1. European Robotic LABoratory
EURLAB
European
Robotic
LABoratory
HOW TO MEASuRE distances

2. From time to time, in order to design a 3D Part , you need to define distances :
lenght an width from a plate for example.
This little content explains how to measure.
1- Open an assembly design in which you want to insert a new part.
2- To create this 3D Part, at first, you need to know the width of the part.
3- The width of the part is equal to the distance between the lateral plates
4- To measure this distance, follow the explanation of the video
1-How to create a meaSURE BetwEen…
New 3D Part to insert
New 3D Part which is created
Lateral plates
Width ?

3. In order to design notches on the 3D male Part, you need to know the distance of the
notches in the 3D female Part
1- Open an assembly design in which you want to insert a new part with notches.
2- To create male notches in this 3D Part, at first, you need to know the lenght of the female notches.
To measure this distance, follow the explanation of the video
2-How to create a meaSURE item from…
New 3D Part to insert
New 3D Part with male notches which is created
Lenght ?
Female notch
3-How to create several measures
Watch the vidéo beside to understand how to create several measures