Make the most of your energy December 2008 Multi-Circuit Meter Need to monitor multiple electrical services, which share a common voltage source? PowerLogic ® Multi-Circuit Meter

Schneider Electric 2 - Marketing – MCM – December 2008 About the Multi-Circuit Meter ●The PMCM is an ideal power monitoring solution for tenant submetering applications, where multiple panelboards are fed from the same power transformer. ●Multi-Circuit meters can be solutions in locales such as: ●Office Parks ●Condominiums ●Apartments ●Retail Centers ●Other densely populated properties

Schneider Electric 3 - Marketing – MCM – December 2008 The MCM Advantage ●PowerLogic’s MCM power monitoring system is the answer to your multiple drop sub-metering problems. ●The MCM provides a convenient solution for monitoring multiple electrical services, which share a common voltage source.

Schneider Electric 4 - Marketing – MCM – December 2008 Multi-Circuit measurements ●The PMCM measures kW and kWh and reports other diagnostic information. ●The PMCM reports: ●Power factor ●Volts ●Amps ●kVAR ●All of this is reported over an RS485 network using MODBUS communication protocol

Schneider Electric 5 - Marketing – MCM – December 2008 Equipment Protection ●The MCM comes complete with built-in alarm registers for: ●Over/under voltage ●Current ●KVA ●Phase loss to protect valuable equipment ●Information is available locally through an integrated display in the front of the enclosure.

Schneider Electric 6 - Marketing – MCM – December 2008 Equipment Features ●The multi-circuit meter features the following: ● Up to eight metering points with one device ● Space efficient, secure enclosure ● Integrated display and MODBUS® communications

Schneider Electric 7 - Marketing – MCM – December 2008 Device enclosure ●The MCM comes in a NEMA 12 enclosure (other types available) that measures 24”x24”x6” with a built-in display. ●This small package will save you precious installation space compared to mounting individual meters. Multiple MCMs can be mounted together and connected with communications for applications over eight meters. ●The MCM can be easily configured for monitoring eight 3-wire services or six 4-wire services, including neutral current, single phase, or three phase.