Presentation is loading. Please wait.

Presentation is loading. Please wait.

7: Wireless Technologies Networking for Home & Small Business.

Similar presentations


Presentation on theme: "7: Wireless Technologies Networking for Home & Small Business."— Presentation transcript:

1 7: Wireless Technologies Networking for Home & Small Business

2 Objectives

3 Understanding Wireless Electromagnetic Spectrum –Radio, TV, Light, X-Rays, Gamma Rays –Each has a specific wavelength Like the distance between waves Wireless uses Electromagnetic Waves –Same as carrying radio signals We’ll discuss the most common wavelengths

4 Infrared (IR) Low energy Can’t go through walls, short range (30’) One to one communication –Wireless Mice & Keyboards, Remotes, PDA –Infrared Direct Access (IrDA) port

5 IR & Your TV Your TV remote has an infrared LED inside Switches on & off to create 0’s and 1’s when you push a button –Push a button to send a 7 digit sequence of 0’s & 1’s –Sony TV Channel Up is 0000011, channel down is 0010001

6 Radio Frequency (RF) Wireless LAN, cordless phone, Bluetooth LAN & Phone –Signal travels through walls, longer range, higher power –900 MHz, 2.4 GHz and the 5 GHz frequency Bluetooth –Low speed, short range, lower power –One to many devices –Uses 2.4GHz –Starting to use Bluetooth for wireless mice, etc.

7 Activity- Which is it?

8 Review Bluetooth or RF. Which has higher power output? –RF Two doctors are beaming their business cards to each other through their PDAs. Which signal is being used? –IR

9 Wireless Benefits

10 Wireless Limitations Cordless Phones 2.4GHz Interference Microwave Ovens Interference Not as fast as wired Security –Ease of Access Size of Building –Range Solid Walls

11 WPAN Wireless Personal Area Network –Used to connect wireless mice, keyboards & PDA’s to computer –IR or Bluetooth –Short Range –Device to device

12 WLAN Wireless Local Area Network –RF –IEEE 802.11 standards –Users connect to a wired network through an Access Point (AP) –Medium range

13 Access Point Between your wired equipment and your wireless devices

14 WWAN Wireless Wide Area Network –Cell phone network –GSM, CDMA –Long range –Government regulated

15 Review

16 Wireless Standards Specifies data speed, range, RF spectrum IEEE standards, Wi-Fi 802.11a, 802.11b, 802.11g and 802.11n Wi-Fi Alliance tests devices from manufacturer Will work with other devices w/ same logo

17 802.11b 1999 2.4GHz 11Mbps 150ft range indoors 300 ft range outdoors

18 802.11a 1999 5GHz –Unused at that time –Less congestion 54Mbps (faster than B) NOT compatible with b/g/n 75ft-150ft range Originally too expensive Now hard to find

19 802.11g 2003 2.4GHz 54Mbps 150ft range indoors 300 ft range outdoors Compatible with 802.11b

20 802.11n In development 2.4Ghz Up to 750ft range Backwards compatible b/g

21 Wireless Components Access Point –Connects wireless devices to wired network Client –Any host device that connects to wireless –Also known as STA (station) Bridge Antenna

22 Omni-Directional Antenna Equally in all directions Found on APs

23 Directional Antenna Concentrate signal in one direction Better distance Connects networks 25 miles or more apart Bridge to Bridge- connects 2 networks wirelessly

24 Want a bridge? Aironet 1400 Find it on www.cdwg.comwww.cdwg.com

25 Activity

26 7.2.3 WLANs & the SSID 2 Forms of WLAN installations

27 SSID-Service Set Identifier Tells wireless devices which WLAN they belong to & which other devices they can communicate with Case-sensitive & up to 32 characters All of your devices MUST have same SSID –Broadcast or Not?

28 Ad-hoc Mode- IBSS Wireless devices can talk to each other without involving Access Point Peer-to-peer or small networks Less $$$, no AP

29 Infrastructure Mode- BSS Most used AP/Router controls communication –Access to Internet –Basic Service Set (BSS) Area covered by a single AP

30 Cover More Areas Connect many BSS’s to get expanded area –You get an ESS, Extended Service Set Areas should overlap –Think about this school & coverage

31 Question?

32

33

34

35 Lab Activity 7.2.3.4 READ THE INSTRUCTIONS!!! Click Topology, then the host View browser, follow directions

36 Wireless Channels Used to control multiple conversations –Like how all of your TV channels travel across a cable –Divides up the 2.4GHz for each conversation Selection of channels is usually automatic Sometimes they use a single wide channel to get more bandwidth

37 Going to a Concert General Admission compared to tickets for a seat –What’s the different experiences? Wireless has a method to avoid collisions A “ticketing” system

38 Wireless Detecting Collisions CSMA/CA Reserves a channel for conversation –No one else may use that channel Request to Send (RTS) to the AP If available, a Clear to Send (CTS) is sent –OK to send –Broadcast is sent to all, notifying channel in use ACK sent to AP to notify done –All devices see ACK & know channel is open

39 CSMA/CA- (7.2.4.2)

40 Activity- Setting the Channel 7.2.4.3

41 Configuring an AP

42 Configuring the Client What is a wireless host known as? –STA (station) It’s a device with wireless NIC & software for it Settings MUST match AP –SSID, security settings, and channel

43 Configuring the Client- Software As part of the OS OR supplied with Wireless NIC –Contains link info, profiles, etc. Usually the OS one is okay

44 Now Test It… Look at signal strength Then test data transmission –Use the ping test –Ping another PC 1 st –If that doesn’t work, ping the AP

45 Lab 7.2.5.3 & 7.2.6.4 Configure the AP and Wireless Client

46 Wireless Security Tradeoff: –Ease & convenience of availability vs. putting info to the airwaves What can they do? –Use your Internet for FREE –Access your computers –Damage files –Steal private info Solution…SET UP SECURITY!

47 Why is security important? It’s possible that an individual or a business owner can be held responsible for what an unauthorized user does with your network Computer Fraud Law –Accessing a computer without authorization

48 Which Security Measures?? Use all of the following to secure your wireless network: 1.Change the router password from the default 2.Change the SSID & disable the broadcast 3.Use MAC Address Filtering 4.Authentication (PSK) 5.Encryption (WPA)

49

50 Change the Password!

51

52 Change & Disable SSID SSID –Must be known to connect –Broadcast by default Solutions –TURN SSID BROADCAST OFF!! –Change the default settings SSID Passwords IP addresses –These solutions help, but you can still be hacked!

53 The SSID’s- Discovered!!!

54

55 Get your MAC Addresses

56 Set up MAC Address Filtering

57 MAC Address Filtering Use your device’s MAC address to limit connectivity to you KNOWN devices You pre-configure the MACs in the AP The AP will check its list Only those in list will connect

58 MAC Address Filtering What could go wrong? –Typo on the MAC address –New devices can’t enter network without adding Mac to the AP configuration –MAC address cloning 1.Sniff network traffic (MAC address in packet) 2.Find MAC addresses on that network 3.Change your MAC address to match one on the target network.

59 Sniffing to Clone

60

61 Authentication Permitting entry on WLAN based on credentials Used before connecting to the WLAN –Checks authentication 1 st –Then MAC address filtering 1.Open authentication (DEFAULT SETTING) 2.PSK (good)….THIS IS USED AT HOME. 3.EAP (better than PSK)…BUSINESSES.

62 Open Authentication Public networks

63 Pre-Shared Keys (PSK) Client & AP have secret word/keys One-way –Client authenticates to the AP –AP DOES NOT authenticate the user

64 Extensible Authentication Protocol- EAP Two-way PLUS user authentication Uses a separate server (RADIUS) –Built into some AP’s now –More for medium to large businesses The user provides a username & password

65 Overview

66 Configuring Auth & Encrypt WEP WPA Personal, uses PSK –TKIP (Temporal Key Integrity Protocol) –AES (Advanced Encryption System) WPA2 –TKIP or AES WPA Enterprise, RADIUS RADIUS AES is only supported by newer devices that contain a co-processor. –To ensure compatibility with all devices, select TKIP.

67 Problems Still??? Authentication & MAC filtering won’t stop the hacker –They can sniff the info from the air Encrypt the data –WEP –WPA

68 WEP- Wired Equivalency Protocol String of letters & numbers 64 or 128 bits Passphrase All devices in WLAN must have same WEP key Can work in conjunction with PSK –WEP-PSK WEAK!!!!! –Static key

69 WPA- Wi-Fi Protected Access Better than WEP 64-256 bits New keys for each time it connects

70 Review WEP/WPA _______________ the data. –Encrypt PSK/EAP are used to _____________ the user to the WLAN. –Authenticate WEP or WPA. Which is stronger? –WPA What’s the difference between open authentication & PSK? –PSK has the secret key

71 Activity 7.3.4 Configure authentication

72 Traffic Filtering You can control the type of data –Entering or leaving the AP –Going to/from a specific MAC or IP –Block by port #

73 Lab 7.3.5.2 Configuring Wireless Security

74 Planning the WLAN Determining the type of wireless standard to use Determining the most efficient layout of devices An installation and security plan A strategy for backing up and updating the firmware of the wireless devices.

75 Wireless Standard Bandwidth requirements, coverage areas, existing implementations, and cost. –This information is gathered by determining end-user requirements. Ask the following… –What throughput is actually required by the applications running on the network? –How many users will access the WLAN? –What is the necessary coverage area? –What is the existing network structure? –What is the budget?

76 Planning the WLAN Which 802.11 standards support a larger BSS? –Means less equipment to buy Is there an existing standard in use? Total Cost of Ownership (TCO) which includes the purchase of the equipment as well as installation and support costs

77 Installation of Devices Site Survey –Measurements –Consider interference sources & locations

78 Install & Secure the AP

79 Back It Up!!! 7.4.3.2 Activity Home & Small Business –Select Backup Configuration in Menu –To restore, select it –Factory Default Setting

80 Updating the Firmware The OS of the device is in firmware –Update for new features, etc 1.Get the current version 2.Research issues & features that may cause you to want the upgrade 3.Download it to a HD (directly connected machine) 4.Select Firmware upgrade DO NOT INTERRUPT THE PROCESS!

81 7.4.4.2 Activity Upgrade the firmware

82 Review

83 7: Wireless Technologies Networking for Home & Small Business


Download ppt "7: Wireless Technologies Networking for Home & Small Business."

Similar presentations


Ads by Google