1. Your Institution Logo
Your Department/Program Logo
INSTRUCTIONS FOR FORMATTING THE POSTERS OF THE IX CONEM (BOLD, SIZE 60)
First Author’s Name ( ) (BOLD, SIZE 30) Second Author’s Name ( ) (BOLD, SIZE 30) Institution and address for first and second authors – if the same (BOLD, SIZE 30)
1. INTRODUCTION (BOLD, SIZE 30)
The poster dimensions must be of 120 cm height, and width of 90 cm. The use of color makes the poster more effective and attractive. The text may be written in one or two columns, justify and first line recue of 1,26 cm.
The institution and Department/Program Logo on header of poster must be vertical aligned with ABCM and CONEM’s Logo. (SIZE 30).
(a)
(b)
Figure 2. Results for (a) dy = 0.1 and (b) dy = 0.2.
2. METHOD (BOLD, SIZE 30)
MethodMethodMethodMethodMethodMethodMethodMethodMethodMethodMethodMethodMethodMethodMethodMethodMethodMethodMethodMethodMethodMethodMethodMethodMethodMethodMethod (SIZE 30).
(a)
(b)
(1)
Figure 3. Results for (a) dy = 0.3 and (b) dy = 0.4.
(2)
(a)
(b)
MethodMethodMethodMethodMethodMethodMethodMethodMethodMethodMethodMethodMethodMethodMethodMethodMethodMethodMethodMethodMethodMethodMethodMethodMethodMethodMethod (SIZE 30).
3. RESULTS (BOLD, SIZE 30)
ResultsResultsResultsResultsResultsResultsResultsResultsResultsResultsResultsResultsResultsResultsResultsResultsResultsResultsResults (SIZE 30).
Figure 4. Results for (a) dy = 0.5 and (b) dy = 0.6.
4. CONCLUSIONS (BOLD, SIZE 30)
ConclusionsConclusionsConclusionsConclusionsConclusionsConclusionsConclusionsConclusionsConclusionsConclusionsConclusionsConclusionsConclusionsConclusionsConclusionsConclusionsConclusionsConclusionsConclusionsConclusionsConclusions (SIZE 30).
Table 1. Experimental results.
Method
Property 1
Property 2
Property 3
XYZ
0.014
3.158
1.001
NEW
0.016
3.244
1.096
GHI
0.023
3.601
1.208
5. ACKNOWLEDGEMENTS (BOLD, SIZE 30)
This optional section must be placed after the conclusions (SIZE 30).
(a)
(b)
6. REFERENCES (BOLD, SIZE 30)
This optional section must be placed after the acknowledgements.
Author, A.B., 2012, “Title”, Proceedings of the VII National Congress of Mechanical Engineering, Vol.1, São Luis, Brazil, pp (SIZE 30).
Figure 1. Results for techniques (a) XYZ and (b) NEW.