Presentation is loading. Please wait.

Presentation is loading. Please wait.

WARM UP You MUST have your IAN Notebooks Today!!!

Similar presentations


Presentation on theme: "WARM UP You MUST have your IAN Notebooks Today!!!"— Presentation transcript:

1 WARM UP You MUST have your IAN Notebooks Today!!!
In your IAN write the answer to this question for 3 minutes without stopping: What do you think an electric circuit is and how do you think it works?

2 Creating a notebook circuit
Unit 13: Electricity & Magnetism

3 Creating a NOTEBOOK circuit
In your IAN, we will create an electric circuit so you can practice with how to open and close the circuit on your own. Watch How!

4 STEP 1: To create a paper circuit, draw a circuit pattern on paper
STEP 1:  To create a paper circuit, draw a circuit pattern on paper.  On one side draw the picture of a battery.  On the other side draw a picture of a light. Make sure to mark the + and – terminals.

5 STEP 2: Get a piece of aluminum foil and roll or crush it into 2 thin “wires” the length of both sides of your paper circuit. STEP 3: Place the aluminum on top of your circuit lines in the notebook. When you are attaching the aluminum foil to the paper, do not cut it. Instead, fold or mold the corner around the circuit line drawn on your paper and continue to apply the aluminum foil. Cutting the strips reduces the flow of energy.

6 Step 4: Tape the foil down with masking tape
Step 4: Tape the foil down with masking tape. Be sure to cover the aluminum in the circuit completely EXCEPT for the ends where the battery and lights will connect.

7 STEP 5: Get a small colored light from your teacher and connect it to your circuit. Tape over the wires and aluminum foil of your light to make sure it doesn’t disconnect from the circuit in your notebook.

8 Step 6: Write on the side or under your circuit the following notes: This is an example of an ELECTRIC CIRCUIT. This is a loop of a conducting material that allows electrons to flow freely in a particular direction, creating an electric current that will light a bulb.

9 STEP 7: You are all finished
STEP 7: You are all finished! Your circuit will not look exactly like this one because you are using different materials, but when it is connected to a battery, it should light up a small colored light! Get a battery from your teacher and TRY IT OUT!

10 Answer these Closing Questions in your notebook
Based on what you have done today, do you know what an electric circuit is? What does an electric circuit do? What can you do with an electric circuit?


Download ppt "WARM UP You MUST have your IAN Notebooks Today!!!"

Similar presentations


Ads by Google