1. New Fast Wire Scanner for Booster Mechanical Design review 2016_01_19 2016/01/19 1 On behalf of: - EN/MME: Alain Demougeot, Nicolas Chritin - BE/BI: Dmitry Gudkov, Paolo Magagnin, William Andreazza

2. Overall view 2 Drawing in CDD/EDMS: PSBBWSRA0001 2016/01/19

3. Overall view 3 17 Kg BEAM ? ? 23 Kg 2016/01/19

4. Overall view 4 Inner Ø120mm (Beam tube) 480 mm Ø354 mm 475 mm R153mm 2016/01/19

5. Kinematic Principle 5 Drawing in CDD/EDMS: PSBBWSRA0005 2016/01/19

6. Stepped vacuum chamber 6 3 thin walls: 0.3mm 0.4mm Drawing in CDD/EDMS: PSBBWSRA0025 2016/01/19

7. Sub-assemblies 7 2016/01/19

8. Shaft 8 2016/01/19

9. Adjustments: 9 2016/01/19

10. Stator/rotor Assembly 10 2016/01/19

11. Final assembly 11 2016/01/19

12. 12 1 3 2 2016/01/19 360 mm Installation or dismantling

13. 13 1 4 32 2016/01/19 Minimum gap 12mm

14. 14 Ready: - WS + vacuum vessel 3D design  36 drawings ready for control #1 To be finalized: - Forks - Optical disc - Adjustment table + frame - Handling device ?? Conclusion 2016/01/19