3. Completed Front and Rear Standard 10 ½” 1 ½” 3 ¼” 4 ½” 1” ¾” 1 ½” 6” ¾” Channel Length: 5 ¼”, ¾” from end

4. Insert Top Insert Left Exploded Front and Rear Standard LeftFront All views are from front of camera. Top Front

5. Anchor Piece (Inlay into the side of the Front and Rear frames) 2 ½” 2 ¼” Use a 1/8” metal threaded insert here. 3/8 ” Rotation Piece (This will float freely inside the vertical arm of the standard) 2 ¼” ¼” Hole 1/8” Channel ½” ¾” 1” ¼”

6. Outside of Front Frame Inside Bellows Side Outside Lens Side Side view 6 ¾” ½” 1 ¼” 3 ¼” ½” 1/8” ½” 1 ¼” 7/8” ¾” ½” 1 ¾” Front Frame 1 ½” Outside of Rear Frame Outside Focusing Screen Side Inside Bellows Side Side view ¼” ½” ¾” Rear Frame 6 ¾” ¼” ½” 5 ¼” ½” ¼” ¾” ½” ¼” ½” 7/32” hole on the top and bottom center and 1/8” in for thumb screw to hold Film Holder frame

7. Outside of Film Holder Frame Outside EdgeInside Edge Side view Spring Back Frame 6 ¾” 7/8 ” 5” ¼” Route a groove to fit the film holder. Cut longer than required. Excesses will be covered by spring back rails. 5/8 ” ¼” 4” 1 3/8 ”1 1/8 ” 21/32 ” Completed Spring Back

8. Close-up of Completed Spring Back Top Left Side Bottom

9. Bottom Rail 6 ¼” App. 11/32 ” 5 ½” Side Rails 6 3/8 ” ¼” ¾” 1/8 ” 3/8 ” 1 ¼” 1 ½” 7/8 ” 7/32 ” 1 ½”1 ¼” ¾” ½”

10. 4” 5” Ground Glass Frame ¾” 3/16 ” Side View of Ground Glass Frame to Show Spacer

11. 5/8” 5 ½”

12. 40” 7” 6” 9” Inside Dimensions to fit your frame Final Assembly Front and Back Panels Side Panel Inside Dimensions to fit your frame 10”

13. 40 30 20 10 0 40 30 20 10 50 40 30 20 10 0 40 30 20 10 50 2 1 0 1 12 0 1 2 0403020108070605090403020108070605090