materials or ideas, or from your performing the experiments or procedures depicted in this presentation.
The Living with the Lab logos should remain attached to each slide, and the work should be attributed to Louisiana Tech University.
If you do not agree, then please do not view this content.
boosting application-focused learning through student ownership of learning platforms

3. Please get ready to check the items in your kit!
Your instructor will give you a check-off sheet
Check off items as we talk about them!

4. Find in your kit… Discuss with the people at your table.
Does anyone know what is pictured?
What do you think/know it is used for?
How do you think you will use it for Living with the Lab?

5. Find in your kit… Discuss with the people at your table.
Does anyone know what is pictured?
What do you think/know it is used for?
How do you think you will use it for Living with the Lab?

6. Find in your kit… Discuss with the people at your table.
Does anyone know what is pictured?
What do you think/know it is used for?
How do you think you will use it for Living with the Lab?

7. Find in your kit… Discuss with the people at your table.
Does anyone know what is pictured?
What do you think/know it is used for?
How do you think you will use it for Living with the Lab?

8. Find in your kit… Discuss with the people at your table.
Does anyone know what is pictured?
What do you think/know it is used for?
How do you think you will use it for Living with the Lab?

9. Find in your kit… Discuss with the people at your table.
Does anyone know what is pictured?
What do you think/know it is used for?
How do you think you will use it for Living with the Lab?

10. Find a bag of electrical parts in your kit …
Discuss with the people at your table.
Does anyone know what is pictured?
What do you think/know it is used for?
How do you think you will use it for Living with the Lab?

11. Find in your kit… Discuss with the people at your table.
Does anyone know what is pictured?
What do you think/know it is used for?
How do you think you will use it for Living with the Lab?

12. Find in your kit… Discuss with the people at your table.
Does anyone know what is pictured?
What do you think/know it is used for?
How do you think you will use it for Living with the Lab?

13. Find in your kit… Discuss with the people at your table.
Does anyone know what is pictured?
What do you think/know it is used for?
How do you think you will use it for Living with the Lab?

14. Find in your kit… Discuss with the people at your table.
Does anyone know what is pictured?
What do you think/know it is used for?
How do you think you will use it for Living with the Lab?

15. Kit Overview:

16. What’s in your kit? Canvas Bag Robot Kit Bag dial calipers
wire strippers
precision diagonal cutters
Teflon Tape
multimeter
multimeter leads with pinchers
USB cable
precision Phillips screwdriver
stubby screwdrivers
6” steel ruler
fine-point permanent marker
6 AA batteries
needle nose pliers
pocket knife
safety glasses
2 servos motors
electrical bag
resistors, LEDs, capacitor, fuse, terminals, three-pin headers, photoresistor
400 tie-point breadboard
140-piece jumper wire kit
Arduino Uno
2 wheels with 2 tires
bag with ball caster & parts
6-AA battery holder
2.1mm barrel jack plug
metal robot chassis
6-inch twisted red & black wire
2 whisker switches
3 pieces of shrink wrap
hardware bag
nuts, screws, grommet, zip ties, standoffs, grommet

17. Things you should know:
You may not use everything in your kit this quarter
You will eventually use it all
Keep track of your kit
The cost of the kit is approximately $150
Lost items can be purchased at local/online stores
Tech has 2 “stores” available to you
Vending machines outside BOGH 129 & 130
Small electronic components
Dr. Hall’s office: BOGH 222
Larger components not found in the vending machines