1. ENVIRONMENTAL PROTECTION External EHS Expert Panel Workshop

2. Background Legal Background MOST IMPORTANT EU Directives EU Guidelines
EU Standards
CZ Legislation
CZ Standards
MOST IMPORTANT
Good relationships with neighbors
Good customer and regulator relationships

3. Environmental TIME SCHEDULE
EIA (Environmental impact assessment)
Permissions and statements obtaining
Review of building and technology design
Building
Testing
Building trial operation
Preparation and obtaining of operational permissions
Installation
Preparation of Environmental management documents

4. Environmental management
Environmental managerial documents as a part of EHS Management system
Full time employee
Legal requirements

5. Main areas of the environmental protection
Environmental protection areas
Description
Waste management
Waste management work-flow, rules and responsibilities setting
Air pollution control
Emissions measuring,
Water pollution control
Monitoring of emissions to the water
Emergency preparedness
Occurrence assessment of an emergency situation and its prevention
Explosive and toxic gases handling
Identification of explosive and toxic gases (amount, storage equipment, placement, training)
Dangerous chemicals handling
Identification of dangerous chemicals (amount, storage equipment, placement, training)
Dangerous goods transportation
Possibility of Dangerous goods transportation (chemicals, wastes, radioactive material and biohazard material) Identification
Resources consumption
Natural Gas, Water, electric energy consumption monitoring

6. Diesel power station
Backup source CAT 35168
For safe shutdown of the experimental technologies
5000l (approx gallons) of diesel- 12 hours of operation

7. Waste water treatment
Connection with municipal drainage
No need to have waste water treatment plant
Oil separator for parking area

8. Cooling of rooms and experimental technologies
Water is treated with bactericides (concentration is low).
In case of discharging it will not cause threat to municipal waste water treatment plant.

9. Water treatement for cooling, heating and cleaning
Boiling room
Removal of water hardness
Cooling Plant room
DEMI water plant
For DEMI water cooling loop
For USC
For laboratories

10. DEMI water
DEMI water cooling loop
For cooling of experimental technologies
Loop volume 17 m3
Minimization of possible water activation
USC
For cleaning of experimental equipment
Middle size unit
Laboratories
Small size units

11. USC - Ultrasonic cleaning
What will be cleaned ?
Optical and mechanical parts of different shapes.
Material of cleaned parts
- AISI 303, AISI 304, AISI 304L, AISI 316L, AISI 316
- EN AW 6082
Max. size of cleaned parts
Flat components approx. 1×1,6x0,3m (3x5x1ft)
Cubic or spheric components approx. 1,2×0,8×1m (4x2,5x3ft) or Ø 0,6–0,8m (2-2,5ft)
Max. weight of cleaned parts  - approx. 500kg (1100lb)

12. USC - Ultrasonic cleaning
Room layout …

13. Ozone depleting gases – FLUORINATED HYDROCARBONS
AquaEdge Chiller units Carrier
for HVAC cooling
containing refrigerant type R-134a
EU regulated
certificated installation
certificated service
periodic tightness tests

14. Waste management
CURRENTLY
we do not produce dangerous waste, but we have a system in place
amount of produced waste is „small“
FUTURE
amount and type of waste will increase and will be depending on the research activities and the associated maintenance.

15. RA Waste Management
The amount and type of radioactive waste that ELI will be probably generated will be various depending on the research activities and the associated cleaning and maintenance of experimental areas.
Almost all of this radioactive waste will be category of low-level radioactive waste.
Activated materials
Filters
Dumps and local shielding
Experimental chamber and equipment within
Contamination (debris from targets)
Handling activated materials = Transport, Temporary storage, Final disposal

16. QUESTIONS What type of environmental risk assessment do you use?
What is an approach for environmental planning in your facility?
What are the possible environmental issues associated with start-up of new facility?
How do you manage a waste flow in your facility?

17. THANK YOU