1. Using the classroom DVD Player
Overview
Use this documentation is used to show how to use the DVD players that are located in classrooms.
Learning
Objective
Independently learn how to DVD players that are located in new learning areas.
Prerequisites
Knowledge of: how to operate a remote controller, how to operate a stand alone DVD player
Access to: classroom with permanently installed DVD player
Primary
Audience
Lake Forest Country Day School Faculty and Staff
Author
Mara Grujanac, Technology Curriculum Coordinator
Keith Gillette, Director of Information Technology
Lake Forest Country Day School
Instructions
Arrows change slides. Print button prints all slides to default printer. Quit exits.

2. Using the classroom DVD Player
Turn on Epson projector remote control by sliding slider switch to right of red Power button toward front of remote
Point remote at projector & push the red Power button
The projector will beep
The status light on the projector will flash green
The projector will display auto-setup on the screen
Push the Video source button on projector remote
Push the power button on the DVD player
Press Open/Close
Place DVD in tray & press Open/Close
Press Play or use Samsung remote to control DVD
Adjust ceiling speaker volume with Anchor remote

3. The End!
Still have a question? Contact the IT Service Center for further assistance:
Call: x168, x169, x170
Document Control
Version
Date Complete
Author
Description
Date Approved
Approved By
0.01
Grujanac, Mara
Initial Draft
N/A
1.0
Gillette, Keith
Made it better