Acids and Bases Chapter 15 Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.

Properties of: AcidsBases 1.Sour taste 2.Conducts electricity 3.Turns litmus paper red 4.Reacts with bases to produce salts and water 5.Reacts with some metals and releases hydrogen gas o Can you think of a reaction that this occurs? 6. React with carbonates to form carbon dioxide 1.Bitter taste 2.Feels slippery 3.Conducts electric current 4.Turns litmus paper blue 5.Reacts with acids to produce salts and water

Binary Acids Contains only two different elements –Hydrogen and an electronegative element (usually a halogen) Nomenclature: hydro - _________ - ic acid REVIEW ACID NAMING!!!

Binary Nomenclature

Oxyacid Contains hydrogen, oxygen, and a third element (hydrogen with a polyatomic ion) Nomenclature:

Polyprotic Acids Monoprotic: –Donates 1 proton –Example: Diprotic: –Donates 2 protons –Example: Triprotic: –Donates 3 protons –Example:

STRONG ACIDS AND BASES AND DEFINITIONS

Strength of Acids and Bases Strong Acids HCl HBr HI HNO 3 H 2 SO 4 HClO 4 HClO 3 Strong Bases NaOH KOH RbOH CsOH Ca(OH) 2 Sr(OH) 2 Ba(OH) 2 MEMORIZE THESE!

Strong Acids and Bases are strong electrolytes Weak Acids and Bases are weak electrolytes HNO 3 (aq) + H 2 O (l) H 3 O + (aq) + NO 3 - (aq) HF (aq) + H 2 O (l) H 3 O + (aq) + F - (aq) KOH (s) K + (aq) + OH - (aq) H2OH2O NO 2 - (aq) + H 2 O (l) OH - (aq) + HNO 2 (aq)

Arrhenius Definition Arrhenius Acid: –Substance that produces H + (H 3 O + ) in water Arrhenius Base: –Substance that produces OH - in water

Acid example But, NH 3 is a base and does not have (OH - )!

Bronsted-Lowry Definition Bronsted-Lowry Acid: –Proton donor Bronsted-Lowry Base: –Proton acceptor Forms conjugate acid-base pairs

acid is a proton donor base is a proton acceptor acidbase conjugate base conjugate acid

Conjugate Acid-Base Pairs and Strengths H 3 O + is the strongest acid that can exist in aqueous solution. The OH - ion is the strongest base that can exist in aqueous solution. The stronger the acid, the weaker the conjugate base. The stronger the base, the weaker the conjugate acid.

ACID STRENGTH

Acid Strength Acid Strength depends on how easily you can produce H + ions H X H + + X -

H X H + + X - The bigger X is, the weaker the HX bond is HF << HCl < HBr < HI Binary Acid Strength DOWN a Group Then the stronger the acid!

H X H + + X - The greater electronegativity of X, the more polar the HX bond, the easier to break the HX bond H 3 P < H 2 S << HCl Binary Acid Strength ACROSS a Period Then the stronger the acid!

Z O HZ O-O- + H + -- ++ Depends on: Electronegaitivity of “Z” Number of oxygens (oxidation state) on “Z” Oxyacid Strength

Oxyacids having different central atoms (Z) and that have the same number of oxygens. Acid strength increases with increasing electronegativity of Z H O Cl O O H O Br O O Cl is more electronegative than Br HClO 3 > HBrO 3 1. Electronegativity

Oxyacids having the same central atom (Z) but different number of oxygen atoms. Acid strength increases with the number oxygen atoms around Z. HClO 4 > HClO 3 > HClO 2 > HClO 2. Oxidation Numbers The more oxygens = stronger acid

Polyprotic Acids The strength of a polyprotic acid and its anions decreases with increasing negative charge. Increasing negative charge makes it more difficult to release H +. Increase # of H’s = stronger acid H 3 PO 4 › H 2 PO 4 - › HPO 4 2-

TYPES OF SALTS

Neutral Solutions: Salts containing an alkali metal or alkaline earth metal ion (except Be 2+ ) and the conjugate base of a strong acid (e.g. Cl -, Br -, and NO 3 - ). NaCl (s) Na + (aq) + Cl - (aq) H2OH2O Neutral Salts Comes from a strong base (NaOH) Comes from a strong acid (HCl)

Basic Salts Basic Solutions: Salts derived from a strong base and a weak acid. NaC 2 H 3 O 2 (s) Na + (aq) + C 2 H 3 O 2 - (aq) H2OH2O Comes from a strong base (NaOH) Comes from a weak acid (HC 2 H 3 O 2 )

Acid Solutions: Salts derived from a strong acid and a weak base. NH 4 Cl (s) NH 4 + (aq) + Cl - (aq) H2OH2O Acidic Salts Comes from a weak base (NH 3 ) Comes from a strong acid (HCl)

Solutions of weak acid and weak base combos: K b for the anion > K a for the cation, solution will be basic K b for the anion < K a for the cation, solution will be acidic K b for the anion  K a for the cation, solution will be neutral

Basic Oxides React with water to form a base Na 2 O (s) 2 NaOH(aq) H2OH2O React with acids to produce salt and water (like a neutralization reaction!) MgO (s) + 2 HCl MgCl 2 + H 2 O (aq)

Amphoteric Oxides React with acids to produce salt and water Al 2 O 3 (s) + 6 HCl (aq) 2 AlCl 3 (aq) + 3 H 2 O (l) React with bases to produce salt Al 2 O 3 (s) + 2 NaOH (aq) + 3 H 2 O (l) 2 Na Al(OH) 4 (aq)

Acidic Oxides React with water to form acids: SO 3 + H 2 O  H 2 SO 4 React with strong bases to produce salt and water: SiO 2 (s) + 2 NaOH Na 2 SiO 3 (aq)+ H 2 O (l)

Oxides Summary Basic OxidesMetallic elements Amphoteric OxidesIntermediate elements Acidic OxidesNonmetallic elements Note: There are some exceptions but you will not be responsible for knowing these

H+H+ H O H + OH - acidbase N H H H H+H+ + acidbase N H H H H + Lewis Acid and Base Lewis Acid: –Substance that can accept a pair of electrons Lewis Base: –Substance that can donate a pair of electrons

Lewis Acids and Bases N H H H acidbase F B F F + F F N H H H No protons donated or accepted! 15.12

Acid and Base Definitions

PH CALCULATIONS

O H H+ O H H O H HH O H - + [] + H 2 O (l) H + (aq) + OH - (aq) H 2 O + H 2 O H 3 O + + OH - acid conjugate base base conjugate acid autoionization of water Water is Amphoteric acts as both an acid and a base

H 2 O (l) H + (aq) + OH - (aq) K c = [H + ][OH - ] [H 2 O] [H 2 O] = constant K c = K w = [H + ][OH - ] ion-product constant (K w ): product of the molar concentrations of H + and OH - ions at a particular temperature. At 25 0 C K w = [H + ][OH - ] = 1.0 x Ion Product Constant of Water

What is the concentration of OH - ions in a HCl solution whose hydrogen ion concentration is 1.3 M? K w = [H + ][OH - ] = 1.0 x [H + ] = 1.3 M [OH - ] = KwKw [H + ] 1 x = = 7.7 x M Given: Solution:

Calculating pH pH = - log [H + ] [H + ] = [OH - ] [H + ] > [OH - ] [H + ] < [OH - ] Solution Is neutral acidic basic [H + ] = 1 x [H + ] > 1 x [H + ] < 1 x pH = 7 pH < 7 pH > 7 At 25 0 C pH[H + ] 15.3

Significant Figures There must be as many significant figures to the right of the decimal as there are in the number whose logarithm was found. –Example: [H 3 O + ] = 1 × 10 −7 one significant figure pH = 7.0

pOH = −log [OH – ] pH + pOH = 14.0 Calculating pOH

The pH of rainwater collected in a certain region of the northeastern United States on a particular day was What is the H + ion concentration of the rainwater? pH = - log [H + ] [H + ] = 10 -pH = = 1.5 x M The OH - ion concentration of a blood sample is 2.5 x M. What is the pH of the blood? pH + pOH = pOH = -log [OH - ]= -log (2.5 x )= 6.60 pH = – pOH = – 6.60 = 7.40

The Circle of pH pH pOH [ H 3 O + ] [ OH - ] -log [H 3 O + ] antilog (-pH) antilog (-pOH) -log [OH - ] [ H 3 O + ] [ OH - ] = pH+ pOH = 14

What is the pH of a 2 x M HNO 3 solution? HNO 3 is a strong acid – 100% dissociation. HNO 3 (aq) + H 2 O (l) H 3 O + (aq) + NO 3 - (aq) pH = -log [H + ] = -log [H 3 O + ] = -log(0.002) = 2.7 Start End M 0.0 M

What is the pH of a 1.8 x M Ba(OH) 2 solution? Ba(OH) 2 is a strong base – 100% dissociation. Ba(OH) 2 (s) Ba 2+ (aq) + 2OH - (aq) Start End M M0.0 M pH = – pOH = log(0.036) = 12.56

HA (aq) + H 2 O (l) H 3 O + (aq) + A - (aq) HA (aq) H + (aq) + A - (aq) K a = [H + ][A - ] [HA] K a = acid ionization constant KaKa weak acid strength Weak Acids (HA) and Acid Ionization Constants

What is the pH of a 0.5 M HF solution (at 25 0 C)? HF (aq) H + (aq) + F - (aq) K a = [H + ][F - ] [HF] = 7.1 x HF (aq) H + (aq) + F - (aq) Initial (M) Change (M) Equilibrium (M) x-x+x+x x x+x xx

What is the pH of a 0.5 M HF solution (at 25 0 C)? Continued… K a = x2x x = 7.1 x Ka  Ka  x2x = 7.1 x – x  0.50 K a << 1 x 2 = 3.55 x x = M [H + ] = [F - ] = M pH = -log [H + ] = 1.72 [HF] = 0.50 – x = 0.48 M

0.50 – x  0.50 K a << 1 When x is less than 5% of the value from which it is subtracted. x = M 0.50 M x 100% = 3.8% Less than 5% Approximation ok. When can I use the approximation? Percent ionization = [H + ] [HA] 0 x 100% [HA] 0 = initial concentration To calculate percent ionization:

Does the approximation always work? What is the pH of a 0.05 M HF solution (at 25 0 C)? Ka  Ka  x2x = 7.1 x x = M M 0.05 M x 100% = 12% More than 5% Approximation not ok. Must solve for x exactly using quadratic equation or method of successive approximation.

Solving weak acid ionization problems: 1.Identify the major species that can affect the pH. In most cases, you can ignore the autoionization of water. Ignore [OH - ] because it is determined by [H + ]. 2.Use ICE to express the equilibrium concentrations in terms of single unknown x. 3.Write K a in terms of equilibrium concentrations. Solve for x by the approximation method. If approximation is not valid, solve for x exactly. 4.Calculate concentrations of all species and/or pH of the solution.

What is the pH of a M monoprotic acid whose K a is 5.7 x ? HA (aq) H + (aq) + A - (aq) Initial (M) Change (M) Equilibrium (M) x-x+x+x x x+x xx K a = x2x x = 5.7 x Ka  Ka  x2x = 5.7 x – x  K a << 1 x 2 = 6.95 x x = M M M x 100% = 6.8% More than 5% Approximation not ok.

K a = x2x x = 5.7 x x x – 6.95 x = 0 ax 2 + bx + c =0 -b ± b 2 – 4ac  2a2a x = x = x = HA (aq) H + (aq) + A - (aq) Initial (M) Change (M) Equilibrium (M) x-x+x+x x x+x xx [H + ] = x = M pH = -log[H + ] = 2.09

NH 3 (aq) + H 2 O (l) NH 4 + (aq) + OH - (aq) K b = [NH 4 + ][OH - ] [NH 3 ] K b is the base ionization constant KbKb weak base strength Solve weak base problems like weak acids except solve for [OH-] instead of [H + ]. Weak Bases and Base Ionization Constants

HA (aq) H + (aq) + A - (aq) A - (aq) + H 2 O (l) OH - (aq) + HA (aq) KaKa KbKb H 2 O (l) H + (aq) + OH - (aq) KwKw K a K b = K w Ionization Constants of Conjugate Acid-Base Pairs

Acid-Base Equilibria and Solubility Equilibria Chapter 16 Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.

common ion effect: shift in equilibrium caused by the addition of a compound having an ion in common with the dissolved substance. The presence of a common ion suppresses the ionization of a weak acid or a weak base. Consider mixture of CH 3 COONa (strong electrolyte) and CH 3 COOH (weak acid). CH 3 COONa (s) Na + (aq) + CH 3 COO - (aq) CH 3 COOH (aq) H + (aq) + CH 3 COO - (aq) common ion

Must have: 1.A weak acid or a weak base AND 2. The salt of the weak acid or weak base buffer solution: ability to resist changes in pH upon the addition of small amounts of either acid or base. Buffer Solutions

Buffer Example Add strong acid H + (aq) + CH 3 COO - (aq) CH 3 COOH (aq) Add strong base OH - (aq) + CH 3 COOH (aq) CH 3 COO - (aq) + H 2 O (l) Consider an equal molar mixture of CH 3 COOH and CH 3 COONa

Which of the following are buffer systems? (a) KF/HF (b) KBr/HBr (c) Na 2 CO 3 /NaHCO 3 (a) HF is a weak acid and F - is its conjugate base buffer solution (b) HBr is a strong acid not a buffer solution (c) CO 3 2- is a weak base and HCO 3 - is it conjugate acid buffer solution

16.3 What are some examples of buffers?

Titrations Titration: when a solution of accurately known concentration is added gradually added to another solution of unknown concentration until the chemical reaction between the two solutions is complete. Slowly add base to unknown acid UNTIL The indicator changes color (pink) Indicator – substance that changes color at (or near) the equivalence point

Titration Points equivalence point: point at which the two solutions used in a titration are present in chemically equivalent amounts end point: point in a titration at which an indicator changes color

Common Indicators and pH Ranges

Which indicator do I choose? pH less than 7 –Indicators that change color at pH lower than 7 are used to determine the equivalence point of strong-acid/weak- base titrations. –strong-acid/weak-base titration = acidic. pH at 7 –Indicators that undergo transition at about pH 7 are used to determine the equivalence point of strong-acid/strong base titrations. –strong acids/strong bases = salt solution with a pH of 7.

The titration curve of a strong acid with a strong base. 16.5

Which indicator(s) would you use for a titration of HNO 2 with KOH ? Weak acid titrated with strong base. At equivalence point, will have conjugate base of weak acid. At equivalence point, pH > 7 Use cresol red or phenolphthalein

NaOH (aq) + HCl (aq) H 2 O (l) + NaCl (aq) OH - (aq) + H + (aq) H 2 O (l) 0.10 M NaOH added to 25 mL of 0.10 M HCl Strong Acid-Strong Base Titrations

CH 3 COOH (aq) + NaOH (aq) CH 3 COONa (aq) + H 2 O (l) CH 3 COOH (aq) + OH - (aq) CH 3 COO - (aq) + H 2 O (l) At equivalence point (pH > 7): 16.4 Weak Acid-Strong Base Titrations

HCl (aq) + NH 3 (aq) NH 4 Cl (aq) At equivalence point (pH < 7): 16.4 H + (aq) + NH 3 (aq) NH 4 + (aq) Strong Acid-Weak Base Titrations

Strong Acid-Strong Base Calcs For monoprotic acids and bases: M A V A = M B V B

Normality The value for normality is always larger than that of molarity. Normality takes into consideration the number of hydrogens/hydroxides a substance will produce when dissociated. N A V A = N B V B

Normality Example 25.0 mL of 1.5 M sample of H 3 PO 4 is neutralized by 22.5 mL of Zn(OH) 2. What is the concentration of Zn(OH) 2 ?

Antacids Video with Methyl Orange

KSP

AgCl (s) Ag + (aq) + Cl - (aq) K sp = [Ag + ][Cl - ] K sp is the solubility product constant MgF 2 (s) Mg 2+ (aq) + 2F - (aq) K sp = [Mg 2+ ][F - ] 2 Ag 2 CO 3 (s) 2Ag + (aq) + CO (aq) K sp = [Ag + ] 2 [CO ] Ca 3 (PO 4 ) 2 (s) 3Ca 2+ (aq) + 2PO (aq) K sp = [Ca 2+ ] 3 [PO ] 2 Solubility Equilibrium

16.6

Molar solubility (mol/L):number of moles of solute dissolved in 1 L of a saturated solution. Solubility (g/L) is the number of grams of solute dissolved in 1 L of a saturated solution. Solubility Definitions

What is the solubility of silver chloride in g/L ? K sp = 1.6 x AgCl (s) Ag + (aq) + Cl - (aq) K sp = [Ag + ][Cl - ] = 1.6 x Initial (M) Change (M) Equilibrium (M) s+s +s+s ss K sp = s 2 s = K sp = 1.3 x  [Ag + ] = 1.3 x M [Cl - ] = 1.3 x M Solubility of AgCl = 1.3 x mol AgCl 1 L soln g AgCl 1 mol AgCl x = 1.9 x g/L

16.6

Q vs. K sp Dissolution of an ionic solid in aqueous solution: Q = K sp Saturated solution Q < K sp Unsaturated solution No precipitate Q > K sp Supersaturated solution Precipitate will form

If 2.00 mL of M NaOH are added to 1.00 L of M CaCl 2, will a precipitate form? The ions present in solution are Na +, OH -, Ca 2+, Cl -. Only possible precipitate is Ca(OH) 2 (solubility rules). Is Q > K sp for Ca(OH) 2 ? [Ca 2+ ] 0 = M[OH - ] 0 = 4.0 x M K sp = [Ca 2+ ][OH - ] 2 = 8.0 x Q = [Ca 2+ ] 0 [OH - ] 0 2 = 0.10 x (4.0 x ) 2 = 1.6 x Q < K sp No precipitate will form From CaCl 2 : M CaCl 2 and 1.00 L = mol Ca 2+ / L From NaOH: M NaOH and L = mol OH - / L

The Common Ion Effect and Solubility The presence of a common ion decreases the solubility of the salt. What is the molar solubility of AgBr in pure water? AgBr (s) Ag + (aq) + Br - (aq) K sp = 7.7 x s 2 = K sp s = 8.8 x 10 -7

Solubility with Common Ion NaBr (s) Na + (aq) + Br - (aq) [Br - ] = M AgBr (s) Ag + (aq) + Br - (aq) [Ag + ] = s [Br - ] = s  K sp = x s s = 7.7 x s = 8.8 x s = 7.7 x > Pure waterSolution without common ion > with common ion What is the molar solubility of AgBr in M NaBr?

Solubility with and without common ion s = 8.8 x s = 7.7 x > without common ion > with common ion AgBr in water vs. AgBr in NaBr Solution

pH and Solubility The presence of a common ion decreases the solubility. Insoluble bases dissolve in acidic solutions Insoluble acids dissolve in basic solutions Mg(OH) 2 (s) Mg 2+ (aq) + 2OH - (aq) K sp = [Mg 2+ ][OH - ] 2 = 1.2 x K sp = (s)(2s) 2 = 4s 3 4s 3 = 1.2 x s = 1.4 x M [OH - ] = 2s = 2.8 x M pOH = 3.55 pH = removeadd

If the normal pH is 10.45… If you lower the pH less than Lower [OH - ] OH - (aq) + H + (aq) H 2 O (l) Increase solubility of Mg(OH) 2 If you raise the pH greater than Raise [OH - ] Decrease solubility of Mg(OH) 2 Mg(OH) 2 (s) Mg 2+ (aq) + 2OH - (aq) removeadd