1. Units of Measurement Precision vs Accuracy
Honors Chemistry
Units of Measurement
Precision vs Accuracy

2. Types of Observations and Measurements
We make QUALITATIVE observations of reactions — changes in color and physical state.
We also make QUANTITATIVE observations that involve MEASUREMENTS with numbers and units.

3. A value (this is the number)
NO NAKED
NUMBERS
A measurement always has two parts:
A value (this is the number)
A unit of measure (this tells what you have)
Example:
200 meters; 15 ml; grams

4. In Chemistry we use SI Units of measure
International System of Units
These are the base units that we will be working with:

5. Some of the derived units we will be using include:
From these base units, we can combine them using mathematical operations to obtain derived units.
Some of the derived units we will be using include:
Density (g/ml)
Area (m2)
Volume (m3)

6. Prefixes Used in the SI System.

7. Metric Prefixes Kilo- means 1000 of that unit
1 kilometer (km) = meters (m)
Centi- means 1/100 of that unit
1 meter (m) = 100 centimeters (cm)
1 dollar = 100 cents
Milli- means 1/1000 of that unit
1 meter (m) = millimeters (mm)

8. To convert from one metric unit to another – remember this pneumonic:
King Henry Died (Unexpectedly) Drinking Chocolate Milk

9. Mass and Weight
Mass and weight are directly related as long as we remain on earth at the same elevation. That is, if one object has twice the mass of another, then its weight on earth would also be twice as large.

10. Mass and Weight
Weight is force of the gravitational pull on an object (pounds, measured with a scale). It would be different on the moon than it is on earth.
Mass is a measure of the amount of matter in an object. (grams, measured with a BALANCE)

11. What is a Liter??

12. Measuring Volume:
The volume of a liquid is measured with a graduated cylinder. When liquid is poured into the cylinder, a curved surface called the meniscus is formed.

13. Learning Check
m = 1 ___ a) mm b) km c) dm g = 1 ___ a) mg b) kg c) dg L = 1 ___ a) mL b) cL c) dL m = 1 ___ a) mm b) cm c) dm

14. m = 1 ___ a) mm b) km c) dm g = 1 ___ a) mg b) kg c) dg L = 1 ___ a) mL b) cL c) dL m = 1 ___ a) mm b) cm c) dm

15. Measured Numbers
When you use a measuring tool is used to determine a quantity such as your height or weight, the numbers you obtain are called measured numbers.

16. Exact Numbers 1 watch 4 pizzas 1 meters = 100 cm
Obtained when you count objects
2 soccer balls
1 watch
4 pizzas
Obtained from a defined relationship
1 foot = 12 inches
1 meters = 100 cm
Not obtained with measuring tools
We will later learn that these numbers do not limit the number of significant figures reported.

17. Learning Check
Classify each of the following as an exact(e) or a measured (m) number. A.___Gold melts at 1064°C B.___1 yard = 3 feet C.___A red blood cell with diameter 6 x 10-4 cm D.___There were 6 hats on the shelf E.___A can of soda contains 355 mL of soda

18. Solution
Classify each of the following as an exact (e) or a measured(m) number. Give reason. A. m Requires a thermometer(measuring tool) B. e From a definition in U.S. system C. m Need measuring tool to determine D. e Counted the hats E. m Measured

19. REMEMBER TO INCLUDE THE DIGIT OF UNCERTAINTY IN YOUR MEASUREMENT.
Two types of instruments used to take measurements.
Digital display -measurement is displayed electronically by machine (Ex: electronic balance)
Scaled instrument -instruments has numbered lines to determine measurement (Ex: ruler)
REMEMBER TO INCLUDE THE DIGIT OF UNCERTAINTY IN YOUR MEASUREMENT. 19

20. A digit that must be estimated is called uncertain.
A measurement always has some degree of uncertainty.
Record the certain digits and the first uncertain digit (the estimated number).

21. For scaled instruments the estimated digit must be determined by YOU.
Graduated cylinders shows each line (scale) represents 1 ml increments.
This instrument is accurate to ones place, therefore estimated digit should be in tenth place.
For scaled instruments the estimated digit must be determined by YOU.
Liquid volume is 43.0 ml not 43 ml. The zero, in tenth place, is the estimated digit. 21

22. Measurement of Volume Using a Buret
The volume is read at the bottom of the liquid curve (meniscus).
Meniscus of the liquid occurs at about mL.
Certain digits: 20.15
Uncertain digit: 20.15

23. The 6 in the tenth place in the estimated digit.
Electronic thermometer is an example of a instrument that uses digital display.
The last digit in these types of instruments is the estimated digit and is always supplied.
The 6 in the tenth place in the estimated digit.
32.6 oC is the correct reading. 23

24. All measurements have some degree of uncertainty. WHY?????
When measurements are recorded CORRECTLY it must be written with a digit of uncertainty (estimated digit) and a unit.
Last digit in ANY measurement is the digit of uncertainty (estimated digit). 24

25. Precision and Accuracy
Agreement of a particular value with the true value.
Precision
Degree of agreement among several measurements of the same quantity.

26. Measurement
Accurate means "capable of providing a correct reading or measurement."
In Chemistry: it means 'correct‘. How close you are to the accepted value.

27. Percent Error
When you calculate results that are aiming for known values, the percent error formula is useful tool for determining the precision of your calculations. The

31. Measurement
Accurate X

32. Measurement X X
Precise X X X X

33. Measurement
Can you be neither accurate or precise?

34. Measurement x
This is a random like pattern, neither precise nor accurate. The darts are not clustered together and are not near the bull's eye. x x x x

35. Measurement
This is an accurate pattern, but not precise. The darts are not clustered, but their 'average' position is the center of the bull's eye. x x x x x

36. Measurement
This pattern is both precise and accurate. The darts are tightly clustered and their average position is the center of the bull's eye. x x x x x