2. Serial Interface on 195E products Configure Ethernet links first Troubleshooting and diagnostic of WLAN network Serial Data Transferred Over Ethernet SystemSerial Links are Transparent Point to Point Multicast Two Modes of Operation

3. 12 VDC Input (Auxiliary Connector ) Reset Switch RS-232 Configuration RJ-45 10/100BaseT Ethernet Port Transmit LED Receive LED Status LED Power over Ethernet LED Aux Power LED RS-232 Data Port Second Ethernet Port

4. 12 VDC Input Reset Switch USB Configuration RJ-45 10/100/1GB Ethernet Port Transmit LED Receive LED Status LED RS-232 Data Port Power LED RSSI LED Meter

5. Data Rate, Parity, Start/Stop Bits Transmission Characters Data Format Single Page Configuration on Setup All remote sites will receive the data Set to multicast address Default Route must be set to the IP address of Root Bridge Multipoint SystemSeparate Networks with Port Number

6. Hybrid of Both Serial and Ethernet Interface Legacy systems Adding in new locations to existing site Providing video link on serial network Both Serial and Ethernet Network Can Work Simultaneously Serial Network has Little Impact on Bandwidth