1. © 2007 Cisco Systems, Inc. All rights reserved.Cisco Public ITE PC v4.0 Chapter 1 1 Wireless Technologies Networking for Home and Small Businesses – Chapter 7 Spring 2009 - Mr. Specter

2. 2 CCNA 1 - Chapter 7 - Mr. Specter Objectives:  Describe wireless technologies.  Describe the various components and structure of a WLAN  Describe wireless LAN security issues and mitigation strategies  Configure an integrated wireless access point and a wireless client.

3. 3 CCNA 1 - Chapter 7 - Mr. Specter Electromagnetic Frequencies  All use waves in the Electromagnetic spectrum to transfer information from device to device.  Electromagnetic spectrum includes bands used for radio, TV, and visible light.

4. 4 CCNA 1 - Chapter 7 - Mr. Specter Wireless Technologies  Infrared Band (IR) –Low energy and unable to penetrate walls (line of sight) Could this be a benefit? –Used for PDAs, PCs, wireless mice, keyboards and remote controls –IrDA (Infrared Direct Access) port used for 1 to 1 connections  Radio Frequency (RF) –Goes through walls and other obstructions, better range –Different frequencies assigned to different types of unlicensed devices (900MHz, 2.4GHz, 5GHz) Cordless Phones –Problem with 900MHz? –Used for military and civilian emergency bands outside US Wireless LANs Computer Peripherals Bluetooth uses 2.4 GHz band for low-speed, short-range, many devices at once

5. 5 CCNA 1 - Chapter 7 - Mr. Specter Wireless Technologies  Pros –Anytime, anywhere connectivity with hotspots –Easy and cheap installation –Device prices dropping –Data rate capabilities increasing –Easy expansion  Cons –Unlicensed RF which is crowded with other devices Bluetooth Microwaves Cordless phones –Security is difficult because there is no way to limit who can intercept the wireless signal Encryption helps, but can be defeated –Fluctuations in temperature and humidity can really affect transmission range.

6. 6 CCNA 1 - Chapter 7 - Mr. Specter Wireless Network Categories  Wireless networks are difficult to categorize because boundaries cannot be precisely defined.

7. 7 CCNA 1 - Chapter 7 - Mr. Specter Wireless Network Technologies  Technologies used for the different network types:

8. 8 CCNA 1 - Chapter 7 - Mr. Specter WLAN Standards  Many different standards have been adopted for wireless networks –IEEE 802.11n is latest standard adopted (except for 802.11y) –Wi-Fi Alliance tests devices from various manufacturers to make sure they operate together. ProtocolRelease Date RF Freq. Through put Data Rate (Max) Max Range Notes & Comments 802.11 19972.4 GHz0.9 Mbps2 MbpsUndefinedLegacy 802.11a 19995 GHz23 Mbps54 Mbps50m  Not compatible with b, g, n  Expensive 802.11b 19992.4 GHz4.3 Mbps11 Mbps100mFirst 2.4 GHz Technology 802.11g 20032.4 GHz19 Mbps54 Mbps100mBackward compatible with b Shares range with b 802.11n 2009 * 2.4 & 5 GHz 74 Mbps248 Mbps250mNewest Standard 802.11y 2008 * 3.7 GHz23 Mbps54 Mbps5000mNewest Standard

9. 9 CCNA 1 - Chapter 7 - Mr. Specter Structure of a WLAN  Wireless Components –Wireless Clients or STAs (Wireless STAtion) –APs (Access Points) –Wireless Bridges  Types of Antennas –Omni send all directions Used in APs –Directional send in one direction Used for longer links to bridge distances

10. 10 CCNA 1 - Chapter 7 - Mr. Specter WLAN Types  The Service Set Identifier (SSID) used by components to connect to a particular WLAN. –32-byte Alphanumeric String –Used in Frame Headers  Two forms of WLAN Installations –Ad-hoc - IBSS Equal Peer-to-peer No AP –Infrastructure - BSS STAs communicate through APs BSS is an area with a single AP

11. 11 CCNA 1 - Chapter 7 - Mr. Specter Wireless Channels  Channels are created by giving each a part of the RF spectrum –Each one can carry on a separate conversation (Think of a TV) –Can be set manually or automatically  Channels will often overlap frequencies, but conversations cannot overlap  Newer technologies combine channels into a wider one for better bandwidth

12. 12 CCNA 1 - Chapter 7 - Mr. Specter CSMA/CA  A WLAN technology designed to make collisions impossible  Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA). –Reserves a channel for use by a conversation –No other devices can transmit on that channel  CSMA/CA Reservation Process –For a Device to use a channel, it asks the AP by using a Request To Send (RTS) message. –If channel is not in use, AP will send Clear To Send (CTS) message to all devices in the BSS so they know the channel is being used. –Data is sent from STA –After conversation is done, an Acknowledgement (ACK) is transmitted.

13. 13 CCNA 1 - Chapter 7 - Mr. Specter Wireless Access Point Configuration  Integrated wireless access point –Network Mode 802.11b, g, or a different technology –SSID Name of your wireless network –Standard Channel Default is AUTO, but this decides which channel will be used –SSID Broadcast Sends out the SSID to the world Default is ENABLE

14. 14 CCNA 1 - Chapter 7 - Mr. Specter Wireless Client Configuration  Client software allows hardware to connect to the WLAN.  For connection to occur, the SSID, security settings, and channel must match the AP.  Wireless Utility Software usually comes with the NIC  Some features –Link Information: strength and quality of signal –Profiles: specify configuration options –Site Survey: checks for all WLANs in the area –To use the vendor software, Windows XP wireless software must be disabled.  For most purposes, XPs built-in wireless drivers can be used.

15. 15 CCNA 1 - Chapter 7 - Mr. Specter Wireless LAN Security Issues & Mitigation Strategies  One large benefit to Wireless networks is also biggest vulnerability: transmission of information through the air.  Attacks don’t need physical access to equipment, just be in range. –War Driving or Walking to discover insecure networks  If they gain access, an attacker can: –Use your Internet for free –Hack your computers or files  Special security protocols have been developed to protect networks, but there are simple steps as well. –Disable the SSID broadcast so that your network isn’t public. –Change your default settings IP Address Router Name Admin Password

16. 16 CCNA 1 - Chapter 7 - Mr. Specter Wireless LAN Security - MAC Address Filtering  Controls exactly which devices have access to the LAN  Uses MAC addresses to ID clients authorized to access WLAN.  Limitations: –MAC addresses for authorized clients must be input manually. –This makes adding new clients difficult –MAC Address cloning or spoofing can allow an unauthorized user to get into the WLAN.

17. 17 CCNA 1 - Chapter 7 - Mr. Specter Wireless LAN Security - Authentication  This process requires a client to present credentials in order to use the network.  Most common is a username and password, but for a wireless network, this is handled differently.  Because the transaction is wireless and can be “heard” by anyone, the authentication is done before connecting.  Three Types of Authentication: –Open Used for Public Networks Networks where another method of authentication is used. –PSK –EAP

18. 18 CCNA 1 - Chapter 7 - Mr. Specter Wireless LAN Security - Authentication  PSK (Pre-Shared Key) –Both client and AP are configured with a shared key –Password is encrypted by client using shared key, then sent to AP, where it is decrypted using the same key. –Doesn’t authenticate AP or User, only one way  EAP (Extensible Authentication Protocol) –Authentication is 2-way –Client communicates through AP to (usually) a RADIUS server which has list of authorized users and clients. –Both user and client must authenticate.

19. 19 CCNA 1 - Chapter 7 - Mr. Specter Wireless LAN Security – Data Encryption  Use of Wireless Authentication –Authentication can prevent unauthorized users from accessing WLAN, but data is still transmitted to anyone with a receiver. –Encryptions methods were developed to encrypt wireless communications to prevent snooping by outsiders.  Two main encryption methods: –WEP (Wired Equivalency Protocol) Uses pre-configured 64, 128, or 256 bit keys to encrypt data before transmission. WEP keys are just a string of letters or numbers and can also be automatically generated using a passphrase. WEP is not a secure protocol and can easily be cracked by a knowledgeable wireless hacker. –WPA (Wi-FI Protected Access) Also uses a 64 to 256 encryption key. WPA doesn’t always use the same key, but generates new, dynamic keys each time a client connects. WPA is considered the current standard of encryption for wireless networks.

20. 20 CCNA 1 - Chapter 7 - Mr. Specter Wireless LAN Security – Traffic Filtering  Allows control of traffic types sent across WLAN  Blocks undesirable traffic from entering or leaving network  Filtered using –MAC Addresses –IP Addresses –Port Numbers

21. 21 CCNA 1 - Chapter 7 - Mr. Specter Planning the WLAN  Planning a WLAN is important so that the administrator can determine –Wireless standard –Most Efficient Layout –Installation and Security –Backups for Devices  Standard Used is Affected by: –Number of users –Size of Area Covered –Current Network –Budget  Number of users –WLAN Bandwidth is shared between all users, so number of clients and APs matters.  Size of Area Covered –Different technology has different areas of coverage: –E.g. 2.4 GHz band used in 802.11 b/g/n has a great radius than the 5Ghz used in the 802.11a tech. –Larger BSS  Budget –Cost is always a factor –TCO (Total Cost of Ownership) must be considered for any installation –Size needed, existing equipment, interference of signal, etc. must all be considered during planning phase.

22. 22 CCNA 1 - Chapter 7 - Mr. Specter WLAN Security Measures  Security should be planned and configured before installing into network or ISP  Basic measures: –Change Defaults for SSID, usernames, and PWs –Disable SSID broadcast –MAC Address Filtering  Advanced Measures –WPA or WEP Encryption –Authentication –Traffic Filtering

23. 23 CCNA 1 - Chapter 7 - Mr. Specter Backup and Restoring AP Configurations  Configuration files for APs are stored in their non-volatile memory  Any stored memory can be corrupted, so it’s important to backup the configuration in case of problems.  Backup –Save the configuration file to a secure location  Restore –Use the restore button to upload the file to the AP  Setting to Factory Default –Menu option –Hold RESET button for up to 30 seconds.

24. 24 CCNA 1 - Chapter 7 - Mr. Specter Updating Firmware  Firmware is a basic OS for the AP or Router stored in flash memory  Can be updated using the GUI on the AP/Router –Download from manufacturer’s website –Make sure to check version currently being used  NEVER interrupt an update while it is being uploaded, it may make the AP/Router unusable.

25. 25 CCNA 1 - Chapter 7 - Mr. Specter Summary  Wireless technologies use electromagnetic radiation in the form of radio signals to carry information between devices.  Ease and convenience of connecting devices wirelessly creates security concerns that need to be addressed.  Before installing wireless devices, an installation plan should be created which includes strategies for layout and security.

26. 26 CCNA 1 - Chapter 7 - Mr. Specter