1. Global Plasma Solutions® Introducing the GPS-iClean™
Engineering Air for a Better World™

2. Global Plasma Solutions
GPS-iClean Features
Duct mounted
Self Cleaning
cfm
24 volt – 240 volt in single SKU
Digital display
Replaceable emitters
Capacity does not reduce over time
Provided with Weatherproof housing
UL and cUL listed

3. Global Plasma Solutions
GPS-iClean Benefits
Reduces Particles (no more sunbeams)
Reduces Odors (cooking, pet, VOCs, etc.)
Reduces Pathogens
Kills mold
Reduces Ventilation Requirements
Reduces Allergens
Reduces Dusting Requirements
Prevents and Eliminates Dirty Sock Syndrome
No Replacement Parts

4. Global Plasma Solutions
Duct Mounting the GPS-iClean
The GPS-iClean requires a four inch round hole for duct mounting.
Mounting in the return downstream of filters is preferable, but the supply is also acceptable.
Return mounting allows the elimination or prevention of dirty sock syndrome and treats the evaporator coil.

5. Global Plasma Solutions
GPS-iClean Self Cleaning Function
The GPS-iClean is provided with a wiper blade on the rear of the unit that is set up from the factory to activate and clean the carbon fibers once every five days.

6. Global Plasma Solutions
GPS-iClean Self Cleaning Function
The Cycle Cleaning Test button can be used to test the cleaning function. This button can also be used to change the days between cleaning cycles to 1, 5, 10 or 20 days. Simply press the cleaning button once and while the display shows “CLEA” hold the button in again for five seconds and when numbers appear, press the button until you see the number of days you want to to go between cleaning cycles.

7. Global Plasma Solutions
GPS-iClean Weatherproof Casing
The GPS-iClean is provided with a weather tight mounting bracket and cover so the unit can be duct mounted indoors or out.

8. Global Plasma Solutions
GPS-iClean Capacity
The GPS-iClean is rated for cfm. It can be applied on both residential and light commercial projects. This unit produces over 200 million ions/cc and the self cleaning function insures the unit will always be at peak performance especially when the end user needs it most.

9. Global Plasma Solutions
GPS-iClean Electrical Characteristics
The GPS-iClean can operate on 24 through 240 volts out of the box. Just wire as shown in the below image.
Black: VAC
White: Neutral
Grey: VAC
Purple: Alarm
Green: Alarm

10. Global Plasma Solutions
GPS-iClean Digital Display
The GPS-iClean will flash “GPS,” “ON,” and a number such as “1” during normal operation. The numeral indicates the days the unit has been in operation.
It will also flash “CLEA” when it’s in the cleaning mode and “FALT” when there is a unit fault.

11. Global Plasma Solutions
GPS-iClean Replaceable Emitters The GPS-iClean has been designed to easily replace the emitters with one screw. Extensive testing has shown the emitters in most cases will not need to be replaced under normal operating conditions, but they have been designed for easy replacement in the event they do wear out in 20 years!

12. Global Plasma Solutions
GPS-iClean is always at peak capacity

13. Global Plasma Solutions
GPS-iClean Takeaway Points
There is no other IAQ Product being offered today that does not degrade over time except for the GPS-iClean. The GPS-iClean is always at peak capacity.
The GPS-iClean is a perfect replacement for any duct mounted PCO product. Voltage is never an issue and there are no byproducts or ozone concerns.
The GPS-iClean is a product the end user can actually view the display year after year and know that it’s reducing contaminants in their environment.

14. Global Plasma Solutions
THANK YOU FOR CONDISERING GPS!