Download presentation
Presentation is loading. Please wait.
Published byMadison Lang Modified over 8 years ago
1
Back to Basics: Lesson 3 Conformal coating Application methods
2
Brushing Hand dispensing Hand spraying Dip coating Selective Coating Cost, Throughput Back to Basics: Lesson 3
3
Advantages: Minimal capital investment Low / med skill No masking Disadvantages: Slow process Inconsistency Contamination Operator exposure Operator dependent Recommended for: Low volume, complicated board design Brushing Back to Basics: Lesson 3
4
Advantages: Low capital investment Quantitative method Semi automatic technique For gels and high viscosity Negatives: Slow process High film build Recommended for: Low volume, requirement for gels/high viscosity with connectors etc Hand Dispensing Back to Basics: Lesson 3
5
Advantages: Low capital investment Simplicity Tooling easily available Disadvantages: Exposure / Emissions Consistency Cleanliness / Overspray Masking Recommended for: Medium volume, Military customers as 2 coats can be quickly applied Hand spraying Back to Basics: Lesson 3
6
Advantages: High throughput Good penetration underneath components Good control of film thickness Recommended for: Medium/High volume, suitable board design, Disadvantages: Contamination Masking Safety/exposure Dip coating Back to Basics: Lesson 3
7
Advantages: High throughput Can be used with UV40 Recommended for: High volume, UV curable Disadvantages: Expensive Requires tooling for each PCB Safety/exposure Selective Dip coating Back to Basics: Lesson 3
8
Selective coating Advantages Repeatable results Reduces labour costs Increases productivity Improve quality No / little masking Disadvantages: Capital investment Training required Recommended for: High volume / throughput demands Selective Coating Back to Basics: Lesson 3
9
Asymtek SC300 Tri Mode
10
SELECTIVE COATING EQUIPMENT ASYMTEK FILM COATER ASYMTEK SWIRL PVADIMA HC-200 ApplicatorSC-200 SC-100 SC-300FS-ES-100 FS100-CF DD-5140 PrincipleNon atomised curtain coat Atomised spray coat Atomised spray coat and film coater Atomised spray coat Coating Viscosity Application Range < 100cPs> 100cPs23- 1000cPs Optimum Humiseal Viscosity23 cPs 65 cPs 250cPs 500cPs 23cPs / 65cPs 250 / 500cPs 23cPs / 65cPs 250 / 500cPs Coating TechnologySolvent Based100% SolidSolvent based And 100% Solid Solvent based And 100% Solid Back to Basics: Lesson 3
11
www.humiseal.com HumiSeal 295 University Avenue Westwood MA 02090 USA Tel: +1 781 8332 HumiSeal Europe 505 Eskdale Road Winnersh Wokingham Berkshire RG41 5TU United Kingdom Tel: +44 (0)1189 442 333 Back to Basics: Lesson 3
Similar presentations
© 2024 SlidePlayer.com Inc.
All rights reserved.