1. Resource 2016 Flexgen Trustee Month End - Year End 1

2.  Pre-Month End -Balancing Accounts - Balancing Reports  Reminders - July 1 st - June 30 th  Month End  Year End

3. Balancing Accounts Look closely at the Trial Balance in advance of June 30. Several accounts should carry a 0.00 balance by June 30 th. Use this time to review and correct these accounts, so you don’t carry issues over to the new year. 28310 Undistributed Taxes Balances in 28310 are from voids or re-receipts that didn’t work as planned. The Account Analysis (credit) will show what receipt number was voided. You can also search a receipt detail report for “NO $” to help identify a debit to 28310. Check Cash On Hand and Bank Accounts for out of balance. If there was a refund involved it could involve 21100. Start with > Inquiry > Property Tax Receipts and write down each transaction and the details. Mid June

4. 11410 Accounts Receivable / ACV The ACV account 11410 (or possibly the balance between 11410 and 11410-999) should equal your UnReconciled ACV report. If this is out of balance determine if the GL 11410 (or the sum of 11410 and 11410-999 combined) has more or less than the UnReconciled report. If there is too much on the GL 11410, a receipt or two may have gotten reconciled when they shouldn’t. Retrieve the payment detail from the State and compare the against the Reconciled ACV Report. Verify the reconcile date/month. Check the Misc Receipt or manual entry to verify the State payment amount, and the GL account. Look for manual adjustments. If the GL 11410 has less than the UnReconciled ACV’s, it’s just the opposite of the above, possibly missed reconciling a few. Use the same suggestions above to help find the issue. Mid June

5. 21100 Accounts Payable / Refunds Entries are made to this by using the Overpayment Flag=Yes on receipts or void reasons. A refund check (CD) is posted against this account and the Bank. It should come back to 0.00. To Troubleshoot, print the Account Analysis for 21100. Entry’s should cancel each other out. What remains are the issues that need researching. There are many reasons it’s out of balance; a Refund Check was posted for the wrong amount, there is the same amount off in another account like 28310, a receipt should have been marked as overpayment but change was given back, or vice versa. Reports that can help with Overpayment issues are under Day End menu: Change Due by drawer, and Overpayment. Mid June

6. 14310 Undistributed Warrants (Unreconciled) 14310 will be balanced according to your local process. If you distribute warrants the same time as reconciling, then 14310 will almost always come back to 0.00 after the funds have been transferred. If you distribute warrants as soon as they are loaded in to the system, later reconciling and transferring funds, then the balance on 14310 should match the Un-reconciled warrant report. If there is a clearing bank somewhere in this process that will be a different balancing process also. Use the process you’ve always done. Be sure you can prove any balance if audit asks. Mid June

7. 29900 Trustee’s Commission Some Trustee’s transfer this balance to the County Mayor at each month end. Others pay out their expenses out of this account. The commission account will be looked at by audit, have documentation on money transferred that is non commission. Mid June

8. BEFORE RECEIPTING IN JULY Balance & Print ‘Tax Aggregate by Tax Year’ Report Menus > Reports > Audit > Tax Agg by Tax Year. Print Paid/Unpaid Listing(s) Print any paid and/or unpaid listings as of June 30 th, per your auditor requirements, before receipting any taxes in July. Print Summary Net Change Report Menus > Reports > Audit > Summary Net Change 8 July 1

9. 9 Change Revenue Allocation #’s Your Revenue Code for Prior Year Taxes (40120 for example) needs to have the allocation table number updated to 2015. Go to the Revenue Control and change the assigned allocation table number. > Menus > System Control > Revenue July 1

10. Change Default Codes before receipting July 1 receipts Effective July 1, 2016, your current year (2015) taxes become prior year taxes. You will need to change your default revenue codes relating to 2015 tax revenue (example: change 40110 to 40120). > Menus > System Control > Default Codes. 10 July 1

11. Miscellaneous Receipting: before receipting miscellaneous revenue in July you may want to change your Misc. Receipt Year to 2016; either now or when you load your taxes. Menu > System Admin > Control File > Trustee System Control 11 July 1 (Do not change your Current Tax Year at this time)

12. Discounts If you offer an early payment discount, you will need to turn off that option for 2015 tax.  Menu> System Control > Sys Control > Discount Key in the tax year 2015 and the month(s) that you offer a discount: Usually 10=October and 11=November or any other month(s). > F6 Delete. 12 July 1

13. Before Starting The Month End Close Print Un-prorated Report Distribute / Reconcile Warrants Print Reports Post School and/or October Commission Balance Bank Statement & COH Merge accounts or change descriptions before June 30 close Final Review of Trial Balance accounts; 14310, 21100, 28310, 29900, 11410; If you have 2 accounts for ACV 11410 & 11410-999 merge them so that the 11410-999 carries the balance into the new year. Do the same if you have County Match accounts 11440 and 11440-999. Balance the GL Reports Pre Month End

14. Balancing Reports Not for balancing Pre Month End Balance Sheet

15. The ending balance of the MTD report matches the Trial Balance Pre Month EndTrial Balance M-T-D Trustee’s Report

16. To research Reports not balancing to each other, display journals for only that Department. Go to Standard Reports and choose #2 Department. 2 Pre Month End

17. M-T-D Trustee’s Report

18. The Warrant Journal should match the Disbursements on the MTD Report. (it should also match the Monthly WA report / distributed WA’s) Use the correct Transaction Type (WA, CR, etc.) when correcting or posting items. The MTD report groups transactions by Type. Pre Month End Warrants Journal

19. The MTD and Trial Balance tie back to the RDB Report Pre Month End M-T-D Trustee’s Report Trustee’s M-T-D Cash Receipts, Disbursements, and Balances Report

20. Troubleshooting GL Reports If the reports don’t balance each other it’s usually an entry that was made using the wrong Transaction type. Start by pulling an Account Analysis by Transaction for the month. Leave the Trans Type blank and default in 999/ZZZ so all Transaction types display. Then search for that amount. To correct a wrong Transaction Type posting. Reverse what is posted by using the same date and the same (wrong) Transaction Type. Re-post the entry with the correct Transaction Type. The Trial Balance/Balance Sheet bottom line should read Total County Trustee with a Ending Balance of 0.00 If there is an amount other than 0.00, check to see if any new departments were added. Account # 21500 needs to be entered under >Menus >Accounting > Add New GL Account for new departments. If that is not the issue, try the search listed above by All Transactions. FIND Pre Month End

21. Accounting > Period End > Month End. Only the 1 person completing this process should be logged in! Make a Backup The month end menu contains reminders of items you might want to do before closing… We recommend you purge receipts and warrants only once per year, and keep a full 12 months worth of data. Once Period End is started the accounting month will be placed “on hold” and you will not be able to make any more entries. At that point you will get an error about your accounting date. If you must make another entry and you have started the Month End, you will need to contact LGC for assistance in setting your month back. 21 Month End

22. Step 1 Scan For Unposted Transactions. An error on step 1 means that that there is a Journal Entry, CD etc. waiting to be posted for this accounting month. Note the user’s name. Select OK and see another message stating that Step 1 did not complete correctly, choose OK again. Have the User listed in the message login. Go to Manual Transactions and research for the unposted entry. No other User can login and research this “transaction batch” error. The Month End process can not resume until this transaction is posted or deleted. If this user is not in the office, contact LGC and we will assist you in getting past this error. 22 Month End

23. Step 2 Trustee Reports This begins the printing process for Month End with copies of the MTD and RDB Reports. If your printer has jammed or you have selected the wrong printer, you can restart printing without contacting LGC; Exit the screen and return back to the Month End Menu. Choose Month End Closing and then select Step 2 of the Period End Process again. A Warning will show this step has been executed. Hit and then choose Step 2 again and select your printer. 23 Month End

24. Step 3 Accounting Reports Prints the remaining Month End Reports; Trial Balance, Cash Journals, Cash Disbursements Journal, Journal Entries, Department Reports, Account Analysis. We can customize this to print duplicate copies of all or some of these reports. As with Step 2, if your printer jams or you have selected the wrong printer, you can back track at this point without contacting LGC; Exit the screen and return back to the Month End Menu. Choose Month End Closing and then select Step 3 of the Period End Process again. This will show a warning that this step has been executed. Hit and then choose Step 3 again, choose your printer. Step 4 Clear Accounting Flags closes out your Month End and finalizes the process. This step does not print any reports. Make Backup #2 24 Month End

25. Year End This is mostly Time Management at this point. Balancing has already been done, June is closed you can’t make any more entries. Its just a lot of reports to print off, plus one last balancing process in Step#4. Keep everyone out of the system while Year End is being run. Make sure you have plenty of paper, toner, and time. Print extra copies of MTD and Monthly RDB reports before closing the year. Once the year is closed you will have minimal access to prior year reports Run the First Step Under Year End Processing “Copy Files To Work Directory” then continue to the Year End Close. Year End 25

26. The steps are much like month end: Year End 26

27. TRUSTEE YEAR-END CLOSE: EVERYONE ELSE NEEDS TO BE LOGGED OUT OF FLEXGEN. > Menus > Accounting > Period End > Year End Closing Select this option to get the following menu items: #1 Scan For Unposted Transactions This will scan the accounting files for entries that have not been posted. If no errors are found, the status will be 'COMPLETE'. If unposted transactions are reported, they must be analyzed before continuing. #2 Accounting Reports (you may want to print these on 2-part paper, or if you are printing on a Laser Printer wait for step 2 to stop printing, and then go back and select it again ) This will print 5 reports in the following order: 1) YTD Receipts, Disbursements, and Balances Report (RDB) 2) Year-To-Date Trustee’s Report 3) Trial Balance June 30, 2016 4) Balance Sheet June 30, 2016 5) YTD Account Analysis Year End 27

28. #3 Close Accounts This copies the General Ledger and Transaction File to a History File. This option will also reset the general ledger balances for the new year. #4 Accounting Reports (After Closing) –(again, you may want 2 part paper, or if you are printing on a Laser Printer wait for step 4 to stop printing, and then go back and select it again ) This will print a Trial Balance and a Balance Sheet dated July 1, 2016. You must compare the July 1, 2016 Trial Balance to the ones printed at June Month-End close. Verify that the ending balances from the June Close match the beginning balances for July 1 st. If they do not match, STOP here and contact LGC. Year End 28

29. #5 Create STATEPC Audit File This creates a file for state audit. You will not be prompted for a diskette at this time. #6 Update Transaction Posted File This process updates the transaction file with transactions for the new fiscal year. Backup Files (#3) Make your last daily backup. This is your July 1, 2016 starting point. Label the tape "Beginning Fiscal Year 2016-2017, Do Not Destroy". Keep this backup in a safe place. This Completes The Year End Closing Process ! Year End 29

30. 30