1. Technology Education Lab Safety

2. Basic safety for daily life Basic shop safety
Purpose Of Lesson
Basic safety for daily life
Basic shop safety
How to locate and follow safety information on tools and equipment.

3. WE WILL DISCUSS Proper Shop Behavior Proper Dress
Personal Protective Equipment (PPE)
Fire Safety
Blood Bourne Pathogens
Safety Signage (TERMS)
Safety Colors
Basic Tools
Material Safety Data Sheets (MSDS)

4. Your Safety and the Safety of others is at Stake!!!
WALK – Never run
Never clown around
Be considerate of others
Stay in your assigned area

6. Always Practice Correct Safety Procedures
Dress Correctly
Report any unsafe conditions to instructor IMMEDIATELY
Never use Equipment your not trained to use

7. If your not using the tool LEAVE IT ALONE
Get permission to use any tool or equipment
Only one student at a time use a tool
Don’t throw it away!!

8. Do not rely on the protective gear to keep you safe
Only use a tool for its specific purpose

9. Do not use power tools unless your instructor is present
At the End of Each Hour
Stay on a Dry Floor
Do not use power tools unless your instructor is present

10. At the End of Each Hour
Tools must be in place and lab cleaned after each class…..

11. Fire Safety You can use a fire extinguisher to stop a small fire
Using the wrong type of fire extinguisher could KILL YOU!!!!

12. There are Many Types of Fire
Class A Ordinary Combustibles
Class B Flammable Liquids
Class C Flammable Gases
Class D Flammable Metals
Class Electrical
Class F Flammable Liquid (grease/oil)

13. There are Many Types of Fire Extinguishers
Water
Dry Chemical
CO2
Halon Gas -

14. Fire Extinguisher Chart

15. Nearly All in Schools Are Dry Powder (ABC) – Why is that?

16. Using a Fire Extinguisher

17. Blood born Pathogens AIDS, Hepatitis, and dozens of others
Do Not Touch
Do Not Handle

18. How to Handle Blood Use Gloves Dispose of in proper way
If serious – Fill out accident report

19. Safety Colors
RED – Fire
GREEN – Safety
BLUE – Out of Order

20. Safety Stripes
Yellow – Hazard or object in the way that cannot be moved
Yellow and Black – Show areas where operators only are allowed

21. Hot Glue Gun Do not touch the tip Use only the correct size glue stick
Do not put anything except glue in the gun

22. Wait until glue is completely melted before using
Glue can burn you through thin materials

23. Craft Knives Craft knives Must Be Carried With Cap On Them
Pushed Away Body
Always Use Cutting Board

24. MSDS Material Safety Data Sheets
Contain safety information on chemicals
Contains Emergency Directions
Safety Data Sheet (SDS)
Product Safety Data Sheet (PSDS)

25. Hazard Alert Messages
Danger
Warning
Caution
Important
Notice

26. Hazard Alert Messages
Danger = COULD KILL YOU! POTENTIALLY DEADLY, AND ETC…
Warning = COULD CAUSE YOU SERIOUS INJURY, ETC…
Caution = COULD HURT YOU, DAMAGE YOUR PROJECT, &/OR THE DAMAGE THE MACHINE
Important = YOU COULD BREAK THE MACHINE &/OR MESS UP YOUR PROJECT
Notice = YOUR PROJECT WILL MESS UP, NOT COME OUT RIGHT

27. International Safety Symbols
Danger, Warning, or Caution
Cutting Hazard
Eye Protection Required