1. Hotspot KPI Guideline
YL.Y

2. Baseline (Post-Hotspot) (<50m from given location)
Hotspot Location
KPI
Hotspot
Baseline (Post-Hotspot)
(<50m from given location)
Celcom
Maxis
DiGi
U-Mobile 1
SBE_09_UMSCHANSELLORY2 A
Download average throughput(25M)
95% of bins in a cluster meeting the throughput as per design
41.2(99%)
24.05(57.67%)
35(98.76%)
GSM A
Upload average throughput (250K)
23.04(100%)
3.73(100%) A
CSFB call setup success rates
>=99%
100.00% A
CSFB Call setup time
95% of samples <=5 sec
7.62(0.00%)
5.98(0.00%)
6.33(0%) A
Reselection time back to LTE (after CSFB)
95% <=5 sec
1.00(100.00%)
1.1(100.00%)
1.2(100.00%) A
VoLTE Call setup success rate
100% NA A
MOS (Open mode)
>3.5 and better than competitor A
VoLTE Call drop A
Circuit switch drop call due to RF A
Circuit switch block call due to RF A
Zero Buffering on YouTube
98% or better than competitor whichever higher. Mobility and static test A
Minimum of 3 /5/7Mbps Download Speeds as per design target Changed to 25Mbps perform at Speedtest.net/Celcom
>=99% of samples meeting the cell edge as per design
45.14
29.96
25.35 A
Popular Web Pages loaded in 3s for file less than 1Mbyte
98% or better than competitor whichever higher. Mobility and static test
1.0(100%)
2.8(80.00%)
3.2(80.00%) A
Popular Web Pages loaded in 5s for file more than 1Mbyte and less than 3MByte
4.2(100%)
11.25(25.00%)
3.4(100.00%) A
Latency
<=20ms
17ms
78ms
81ms

3. Baseline (Post-Hotspot) (<50m from given location)
DL/UL:
Hotspot #
Hotspot Location
KPI
Hotspot
Baseline (Post-Hotspot)
(<50m from given location)
Celcom
Maxis
DiGi
U-Mobile 1
SBE_09_UMSCHANSELLORY2 A
Download average throughput(25M)
95% of bins in a cluster meeting the throughput as per design
41.2(99%)
24.05(57.67%)
35(98.76%)
GSM A
Upload average throughput (250K)
23.04(100%)
3.73(100%)
The target(25M) is from the simulation plot in Mapinfo. In Mapinfo layer, the Long. and LAT. of the hotspot are needed to confirm the hotspot location. Then the design value will be obtained exactly.

4. Hammer Project KV020 S-KPI CBO
YOUTUBE:
Hotspot #
Hotspot Location
KPI
Hotspot
Baseline (Post-Hotspot)
(<50m from given location)
Celcom
Maxis
DiGi
U-Mobile 1
SBE_09_UMSCHANSELLORY2 A
Zero Buffering on YouTube
98% or better than competitor whichever higher. Mobility and static test
100.00%
GSM
Import the .aex to NEMO, and then : Other——buffering
Ten events
If there is a buffering, a signal will be emerged in one event.
And the Success Rate=(all events-buffering events )/all events
© Ericsson AB 2016

5. WEB1: Import the .aex to NEMO,
SBE_09_UMSCHANSELLORY2 A
Popular Web Pages loaded in 3s for file less than 1Mbyte
98% or better than competitor whichever higher. Mobility and static test
1.0(100%)
2.8(80.00%)
3.2(80.00%)
GSM A
Popular Web Pages loaded in 5s for file more than 1Mbyte and less than 3MByte
4.2(100%)
11.25(25.00%)
3.4(100.00%)
Import the .aex to NEMO,
then : Other——HotSpot HTTP——Export to .exe——Filter the best web page(least average time and largest percentage, other operator follow the web of Celcom)

6. Speedtest/Latency: Choose the maximum of the ten logs1
SBE_09_UMSCHANSELLORY2 A
Minimum of 3 /5/7Mbps Download Speeds as per design target Changed to 25Mbps perform at Speedtest.net/Celcom
>=99% of samples meeting the cell edge as per design
45.14
29.96
25.35
GSM A
Latency
<=20ms
17ms
78ms
81ms
Choose the maximum of the ten logs

7. Hammer Project KV020 S-KPI CBO
© Ericsson AB 2016