Camomile – Downwind Sailing

Slides:



Advertisements
Similar presentations
{ LEARN TO SAIL Sailing Language University of Kansas Sailing Club Spring 2013.
Advertisements

Sail technology and trim
Blue Water & Heavy Weather Sailing Fun and Adventure.
Sail Trim and Shape Nick Turney.
Knuckle joint Applications: Elevator chains, valve rods, etc
Sailing – A Beginners Guide
Forestay Topping Lift Painter Mast Boom Tiller Shroud Tabernacle Centerboard Starboard Port Boomvang Winch.
Types of Screw.
FVSPS Sail Course, Class 2. What Are We Doing Today? OTW Preliminaries (Do NOW): - Briefing - Sign-ups In Class Schedule: - Questions/Clarification, Sail.
Presented by Dave Riddle. Directions Aft: Towards the back of the boat Port: The left side of the boat when facing forward Starboard: The right side of.
860 21/2”-10”. Modification Overview  Production of the 2½” – 10 sizes began in  Lead free version (LF860) was introduced in Parts do not.
Boating Skills And Seamanship 1 Copyright Coast Guard Auxiliary Association, Inc. Lines And Knots For Your Boat Chapter 11.
Seamanship Chapter 8 Marlinspike.
® Seamanship Chapter 8 Marlinespike. ® Slide 2 of 35USPS® Seamanship Learning Objectives  Marlinespike seamanship encompasses the art and science of.
Proof Coil Chain A welded link chain. Chain size is designated by the diameter of the steel used in making the links (e.g.. 3/16"-3/4"). Made from low.
SABOT Standardized Auxiliary Boat Operations Training Ninth District - Eastern Region COMO. Lew Wargo, Sr. DSO-OP/CQEC 03 APR 2015 MARLINESPIKE.
Tonight’s Goals: Quick Review Parts of the Boat Points of Sail Sail Controls Spinnaker Video Racing Intro Knots.
. By Andrew kerr Sail Trim, Tactics & Boat Handling for Speed By Andrew Kerr.
Trim For Control “Proper Sail Trim is all about balance. All boats will go faster, be more comfortable to sail and will handle more easily when sailing.
Islander 36 Fleet San Francisco Bay
The Physics of Sailing Ashley Conklin. Basic Parts of a Sailboat Mainsail- catches wind Jib- helps with turning the boat and also catches some wind Mast-
1 Hose and Lines. 2 High side / low side System with an expansion valve High SideLow Side Condenser Evaporator Receiver/Drier Compressor Expansion valve.
TRACK FITTINGS AND FASTENINGS
Lathe Boring Machining process to finish existing holes to exact size (rough cast holes or previously machined) Assures accuracy of hole location (concentricity)
Asymmetric Sailing Some secrets Andy Howard Llandegfedd Sailing Club.
Chapter 11: Miscellaneous Types of fasteners
The Basics of Victory Sailing I
FVSPS Sail Course, Class 4. Today’s OTW Weather Outlook Boats Going Out Sign-Up Sheet.
Learn To Sail Lesson Plans. What to wear / what to bring? comfortable clothes (layers) + extra dry ball cap / sunglasses boat shoes (sandals NOT recommended)
Fasteners, Load and Stress. Loads Load is an engineering term for the forces that are exerted on a structure. Loads are considered either static or dynamic:
14/2010 CHAPTER 4. Line Construction Braided Line Laid Line Webbing Reprinted with permission from Knots, Slices and Line Handling: A Captain ’ s Quick.
FVSPS Sail Course, Class 7. Today’s OTW Weather Outlook Boats Going Out Sign-Up Sheet.
FVSPS Sail Course, Class 2. What Are We Doing Today? OTW Preliminaries: - Briefing - Sign-ups In Class Schedule: - Me, Basic Sailing Concepts, Procedures.
Introduction to Sailing, Class 3
FVSPS Sail Course, Class 6. What Are We Doing Today? In Class Today: - 10:00 OTW Today Briefing (Brian) - 10:10 Last Week’s OTW, Discuss (Brian) - 10:20.
FVSPS Sail Course, Class 3. Today’s OTW Weather Outlook Boats Going Out Sign-Up Sheet.
Sail Course ® Part 2, Forces Section 11, Preparing to Sail.
ORD-6 OrdinaryMarlinspike Instructors: George Crowl.
Types of Screw. Mirror screw This is a flat-head wood screw with a tapped hole in the head, which receives a screw-in chrome-plated cover. It is usually.
WeldFit Push-in Fittings
GSA Cruiser Qualification Course
Sail Course ® Section 10, Sail Shape. Sail Course ® Figure 10–1 Air Flow Around a Sail.
COMMITTEE WORK THIS IS 6/1/10 DRAFT 1 VERSION OF CRAIG’S SLIDES—FOR DISCUSSION AT 6/3 COMMITTEE CALL Have.ppt professional go through entire show and standardize.
FVSPS Sail Course, Class 3
Mainsail Trim “Trim the front of the Jib and the back of the main” Trim cycle 1) Twist 2) Depth 3) Draft position 4) Helm balance.
Section 6, Running Rigging
Dimension of Mainsail After you filled in all dimensions , You could press Ctrl+Alt+A together to make Print Screen , and send us the files by .
Knots and Splices Toronto Brigantine Grade II Most of the images in this lecture are from the following eBook (copyright expired) Knots, Splices and Ropework.
Sail Course ® Section 20, Marlinespike Seamanship.
The following slides show a few key aspects of the rig setup for the feva (with some comments)
FVSPS Sail Course, Class 3. What Are We Doing Today? Today’s OTW, Briefing, Sign-Ups In Class Today: - Me, Prior OTW, Discuss - Me, Basic Sailing Concepts,
Mainsail Trim “Trim the front of the Jib and the back of the main” Trim cycle 1) Twist 2) Depth 3) Draft position 4) Helm balance.
Sail Trim for Cruisers Presented by.
*Turning the Boat with the Bow Crossing the No-Go-Zone
Goddard Sailing Association Hunter 27 Cruiser Qualification Course 1.
Sail Course ® Sail Course Slides Section 6, Running Rigging.
Types of Welds and Welded Joints.
FVSPS Sail Course, Class 5
Section 14, Sailing Upwind
General Seamanship.
SAILPLAN FREEDOM35 G10 STYLE
Section 5, Sails.
Derigging a CL16.
Chapter 1 Stress and Strain.
Building Construction I Sofia Sebastian 1
Proof Coil Chain Rope and Chain-Chains, Lashing Straps, and Accessories Image: ChainProofCoil.jpg Height: 46.2 Width: 120 A welded link chain. Chain.
Rigging a CL16.
880V 21/2”-10”.
FS ” Maximum Blade Capacity 9 HP Honda engine Weight – 141Lbs
Oppy Regional /12/2018.
Presentation transcript:

Camomile – Downwind Sailing

The Twizzle Rig Twin 135% “heavy” headsails on one foil 80mm diameter aluminum “whisker” poles Standard outer end modified inner end Twizzle joint free of mast held by uphaul & downhaul Damped roll input from sails & reduced cross loading Runs off the wind by up to 40 degrees Sail reefs on one line for fast squall dousing Sails usable from 10kts true through to heavy weather. Sails can be flown paired to leeward without removal from the foil

Poles rigged ready to deploy

Deploying

Basic rig deployed

Long passage rig with lazy sheets

Running off the wind

Deep reefed for running before heavy weather

Ready to stow poles

Poles stowed on rails

Poles stowed on rails

Poles stowed on rails

Twin headsails to leeward

Haul leeward sheet

Over-haul leeward sheet

Tension twin headsails to leeward Nip sails tight together by cleating lazy sheet and easing leeward sheet

The Key Components

The Key Components 135% Genoa Lazy sheet Roller reefing line Uphaul Furling winch Sheet winches Roller furler Mast Cleats Downhaul Twizzle joint Lazy sheet Pole 135% Genoa Outhaul Port sheet Clew

The Key Components 135% Genoa Roller reefing line Furling winch Uphaul Sheet winches Mast Cleats Downhaul Roller furler Twizzle joint Lazy sheet Pole 135% Genoa Outhaul Port sheet Clew

Sheets 14mm braid on braid polyester made off at clew with a bowline 135% Genoa Lazy sheet Roller reefing line Sheets Uphaul Furling winch Sheet winches Mast Cleats Downhaul Roller furler Twizzle joint Lazy sheet Pole 135% Genoa Outhaul Port sheet 14mm braid on braid polyester made off at clew with a bowline Double car on side deck Clew

Sheets 14mm braid on braid polyester made off at clew with a bowline 135% Genoa Lazy sheet Roller reefing line Sheets Uphaul Furling winch Sheet winches Mast Cleats Downhaul Roller furler Twizzle joint Lazy sheet Pole 135% Genoa Outhaul Port sheet 14mm braid on braid polyester made off at clew with a bowline Double car on side deck Clew

Lines Up & downhauls 12mm with snap shackles 135% Genoa Lazy sheet Roller reefing line Lines Uphaul Furling winch Sheet winches Mast Cleats Downhaul Roller furler Twizzle joint Lazy sheet Pole 135% Genoa Outhaul Port sheet Up & downhauls 12mm with snap shackles Outhaul 10mm with small soft eye to make pole to pull right into clew & avoid chafe. Length 2x pole Clew

Lines Up & downhauls 12mm with snap shackles Outhaul 10mm with small soft eye to make pole to pull right into clew & avoid chafe. Length 2x pole

Lines Up & downhauls 12mm with snap shackles Outhaul 10mm with small soft eye to make pole to pull right into clew & avoid chafe. Length 2x pole

Lines Up & downhauls 12mm with snap shackles Outhaul 10mm with small soft eye to make pole to pull right into clew & avoid chafe. Length 2x pole

Lines Up & downhauls 12mm with snap shackles Outhaul 10mm with small soft eye to make pole to pull right into clew & avoid chafe. Length 2x pole

Lines Up & downhauls 12mm with snap shackles Outhaul 10mm with small soft eye to make pole to pull right into clew & avoid chafe. Length 2x pole

Lines Up & downhauls 12mm with snap shackles Outhaul 10mm with small soft eye to make pole to pull right into clew & avoid chafe. Length 2x pole

135% Genoa Lazy sheet Roller reefing line Sails Uphaul Furling winch Sheet winches Mast Cleats Downhaul Roller furler Twizzle joint Lazy sheet Pole 135% Genoa Outhaul Port sheet 2 cruising weight Dacron 135% high cut genoas fed into common foil with twin grooves. Adapted sacrificial strip & metal ring clews to avoid chafe against poles. Clew

Sails 2 cruising weight Dacron 135% high cut genoas fed into common foil with twin grooves. Adapted sacrificial strip & metal ring clews to avoid chafe against poles.

135% Genoa Lazy sheet Roller reefing line Poles Uphaul Furling winch Sheet winches Mast Cleats Downhaul Roller furler Twizzle joint Lazy sheet Pole 135% Genoa Outhaul Port sheet 80mm dia. Rigid poles. Standard outer end, modified Harken inner end to take and lock shaft of Twizzle joint. Side mounted cleat to make off outhaul. Clew

Poles 80mm dia. Poles. Standard outer end, modified Harken inner end to take and lock shaft of Twizzle joint. Side mounted cleat to make off outhaul.

Pole Length 2’ overhang is manageable baby stay As long as possible up to the length of the mitre however this may leave too much overhanging the clew when furled right in and be a problem for stowage/handling

135% Genoa Lazy sheet Roller reefing line Furler Uphaul Furling winch Sheet winches Mast Cleats Downhaul Roller furler Twizzle joint Lazy sheet Pole 135% Genoa Outhaul Port sheet Furlex 300s roller reefing with 10mm braid on braid polyester line leading to a small self tailing winch. Foil has twin luff groove to take two sails Clew

Furler Furlex 300s roller reefing with 10mm braid on braid polyester line leading to a small self tailing winch. Foil has twin luff groove to take two sails

135% Genoa Lazy sheet Roller reefing line Cleats Uphaul Furling winch Sheet winches Mast Cleats Downhaul Roller furler Twizzle joint Lazy sheet Pole 135% Genoa Outhaul Port sheet Lazy sheet takes small loads as it is used only to compress the two sails together. Sheet winch should be tensioned to do the real work Clew

135% Genoa Lazy sheet Roller reefing line Cleats Uphaul Furling winch Sheet winches Mast Cleats Downhaul Roller furler Twizzle joint Lazy sheet Pole 135% Genoa Outhaul Port sheet Lazy lines takes small loads as it is used only to compress the two sails together. Sheet winch should be tensioned to do the real work Clew

135% Genoa Lazy sheet Roller reefing line Twizzle joint Uphaul Furling winch Sheet winches Mast Cleats Downhaul Roller furler Twizzle joint Lazy sheet Pole 135% Genoa Outhaul Port sheet Made from off the shelf 316 parts and a weld to a 16mm diameter bar with a groove in it.No excessive loads present and bar resists chafe well. Clew

Twizzle joint 135% Genoa Made from off the shelf 316 parts and a weld to a 16mm diameter bar with a groove in it.No excessive loads present and bar resists chafe well.

Camomile – Downwind Sailing

Camomile – Downwind Sailing Twizzle used for Atlantic and Pacific crossings 2009/10

Camomile – Downwind Sailing Twizzle used for Atlantic and Pacific crossings 2009/10 So far so good