1. Product Guide “Line Thermal Kiosk Unit” Product Guide “Line Thermal Kiosk Unit” August 2007 PMU 2300 “Horizontal solution” PMU 2301 “Vertical solution-1” PMU 2302 “Vertical solution-2”

2. Kiosk unit, ATM, etc Various data printingMedical measurement record Parking ticket/receipt Application 1) Owing to removable head design, it facilitates easy recovery from paper jam and head cleaning 2) Small foot print and compact design (Wide varieties of paper holding style 28 patterns) 3) Paper width: 58 / 60 / 80mm 4) Paper roll diameter selectable from 60 / 80 / 102mm 5) 150 mm/sec high-speed printing 6) Auto cutter selectable from full-cut or partial-cut 7) Parallel, Serial or USB interface available 8) Black mark sensor and thicker paper (0.110~0.150mm) available (Option) 9) Paper end sensor is default (Paper near end sensor is option) 10) Wider operating range: -20 ~ 60 ℃ (Optional AC adaptor: 5~40 ℃ ） Main features Others 1) Optional accessories: AC adaptor 35AD (AC adaptor + AC cable) 2) Drivers: Windows, Linux CUPS, OPOS (end of 2007) 3) Customization software

3. A Paper roll insert from many directions Paper roll installation Release the stopperInsert the paper roll to the paper shaftLock the stopper From left From right From top Auto paper loading Set up of ＰＮＥ (Paper Near End sensor) Unscrew with holding the paper shaft This is a position to detect a paper end with less paper remained. This is a position to detect a paper end with much paper remained. Move the PNE to the appropriate position. In order to assure the PNE position, please refer the △ marking and scale. After verifying the position, screw the PNE with holding the paper shaft. CB

4. Others 1. Platen detachable for easy maintenance for paper jam, head cleaning, etc 3. Power connector is 4-pin-rectangle 2. Customization is available4. LED and FEED button Control Board Serial connector: 9-pinsParallel connector (Centronics connector is not included) ＵＳＢ connector Connector to the external operation panel Power and Error LED FEED button

5. Black Mark sensor (Option) Main PCB board Dip switch FFC connector Power connector I/F Description Auto cutter Platen open lever Platen holder Printer mechanismShaft stopper E ring Paper shaft PNE sensor (Option) Paper shaft holder Feed switch Power/Error LED Printer head Platen Black Mark sensor (Option) Separator for 2 inch width paper roll (Option) Rear guide

6. Standard installation (1) “Horizontal solution” Insert from Right-1 (Closer) Paper diameter 102mm Paper diameter: 80mm Paper diameter: 60mm ＰＮＥ position: Movable Wide variety of paper roll insert and load 12 patterns 3 patterns Paper insert from top Insert from Right-2 (Standard)Insert from Right-3 (Farther) Insert from Right-4 (Farthest) Insert from Top-1 (Closer)Insert from Top-2 (Standard)Insert from Top-3 (Farther)Insert from Top-4 (Farthest) Insert from Left-1 (Closer)Insert from Left-2 (Standard)Insert from Left-3 (Farther)Insert from Left-4 (Farthest) Paper insert from left Paper insert from right Fixation by 4-screws “By combinations of paper shaft and shaft stopper”

7. Standard installation (2) “Vertical solution / Front hold” Insert from Right-1 (Closer) ＰＮＥ position: Movable Wide variety of paper roll insert and load 12 patterns Insert from Right-2 (Standard) Insert from Right-3 (Farther) Insert from Right-4 (Farthest) Insert from Top-1 (Closer) Insert from Top-2 (Standard) Insert from Top-3 (Farther) Insert from Top-4 (Farthest) Insert from Left-1 (Closer) Insert from Left-2 (Standard) Insert from Left-3 (Farther) Insert from Left-4 (Farthest) 3 patterns Paper insert from topPaper insert from left Paper insert from right “By combinations of paper shaft and shaft stopper” Paper diameter: 60mm Paper diameter: 80mm Paper diameter: 102mm Fixation by 4-screws

8. Standard installation (3) “Vertical solution / Back hold” Insert from Right-1 (Closer) ＰＮＥ position: Movable Wide variety of paper roll insert and load 12 patterns Insert from Right-2 (Standard) Insert from Right-3 (Farther) Insert from Right-4 (Farthest) Insert from Top-1 (Closer) Insert from Top-2 (Standard) Insert from Top-3 (Farther) Insert from Top-4 (Farthest) Insert from Left-1 (Closer) Insert from Left-2 (Standard) Insert from Left-3 (Farther) Insert from Left-4 (Farthest) 3 patterns Paper insert from topPaper insert from left Paper insert from right “By combinations of paper shaft and shaft stopper” Paper diameter: 60mm Paper diameter: 80mm Paper diameter: 102mm Fixation by 4-screws

9. 11) Paper holder position 1: Closer to mechanism 2: Standard 4: Far from mechanism 8) Black mark Sensor No mark: Not equipped M1: Black mark (Left)  Not available for PMU2310/2210/2212 M2: Black mark (Right) PMU2 3 0 0 A – RS U P M1 – 8 L 2 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) Model Classification 1 ） Mechanism 2: LT-2221 (2 inch) 3: LT-2321 (3 inch) 2 ） Paper width 0: 58mm(2 inch) / 80mm (3 inch mechanism) 1: 60mm(2inch) / 60mm(3 inch mechanism)  Paper guide for 60mm included 3) Installation style 0: Vertical solution 1: Horizontal solution (Front holding) 2: Horizontal solution (Back holding) 4) Paper thickness No mark: Standard A: Thicker paper 5) Interface RS: Serial UB: USB PA: Parallel 6) Character set U: USA/Europe characters 9) Paper holder diameter set 1: 102mm diameter roll 8: 80mm diameter roll 6: 60mm diameter roll 10) Paper roll insert direction L: from Left R: from Right T: from Top PMU2300 3 inch, horizontal type with paper holder on back side PMU2301 3 inch, vertical type with paper holder on front side PMU2302 3 inch, vertical type with paper holder on back side PMU2310 3 inch, horizontal type with 60mm paper guide 7) Paper-near-end sensor No mark: Not equipped P : Paper Near End sensor equipped PMU2200 2 inch, horizontal type with paper holder on back side PMU2201 2 inch, vertical type with paper holder on front side PMU2202 2 inch, vertical type with paper holder on back side PMU2210 2 inch, horizontal type, 60mm paper guide PMU2212 2 inch, vertical type, 60 mm paper guide with paper holder on back side

10. PMU220XPMU221XPMU231XPMU230X Printing methodLine Thermal Dot Printing Printing width54mm (432 dots/sec)72mm (576 dots/sec) Printing speed MAX 150mm/sec (1200 dots/line) Number of Columns Font A ： 36 (48) columns Font B ： 48 (64) columns Font C ： 54 (72) columns Character size (W x H) Font A ： 1.50 x 3.00 mm (12 x 24 dot) Font B ： 1.13 x 3.00 mm (9 x 24 dot) Font C ： 1.00 x 2.00 mm (8 x 16 dot) Character table Codepage 437 、 850 、 852 、 857 、 858 、 860 、 863 、 864 、 865 、 866 、 Katakana, WPC1252, Thai code18 Barcode type UPC-A/E, JAN （ EAN ） -13/8, ITF, CODE39, CODE128, CODABAR, CODE93 Paper Width58mm60mm80mm, 60 mm80mm Thickness Standard: 0.060 ~ 0.105mm Option: 0.110 ~ 0.15mm InterfaceSerial, Parallel, USB Input buffer4K, 45 byte Power supply DC24V +/- 7% Current: 1.9A (Peak: 6A) Operating range － 20 ~ 60 ℃ 35 ~ 85% (No condensation) Reliability Printer head: 100km, 1,000,000,000 pulses Auto cutter: 1,000,000 cuts (Using thicker paper/partial cut with center one tab remain: 300,000 cuts) Specifications

11. Thank you