1. Electricity: current, Voltage, Resistance and circuits
Click on button for story on backyard Tesla coil (YouTube)
Nikola Tesla dreamed of creating a way to supply power to the world without stringing wires across the globe. The inventor came close to accomplishing this when his "mad scientist" experiments with electricity led to his creation of the Tesla coil.
The first system that could wirelessly transmit electricity, the Tesla coil was a truly revolutionary invention. 

2. Learning Targets: I can demonstrate how electrons flow in a circuit.
I can demonstrate the ability to read and construct schematic diagrams
I can explain the advantages and disadvantages of alternating vs. direct current
I can explain how voltage and resistance influence current flow in a circuit
I understand the importance of the different components in a circuit
I know the units used to measure current, voltage and resistance

3. Types of Electricity
Static electricity forms when charges remain on an object for a while.
Current electricity forms when electrons flow through a circuit

4. What is Current Electricity?
The flow of negatively charged particles called electrons in a complete circuit. - +

5. Electric current (I) – flow of charge
Amount of charge passing through a set point every second
Higher the current, the faster the electrons move
Unit of measure = amperes (A) or milliamps (mA);
1.0 A = 1000 mA
1 A = 1coulomb/1 second (1 Coulomb is 6.24× electrons)
Measured with a device called an Ammeter
Analogy: How fast the water in a river flows is like current flow in an electrical cable

6. Electric Circuit: A complete pathway that allows electrons to flow from the source and back again.
The person represents an electron in a circuit
Stairs are the battery – the source of potential energy (number of stairs is the voltage)
Potential energy lost only when person slides down – like when electrical energy transformed to other forms of energy by a load i.e. light bulb uses electricity to produce light and heat
At bottom electron/person has zero potential energy remaining

7. CIRCUIT COMPONENTS: Four basic parts!
A source such as a battery or solar panel that provides the electrical energy to push electrons through a circuit. The amount of push determines a cells voltage.
Conductor: Wires provide a pathway for the electrons to flow
Load: a device that transforms electrical energy into other forms of energy i.e. motor, light bulb, heater, buzzer
Switch: a device that can stop the flow of electrons by closing or opening a circuit

8. Electron Flow in a circuit
Electrons flow from –ve to +ve terminals if the circuit is “closed”
Circuits can be arranged two ways:
Series: current has only one pathway through all parts of the circuit.
Cells are connected from positive to negative terminals
Parallel: Multiple pathways in the circuit
The cells are connected so that positive terminials meet positive terminals and negative terminals meet negative terminials e

9. Current and Voltage
Circuit Creation Activity Current and Voltage - Video

10. schematic Diagrams

11. Circuit Diagram Examples

12. Circuit Diagram Examples
On your own: Draw the schematic diagram
With your partner: Agree on the correct diagram
Circuit Diagram Examples

13. Circuit Diagram Examples
On your own: Draw the schematic diagram
With your partner: Agree on the correct diagram
Circuit Diagram Examples

14. Circuit Diagram Examples
On your own: Draw the schematic diagram
With your partner: Agree on the correct diagram
Circuit Diagram Examples

15. DRAWING CIRCUIT DIAGRAMS
COMPLETE THE HANDOUT

16. Voltage (V)
The electrical force that pushes electrons in a conducting material through a circuit
This push is called voltage or potential difference
Measured in volts (V) with a voltmeter
It can be described as a measure of the electrical pressure produced by a battery or power supply.
Analogy: voltage is like the pressure that pushes water through a hose

17. Voltage or Potential Difference
Defined as the difference in potential energy, per unit charge, between two points in a circuit
Basic Electricity - What is voltage? - Video

18. Electric Potential Difference
ANALOGY #1 – Weights and Pie Plates
What does height represent?
Voltage
What does amount of mass represent? 
Amount of charge
What does the amount of sound produced represent?
Amount of energy released

19. Electric Potential Difference
DEMO #1 – Same mass, different height
When the weights are dropped from different heights, which height generates the louder sound?
Higher
When electrons travel in a circuit, which voltage allows electrons to release the most energy?

20. Electric Potential Difference
DEMO #2 – Same height, different mass
When different weights are dropped from the same height, which weight generates the louder sound?
Heavier 
When electrons travel in a circuit, which amount of charge allows the most energy to be transferred?
Larger
Question: Why can’t a watch battery run a car even if it has the same voltage?

21. Batteries
Battery: one or more electrochemical cells connected together in series or parallel
An electrochemical cell converts chemical energy into electrical energy

22. Producing Voltage
An electrochemical cell works by producing a potential energy difference between the +ve and –ve terminals.
2 types of batteries can produce voltage
Dry cells (eg. in flashlights) and wet cells (eg. car batteries)

23. Battery terminals -Electrodes (usually metals) sit in a substance (paste or fluid) called electrolyte that conducts electricity.
Electrolyte pulls atoms off zinc which leave electrons behind on the zinc electrode – allows negative charge to build up
At same time chemical reactions with copper electrode pull electrons off the copper electrode- allows build up of positive charge
Electrodes become oppositely charged which results in a potential difference (voltage) between the two electrodes.
(how a battery works)

24. Resistance (R): This is the opposite of electron flow.
Created by any device that slows the passage of the electrons
Such as: wires, resistors, light bulbs, stoves, heaters
The current slows down because the electrons are interacting with the atoms in the device
Analogies:
-friction
-rocks in a stream, or a kink in the hose
-lanes of traffic merge to one

25. The amount of resistance depends on:
Type of material the device is made of
e.g. Copper, iron, silver
The path length: path = resistance
Good conductors have very little resistance
e.g. copper and silver
Good resistors slow the current or stop it completely. i.e. iron
e.g. Light bulb –slows current flow allowing electrical energy to change to light and heat energy
Measured in Ohms (Ω) by an ohmmeter

26. Key Questions
What is the difference between static and current electricity?
In current electricity, electrons flow whereas with static electricity they do not
Explain what is the role of a battery in an electric circuit?
The cell or battery is the source that provides the energy to push electrons through the wires and loads. The amount of push is what determines a cells potential difference, otherwise known as voltage. Bigger batteries have more charge so can create more push.
How is pressure in a water hose like voltage in a circuit?
The greater the pressure in a hose the faster the water flows. In a circuit, the higher the voltage from the source the greater the push on the electrons, the greater the current flow in the circuit.
Use the charge of electrons to explain why electrons flow from negative to positive.
Electrons are negatively charged, so they repel and push each other from the –ve terminal to the +ve terminal

27. What is the difference between a closed and an open circuit?
What is the definition of electric current and the unit of measure?
Electric current amount of charge (electrons) passing a given point every second.
Amperes (A)-the ampere is a measure of the amount of electric charge passing a point in an electric circuit per unit time with × electrons, or one coulomb per second = one ampere.[6
What is the difference between a closed and an open circuit?
a closed circuit allows electrons to flow as all parts are connected and the switch is closed. In an open circuit the electrons do not flow because the switch is open. Current will not flow.
What is resistance in a circuit? How is resistance in a circuit like tunnel traffic into Vancouver at rush hour?
Resistance is how hard it is for an electric current to flow through a material. During rush hour three lanes merge into one to enter the tunnel. This happens in a circuit when current flows from a larger wire into a smaller wire like the filament in a light bulb.

28. What is the difference between direct current and alternating current give one advantage and disadvantage of each type of current?
Direct current the electric charge (current) only flows in one direction. Electric charge in alternating current (AC), on the other hand, changes direction periodically.  AC is easier to transform between voltage levels, which makes high-voltage transmission more feasible. DC, on the other hand, is found in almost all electronics. You should know that the two do not mix very well, and you will need to transform AC to DC if you wish to plug in most electronics into a wall . High voltage DC lines experience less loss than equivalent AC lines over extremely long distances. Additionally, HVDC allows different AC systems (e.g. 50 Hz and 60 Hz) to be connected. Despite its advantages, HVDC systems are more costly and less reliable than the common AC systems.

29. Alternating Current vs Direct Current The ongoing Debate!
Online science AC vs DC