1. Plumbing Systems: CH 39 (C.M.M. & T) Text book By: Garcia-Ramirez

2. Learning Objectives:  Relate plumbing codes to plumbing system Design  Understand the types of piping, tubing, and fittings used on Plumbing System  Be knowledgeable about the sources of potable water and its’s distribution.  Understand the components of sanitary piping systems.

3. Key Terms: Air Gap.Portable (drinkable water)Instantaneous Water Heater.Riser.Branch Soil Pipe.Composting ToiletInterceptor.Sanitary Piping.Build Drain. Drainage, Waste, and Vent Installations (DWV). Non- Portable Water.Sanitary Sewer.Build Sewer.Fixture UnitOakum. Scupper. Cleanout.Gray Water.Plumbing Chase. Soil Stak.Valve.Vent Pipe.Waste Pipe. Gas

4. Plumbing System is Composed of two Separate Subsystems: 1.Potable Water- Drinkable (freshwater) 2.Non-Potable Water Non- Drinkable (wastewater)

5. Plumbing Codes:

6. Potable Water Supply- City: Sample

7. Potable Water Distribution Systems at Home:

8. Plumbing Distribution – Residential House.

9. Plumbing Plan

10. Brac System Works

11. Brac System

12. Gas Distribution Systems:

13. Piping, Tubing, and Fittings

14. Valves: Controls the flow of water, oil, gas or chemicals

15. How valves are used?

16. Traps: ex: Lavatories: P Tubs: Drum “Vent pipe keeps the water in the trap of the fixture under atmospheric pressure, illuminates the chance of its being siphoned out when another fixture is being used.” illuminates the chance of its being siphoned out when another fixture is being used.”

17. Residential Sanitary Piping:

18. Multistory Building Sanitary Piping System:

19. Multistory Building- Systems

20. Non-Potable Water Systems:

21. Roof Drainage- & Water Heating-