1. Date of download: 11/2/2017
Copyright © ASME. All rights reserved.
From: Progressive Die Sequence Design for Deep Drawing Round Cups Using Finite Element Analysis
J. Manuf. Sci. Eng. 2004;128(1): doi: /
Figure Legend:
A round cup manufactured using progressive dies (Part A)

2. Date of download: 11/2/2017
Copyright © ASME. All rights reserved.
From: Progressive Die Sequence Design for Deep Drawing Round Cups Using Finite Element Analysis
J. Manuf. Sci. Eng. 2004;128(1): doi: /
Figure Legend:
Geometry of part B (blank thickness: 2.15 mm)

3. Date of download: 11/2/2017
Copyright © ASME. All rights reserved.
From: Progressive Die Sequence Design for Deep Drawing Round Cups Using Finite Element Analysis
J. Manuf. Sci. Eng. 2004;128(1): doi: /
Figure Legend:
Variation of the punch diameter and wall thinning in progressive forming stages (example part, A)

4. Date of download: 11/2/2017
Copyright © ASME. All rights reserved.
From: Progressive Die Sequence Design for Deep Drawing Round Cups Using Finite Element Analysis
J. Manuf. Sci. Eng. 2004;128(1): doi: /
Figure Legend:
Flow chart to determine the design parameters of the first forming stage for part B

5. Date of download: 11/2/2017
Copyright © ASME. All rights reserved.
From: Progressive Die Sequence Design for Deep Drawing Round Cups Using Finite Element Analysis
J. Manuf. Sci. Eng. 2004;128(1): doi: /
Figure Legend:
Simulation model

6. Date of download: 11/2/2017
Copyright © ASME. All rights reserved.
From: Progressive Die Sequence Design for Deep Drawing Round Cups Using Finite Element Analysis
J. Manuf. Sci. Eng. 2004;128(1): doi: /
Figure Legend:
Location of maximum thinning at the first stage (determines the upper limit of the punch diameter for the next stage)

7. Date of download: 11/2/2017
Copyright © ASME. All rights reserved.
From: Progressive Die Sequence Design for Deep Drawing Round Cups Using Finite Element Analysis
J. Manuf. Sci. Eng. 2004;128(1): doi: /
Figure Legend:
Shape of deformed part at each stage for progressive die sequence design

8. Date of download: 11/2/2017
Copyright © ASME. All rights reserved.
From: Progressive Die Sequence Design for Deep Drawing Round Cups Using Finite Element Analysis
J. Manuf. Sci. Eng. 2004;128(1): doi: /
Figure Legend:
Comparison of punch diameters predicted by experience based and FEM assisted approaches

9. Date of download: 11/2/2017
Copyright © ASME. All rights reserved.
From: Progressive Die Sequence Design for Deep Drawing Round Cups Using Finite Element Analysis
J. Manuf. Sci. Eng. 2004;128(1): doi: /
Figure Legend:
Thickness distribution in the final part predicted by experienced based and FEM assisted approaches

10. Date of download: 11/2/2017
Copyright © ASME. All rights reserved.
From: Progressive Die Sequence Design for Deep Drawing Round Cups Using Finite Element Analysis
J. Manuf. Sci. Eng. 2004;128(1): doi: /
Figure Legend:
Comparison of punch corner radii predicted by experience based and FEM assisted approaches