1. Introduction Thank you for taking the time to view this slideshow, it will walk you through the re- assembly and pieces of your watch. Thank you for taking the time to view this slideshow, it will walk you through the re- assembly and pieces of your watch. To skip a slide simply press the right arrow key or to go back to a previous slide, press the left arrow key. To skip a slide simply press the right arrow key or to go back to a previous slide, press the left arrow key. Thank you again and enjoy the show. Thank you again and enjoy the show.

2. As Found minus bezel

3. As found red paint seal

4. As found bezel

5. As found back of bezel

6. As found without the crystal

7. As found dial close up

8. As found empty case front

9. As found case back

10. As found virgin lock ring and foggy crystal

11. Decomposed Crown Gasket

12. Decomposed Gasket

13. As Found Gooey old Gasket

14. As found locking bolt with decomposed gasket

15. Locking bolt cleaned

16. As found auto side movement

17. As found train side movement

18. As found Micro Regulator

19. As found plastic hack

20. As found stripped calendar side

21. Caliber number and decomposition stains

22. As found balance with cock

23. As found inside caseback

24. As found after Ultraviolet exposure

25. As found dial in low light

26. Under Blacklight

27. New and old dials

28. Finished wind set calendar

29. Ratchet wheel before and after

30. Serial Number

31. Finished, clean, and ready to assemble

32. No more stains

33. Finished train sans bridges

34. Finished train sans auto

35. Finished wind set calendar partial

36. Finished train side

37. Finished movement

38. Finished movement 2

39. Final dial side

40. Case parts

41. Finished back profile

42. Finished back with bracelet

43. Finished Profile

44. Finished from front

45. Finished profile

46. Finished on bracelet

47. Finished profile

48. Registered Watchmaker’s casemark on watch

49. Finished in all it’s glory!