1. Multifunctional Sensor
SB-CMS-12in1

2. Functions SB-CMS-12in1 PIR motion sensor Ultrasonic sensor LUX sensor
Temperature sensor
2 Dry contacts
2 external condition inputs
IR(infrared) receiver
IR(infrared) transmitter
2ch 5A Relay outputs
Constant LUX control
security alarm logic (works with Security Module)
24 configurable logics
SB-CMS-12in1

3. Basic information Subnet ID and Device ID Device remark
LED on/off option

4. IR Transmitter 1.Input a range to be involved
2.Select codes and upload it to 12IN1,it would show in the left table
3.Test the code in 12IN1

5. IR Receiver Enabe /Disable IR code receiver
These 8 keys match with the 8 keys of HDL remote HDL-MTIRW(Select LCD panel,the 5 pages correspond to this 5 pages)

6. IR Reveiver
Select control mode
Save

7. IR Reveiver
Set the target for each key

8. Sensor Setting Right click to refresh the status displaying
you can enable/disable these functions here, you also can send the UV switch ON/OFF commond to enable/disable these functions
Constant LUX function(pay attention to remark)

9. Sensor Setting Power off recover options
Right click to refresh the status displaying
Power off recover options

10. Logic Relation
Select Logic relation
Combine Logic input condition

11. Logic Relation Logic True delay time
trigger targets when the logic is true.
Logic False delay time
trigger taegets when the logic is false.

12. Security Function Enable the security function of ch1
Assign ch1 to the security module(10/12), area1

13. Relay Settings Built-in 2 channel 5A Relay
Cycle Mode:Relay turns on and off periodically

14. Simulate Test Simulate some sensors' value or status.
This is very useful when test the new-created Logic.

15. Application Requirements:
1. When people open the door and come into the meeting room, turn on the lights automatically
2. 1 minute after people come into the room, turn on the AC and set the temperature as 25℃
3. 1 minute after people left the room, turn off the lights and set temperature as 27 ℃
4. 3 minutes after people left the room, turn off the AC automatically
5/2/2018

16. Application
When people open the door and come into the meeting room, turn on the lights automatically

17. Application Delay time=1m Select "Movement"
Suppose dry contact 1 has been connet with a magnetic contact and used to detect the door status.
Select "AND"
Save

18. Application
Turn on the light when the Logic is true

19. Application
B. 1 minute after people come into the room, turn on the AC and set the temperature as 25℃

20. Application Delay time=1m Select "Movement"
Select "Connect"--Close the door
Select "AND"
Save

21. Application
Check the index no. in SB-DN-EM,the third one is colling 25
Fill in the index no. here

22. Application
C. 1 minute after people left the room, turn off the lights and set temperature as 27 ℃
5/2/2018

23. Application
Delay time=1m
Select "No Movement"
Save

24. Application
Turn off the light and set the temperature as 27 ℃

25. Application
D. After 3 minutes people left the room, turn off the AC automatically
5/2/2018

26. Application
Delay time=3m
Select "No Movement"
Save

27. Application
Fill in the index no., Index no.=2