1. ELECTRICAL SAFETY GA Ag Ed Curriculum Office To accompany the Georgia Agriculture Curriculum Lesson AG-AMI-01.4212010 VGP

2. Electrical Safety Have You Ever Been Shocked?

3. STANDARDS FOR SAFETY MILLIAMPS RESULTS 0-10 can hold 10 – 13let go current 13 -18 freezing, can't turn loose 18 - 24 unconscious, hard breathing 24 - 50 unconscious 50 - 200 affects heart, stops rhythm (ventricular fibrillation)

4. STANDARDS FOR SAFETY What is an accident? Def: An unplanned event caused by unsafe acts and unsafe conditions. 80% of accidents are caused by unsafe acts! 20% of accidents are caused by unsafe conditions!

5. STANDARDS FOR SAFETY What are some factors that may cause an accident and possibly injury?  A. Background of the person.  1. Home conditions  2. Personal habits  3. Inexperience  B. Defects of the person.  1. Lack of knowledge or skill (not ready) 20%  2. Improper attitude (not willing) 70%  3. Physical deficiency (not able) 5%  C. Unsafe acts or unsafe conditions.

6. STANDARDS FOR SAFETY What are some electrical unsafe acts and unsafe conditions that may cause injury, death, or fire? A. Using appliances, tools, and equipment that are improperly grounded B. Failure to use Ground Fault Circuit Interrupters (GFCI) in damp locations. C. Using improper size and type electrical conductors. D. Using electric motors that are too small or lack the proper starting characteristics for the load. E. Improper circuit protection or over fusing.

7. STANDARDS FOR SAFETY  F. Failure to provide the proper grounding for the system.  G. Failure to use the proper size and type Service Entrance Cable.  H. Failure to use the proper electrical devices.  I. Failure to properly secure or anchor electrical conductors and devices.  J. Overloading circuits.  K. Improper wiring methods and procedures.  L. Inadequate knowledge of electricity and electrical Wiring. 

8. STANDARDS FOR SAFETY Personal Protective Equipment (PPE) 1. Hard hat 2. Steel-toed shoes a. Rubber heels and toes without nails help insulate against shock 3. Safety glasses 4. Clothes should fit well - Snug 5. No jewelry - metal rings or watchbands 6. Tools should be used that offer you the most protection possible.

9. STANDARDS FOR SAFETY Safety devices are available to be used in electrical circuits to provide protection for individuals and wiring. 1. Ground Fault Circuit Interrupters (GFCI) 2. Portable GFCls 3. A Circuit Breaker 4. A Fuse

10. STANDARDS FOR SAFETY  Overload is a condition when too much current flows through the wires, an appliance, a meter, a transformer, or other load being served"  A short circuit is a condition where too much current flows through the wires because the wires of the circuit are touching one another.  A Ground Fault is a condition where the hot wires come into contact with a grounded metal conduit, water pipe, gas pipe, or any other grounded conductive object or surface.

11. STANDARDS FOR SAFETY OTHER SAFETY CONSIDERATIONS: o A clear work area o Ladders o Wet locations o Common Sense 1. Turn off main service entrance 2. Remove fuse 3. Turn circuit breaker off 4. Test circuit o Animals o Power Line Safety

12. STANDARDS FOR SAFETY National Electrical Code Local Electrical Code Power Company Requirements Underwriters Laboratory (UL)

13. NATIONAL ELECTRICAL CODE History of the National Electrical Code Purpose of the NEC How Often the NEC is updated Scope of the NEC Enforcement of the NEC Using the NEC

14. STANDARDS FOR SAFETY Code Arrangement Methods of Locating Articles and Tables

15. LOCAL ELECTRICAL CODES Local authorities may adopt NEC May adopt NEC with modifications Local wiring permits and inspections

16. UNDERWRITERS LABORATORY UL Listed assures product meets minimum safety standards UL Listed does not mean that product is safe for all installations UL Listed is not an indication of quality