정보보호기술연구본부 “Internet Security” Chapter 1

P.2 Contents 1. Internetworking and Layered Models 1.1 Networking Technology - LANs, WANs 1.2 Connecting Devices - Switches, Repeaters, Bridges, Routers, Gateways 1.3 The OSI Model 1.4 TCP/IP Model - Network Access Layer - Internet Layer - Transport Layer - Application Layer

P.3 Networking Technology ▣ Local Area Networks (LANs) ◈ Ethernet ◈ Token Ring ◈ Fiber Distributed Data Interface (FDDI)

P.4 Networking Technology ▣ Ethernet ◈ A LAN standard originally developed by Xerox and later extended by a joint venture between DEC, Intel and Xerox ◈ The access mechanism used in an Ethernet CSMA/CD Ethernet Frame Format Ethernet Frame Format

P.5 Networking Technology ▣ CSMA/CD ◈ Carrier Sense Multiple Access/Collision Detection ◈ As indicated by CSMA name, the Ethernet is a multiple access network ( a set of nodes send and receive frames over a shared link) ◈ “carrier sense” in CSMA/CD means that all node can distinguish between an idle and a busy link ◈ “collision detection” means a node listens as it transmit and can detect when a frame it is transmitting has interfered (collided) with a frame transmitted by another node

P.6 Networking Technology ▣ Token Ring ◈ A LAN standard originally developed by IBM, uses a logical ring topology ◈ Access method The token is passed from station to station in sequence until it encounters a station with data to send

P.7 Networking Technology ▣ FDDI ◈ A LAN protocol standard by ANSI and ITU-T American National Standard Institute International Telecommunications Union - Telecommunication Standardization Sector ◈ Access method Token passing If a station receives the token earlier than the designed time, it can keep the token and send data until the scheduled leaving time

P.8 Networking Technology ▣ Wide Area Networks (WANs) ◈ Point-to-Point Protocol (PPP) ◈ X.25 ◈ Frame Relay ◈ Asynchronous Transfer Mode (ATM)

P.9 Networking Technology ▣ PPP ◈ Designed to handle the transfer of data using either asynchronous modem links or high-speed synchronous leased lines ◈ PPP frame format Flag field Address field Control field Protocol field Data field CRC

P.10 Networking Technology ▣ X.25 ◈ Used as the packet switching protocol provided for use in a WAN ◈ Developed by the ITU-T in 1976 ◈ Defines how a packet mode terminal can be connected to a packet network for exchange of data ◈ Describes the procedures necessary for establishing connection, data exchange, acknowledgement, flow and data control

P.11 Networking Technology ▣ X.25 hierarchy

P.12 Networking Technology ▣ Frame Relay ◈ A WAN protocol designed in response to X.25 deficiencies Extensive error-checking and flow control ◈ Each station keeps a copy of the original frame until it receives confirmation from the next station that the frame has arrived intact In FR, Station-to-Station checking is implemented at the data link layer X.25 only checks for error from source to destination at the network layer X.25Frame Relay packetframe 2.4Kbps – 56Kbps9.9Kbps – E1 Node to NodeEnd to End 1,2,3 Layers1,2 Layers Transmission Unit Subscriber speed Error Processing OSI Layer Comparison of X.25 and Frame Relay

P.13 Networking Technology ▣ ATM ◈ Designed to support the transmission of data, voice and video through a high data-rate transmission medium such as fiber-optic cable ◈ A protocol for transferring cells Cell (53 bytes) = Header (5 bytes) + Payload (48 bytes) Header = VPI (Virtual Path Identifier) + VCI (Virtual Channel Identifier)

P.14 Connecting Devices ▣ Five categories ◈ Switches, repeaters, bridges, routers and gateways ◈ Each of these devices excepts the first one (switches) interacts with protocols at different layers of the OSI model Application (L7) Presentation (L6) Session (L5) Transport (L4) Network (L3) Data link (L2) Physical (L1) Gateway Repeater Bridge Repeater Connecting Device

P.15 Connecting Devices ▣ Switches ◈ Hardware/software device capable of creating temporary connections between two or more devices to the switch but not to each other ◈ Switching mechanism are generally classified into three method : Circuit switching Creates a direct physical connection between two devices such as telephones Once a connection is made between two systems, circuit switching creates a dedicated path between two end users Packet switching Data are transmitted in discrete units of variable-length blocks called packets The packet are sent over the network node to node. At each node, the packet is stored briefly before being routed according to the information on its header Message switching Known as the store and forwarding method

P.16 Connecting Devices ▣ Repeaters ◈ An electronic device that operates on the physical layer of the OSI model ◈ Boosts the transmission signal from one segment and continues the signal to another segment ◈ Allows us to extend the physical length of a network A repeater receives the signal before attenuation, regenerates the original bit pattern and puts the restored copy back on to the link repeater

P.17 Connecting Devices ▣ Bridges ◈ Operate in both the physical and the data link layers of the OSI model ◈ A bridge can access the physical addresses of all stations connected to it ◈ When a frame enters a bridge, the bridge not only regenerates the signal but also checks the address of the destination and forwards the new copy to the segment to which the address belongs Bridge Segment 1 Segment 2

P.18 Connecting Devices ▣ Routers ◈ Operate in the physical, data link and network layers of the OSI model ◈ The Internet is a combination of networks connected by routers An IP router forwards IP datagrams among the networks to which it connects

P.19 Connecting Devices ▣ Gateways ◈ Operate over the entire range in all seven layers of the OSI model ◈ Internet routing devices ◈ Provides translation services between incompatible LANs or application Protocol converter which connects two or more heterogeneous system and translates among them

P.20 The OSI Model ▣ History ◈ The design of Ethernet preceded the development of the seven-layer OSI model ◈ The Open System Interconnection (OSI) model was developed and published in 1982 by the International Organization for Standard (ISO) as a generic model for data communication ◈ The OSI reference model specifies the seven layers of functionality Shown in Figure 1.2

P.21 The OSI Model ▣ Physical Layer ◈ Provides the interface with physical media Interface : mechanical connection from the device to physical medium used to transmit the digital bit stream ◈ Responsible for converting the digital data into a bit stream for transmission over the network ◈ Includes the method of connection used between the network cable and the network adapter ( ) …… …..

P.22 The OSI Model ▣ Data link Layer ◈ Represents the basic communication link that exists between computers ◈ Responsible for sending/receiving frames or packets of data without errors ◈ Manages transmission, error acknowledgement and recovery When a packet of data is received incorrectly, the data link layer makes system send the data again. ◈ Defined in IEEE logical link control specifications ◈ Data link control protocols High-level Data Link Control (HDLC) Advanced Data Communication Control Procedures (ADCCP) Link Access Procedure, Balanced (LAP-B)

P.23 The OSI Model ▣ Network Layer ◈ Responsible for data transmission across networks ◈ Handles the routing of data between computers ◈ Translates logical network addressing into physical address and manages issues such as frame fragmentation and traffic control ◈ Examines the destination address and determines the link to be used to reach that destination ◈ The Internet Protocol (IP) runs at this layer source destination

P.24 The OSI Model ▣ Transport Layer ◈ Responsible for ensuring that message are delivered error-free and in the correct sequence ◈ Splits messages into smaller segments if necessary and provides network traffic control of messages ◈ Traffic Control When data is received, a certain amount of processing must take place before the buffer is clear and ready to receive more data. In the absence of flow control, the receiver’s buffer may overflow while it is processing old data abcdef.. buffer abcdef …

P.25 The OSI Model ▣ Session Layer ◈ Controls the network connection between the computers in the network ◈ Recognizes nodes on the LAN and sets up tables of source and destination addresses ◈ Responsible for session connection(I.e. for creating, terminating and maintaining network sessions), exception reporting, etc.

P.26 The OSI Model ▣ Presentation Layer ◈ Responsible for the data format, which includes the task of hashing the data to reduce the number of bits (hash code) that will be transferred ◈ Transfers information from the application software to the network session layer to the operating system ◈ Translates data from application layer into the format used when transmitting across network ◈ On the receiving end, this layer translates the data back into a format that the application layer can understand

P.27 The OSI Model ▣ Application Layer ◈ Highest layer defined in the OSI model ◈ Responsible for providing user-layer applications and network management functions Supporting file service, print service, remote login and

P.28 TCP/IP Model ▣ TCP/IP four layer model ◈ created with reference to the seven layer OSI model ◈ Figure 1.3 OSI model (7 layers) TCP/IP model (4 layers) Application Presentation Session Transport Network Data link Physical } } } } Application Transport Internet Network Access Internet Protocol suite HTTP, FTP, TFTP, NFS, etc. TCP, UDP IP, ICMP, IGMP, ARP, RARP Ethernet, token ring, FDDI PPP, X.25, frame relay, ATM The TCP/IP model and Internet protocol suite

P.29 TCP/IP Model ▣ Network Access Layer ◈ Contains protocols that provide access to a communication network Ethernet, Token Ring, FDDI, PPP, etc. ◈ One function is to route data between hosts attached to the same network ◈ Provides the device drivers that support interactions with communications hardware such as the token ring or Ethernet Ethernet or token ring

P.30 TCP/IP Model ▣ Internet Layer ◈ Provides Routing function ◈ Allows data to traverse multiple networks ◈ Consists of the Internet Protocol (IP) and the Internet Control Message Protocol (ICMP)

P.31 TCP/IP Model ▣ Transport Layer ◈ Delivers data between two processes in different host computers ◈ Provides a logical connection between higher-level entities |__________| ◈ Contains the Transmission Control Protocol (TCP) and the User Datagram Protocol (UDP)

P.32 TCP/IP Model ▣ Application Layer ◈ Contains protocols for resource sharing and remote access ◈ Represents the higher-level protocols that are used to provide a direct interface with users or applications FTP(File Transfer Protocol) HTTP(Hyper-Text Transfer Protocol) SNMP(Simple Network Management Protocol) DNS(Domain Name Service) SMPT(Simple Mail Transport Protocol) POP(Post Office Protocol) …